Generac X7602 APKE00014 User manual

  • Hello! I am an AI chatbot trained to assist you with the Generac X7602 APKE00014 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
PWRview™ Set-up Guide 1
INSTRUCTION SHEET
PWRview™ System Monitor Setup Guide
PWRview Overview
PWRview is Generac’s system monitoring platform.
PWRview provides detailed system statistics and real-
time energy production data.
Setting up PWRview
Pre-Registration Checklist
Verify installation is complete and all devices are
enabled.
Verify Generac PWRcell™ Inverter is powered ON.
Verify Generac PWRcell Inverter is connected to the
Internet. See the Generac PWRcell Inverter Installa-
tion Manual for details.
Verify Internet access via a browser, using a computer
or mobile device.
Registering the System
NOTE: If it is not possible to connect the system to the
Internet, call Generac Customer Service at 1-888-GEN-
ERAC (1-888-436-3722) to complete registration.
Registering the inverter automatically registers all system
components to the system owner’s profile.
1. Navigate to https://register.generac.com/. If
using a mobile device, scan the QR code on your
registration label.
2. Choose Sign Up.
3. Create a profile using the system owner’s email
address.
NOTE: Private information cannot be seen by guests
viewing the dashboard.
4. Follow the on-screen prompts to complete profile.
5. See Figure 1. Remove label (A).
A
010020
Figure 1. Inverter Registration Label Location
6. Place the installation label on the back cover of this
document as a permanent record.
Accessing PWRview
After registration, PWRview monitor can be accessed via
a customer specific URL or the PWRview mobile app.
010224
Downloading PWRview
The PWRview app can be downloaded from:
010225
Inverter Registration Label
After registering your system, place the inverter registration label here.
009650
010021
REGISTER YOUR SYSTEM
Go to
https://register.generac.com/
to register
or scan the code above.
SERIAL NUMBER:
REGISTRATION CODE:
PEEL AWAY
XXXXX-XXXXX
RRRR-RRRR
Part No. DMAN00016 Rev A 10/17/2019
©2019 Generac Power Systems, Inc.
All rights reserved.
Specifications are subject to change without notice.
No reproduction allowed in any form without prior written consent from
Generac Power Systems, Inc.
Generac Power Systems, Inc.
S45 W29290 Hwy. 59
Waukesha, WI 53189
1-888-GENERAC (1-888-436-3722)
www.generac.com
/