1
2
3
4
5
TB1
How to connect a Navicontrol AP 203 PLUS, 303 PLUS and
3003 PLUS autopilot to the Server.
In this connection you should be
able to steer the autopilot with
GPS data, such as BTW, XTE
etc, as reference.
You can not use wind as
steering reference.
AP203, 303 and
3003 PLUS
PROCESSOR
BOX
The settings:
Server:
Some of the calibration codes C79 - C93
have to be set to send:
GGL, RMB, RMC, APA, APB, BOD and XTE.
Navicontrol:
Please look in the manual how to activate the
autopilot to steer with GPS data as reference.
NX2T7a
OUTPUT B
GREEN5.
6.
7.
8.
YELLOW
WHITE
SCREEN
NETWORK
5.
+12 V1.
2.
3.
4
0 V
OUTPUT A
NMEA
+
