3M Marine High Strength Repair Filler User guide

3M
Brand
3M
Model
Marine High Strength Repair Filler
Type
User guide

3M Marine High Strength Repair Filler is a versatile and durable solution for repairing small holes above the waterline on your boat. Its reinforced formula provides excellent structural integrity, ensuring a long-lasting repair.

Key Features:

  • Reinforced filler for enhanced strength and durability
  • Ideal for repairing small holes and cracks above the waterline
  • Can be used on fiberglass, gelcoat, and wood surfaces
  • Easy to mix and apply, with a fast curing time
  • Sandable and paintable for a seamless finish

Possible Use Cases:

  • Repairing holes caused by impact or wear and tear
  • Filling in cracks or gaps in fiberglass or gelcoat

3M Marine High Strength Repair Filler is a versatile and durable solution for repairing small holes above the waterline on your boat. Its reinforced formula provides excellent structural integrity, ensuring a long-lasting repair.

Key Features:

  • Reinforced filler for enhanced strength and durability
  • Ideal for repairing small holes and cracks above the waterline
  • Can be used on fiberglass, gelcoat, and wood surfaces
  • Easy to mix and apply, with a fast curing time
  • Sandable and paintable for a seamless finish

Possible Use Cases:

  • Repairing holes caused by impact or wear and tear
  • Filling in cracks or gaps in fiberglass or gelcoat
39
Small Hole Above Waterline Product List
1
Cleaning
Pressure wash the repair area. Clean the repair area with
boat soap to remove any organic materials. Clean the
repair with acetone or approved cleaner to remove all
inorganic materials.
• 3M
™
Marine Boat Soap, PN 09034, 16 oz., bottle
• 3M
™
Sharpshooter
™
Extra Strength No-Rinse Mark Remover,
PN 16861, 1 qt.
• 3M
™
Perfect-It
™
Detail Cloth, PN 06016, 6 cloths/bag
2
Sanding
Tape the backside of the repair using 2" masking tape
to create a backing for the filler. Hand sand, block
sand, or grind the front side of the repair with 80 grit
abrasive beveling the repair area. Clean the repair area
with acetone.
• 3M
™
Imperial
™
Roloc
™
Disc, PN 01346, 3 in., 80 grade
• 3M
™
Disc Sander, Pistol Grip, PN 28547, 3 in.
3
Reinstate
Structural
Integrity
Mix and apply reinforced filler according to manufacturer's
recommendation. Allow filler to cure according to manu-
facturer's recommendation. Sand and feather the repair
with 80 grit abrasive. Clean the repair area to remove all
sanding dust.
• 3M
™
Marine High Strength Repair Filler, PN 46014, 1 gal,
4 per case
• 3M
™
Cubitron
™
II Marine Sanding Disc, PN 31379, 6 in., 80+grit,
20 discs/box
• 3M
™
Spreader Assortment, PN 05844, 3/package, 24 per case
4
Finishing
Filler
Application
Mix and apply finishing filler according to manufacturer's
recommendation. Allow filler to cure according to manu-
facturer's recommendation. Sand with 80 grit abrasive to
knock down any high spots or rough edges. Feather the
repair with 180/220 grit abrasive for gelcoat. Feather the
repair with 320/400 grit abrasive for paint.
• 3M
™
Marine Filler, PN 46018, pint
• 3M
™
Cubitron
™
II Marine Sanding Disc, PN 31379, 6 in., 80+grit,
20 discs/box
• 3M
™
Purple Clean Sanding Hookit
™
Disc, PN 01815, 6 in., P220
• 3M
™
Purple Clean Sanding Hookit
™
Disc, PN 01812, 6 in., P320
• 3M
™
Purple Clean Sanding Hookit
™
Disc, PN 01811, 6 in., P400
• 3M
™
Spreader Assortment, PN 05844, 3/package, 24 per case
Watch the video at www.3M.com/marine For ordering information, contact your 3M Sales Representative
Think About
Your Health
3M
™
E-A-R
™
Skull Screws
™
Ear Plug, PN P1300
3M
™
Half Facepiece
Respirator, PN 07182
Standard
Operating Procedures
Hole Repair
3M
™
Lexa
™
Protective Eyewear, PN 15200
  • Page 1 1

3M Marine High Strength Repair Filler User guide

3M
Brand
3M
Model
Marine High Strength Repair Filler
Type
User guide

3M Marine High Strength Repair Filler is a versatile and durable solution for repairing small holes above the waterline on your boat. Its reinforced formula provides excellent structural integrity, ensuring a long-lasting repair.

Key Features:

  • Reinforced filler for enhanced strength and durability
  • Ideal for repairing small holes and cracks above the waterline
  • Can be used on fiberglass, gelcoat, and wood surfaces
  • Easy to mix and apply, with a fast curing time
  • Sandable and paintable for a seamless finish

Possible Use Cases:

  • Repairing holes caused by impact or wear and tear
  • Filling in cracks or gaps in fiberglass or gelcoat
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents