3M Marine High Strength Repair Filler User guide

3M
Brand
3M
Model
Marine High Strength Repair Filler
Type
User guide

3M Marine High Strength Repair Filler is a two-part, high-strength epoxy adhesive specifically designed for repairing fiberglass boat hulls above or below the waterline. It provides a strong, durable bond that is resistant to water, chemicals, and impact. It can be used to repair holes, cracks, and gouges, and can be sanded and painted once cured.

3M Marine High Strength Repair Filler is a two-part, high-strength epoxy adhesive specifically designed for repairing fiberglass boat hulls above or below the waterline. It provides a strong, durable bond that is resistant to water, chemicals, and impact. It can be used to repair holes, cracks, and gouges, and can be sanded and painted once cured.

37
2 Sided Small to Medium Hole Repair Above/
Below the Waterline - Frontside
Product List
1
Cleaning
Pressure wash the repair area to remove any fouling that
has accumulated. Clean the repair area with boat soap
to remove organic debris on the surface. Clean the area
with acetone to remove any inorganic matarial on and
around the repair area.
• 3M
™
Marine Boat Soap, PN 09034, 16 oz., bottle
• 3M
™
Sharpshooter
™
Extra Strength No-Rinse Mark Remover,
PN 16861, 1 qt.
• 3M
™
Perfect-It
™
Detail Cloth, PN 06016, 6 cloths/bag
2
Grinding
Grind the repair area with an 80 grit Roloc
™
abrasive. Grind
2" - 3" beyond the repair area. Bevel the edge of the hole
to be repaired. Clean the repair area with acetone.
• 3M
™
Imperial
™
Roloc
™
Disc, PN 01346, 3 in., 80 grade
• 3M
™
Disc Sander, Pistol Grip, PN 28547, 3 in.
3
Reinstate
Structural
Integrity
Mix and apply reinforced repair filler according to the
manufacturer's recommendation. Allow reinforced repair
filler to cure according to manufacturer's recommendation.
Sand and feather with 80 grit abrasive. Clean the repair
area with acetone or another approved cleaner.
• 3M
™
Marine High Strength Repair Filler, PN 46014, 1 gal,
4 per case
• 3M
™
Cubitron
™
II Marine Sanding Disc, PN 31379, 6 in., 80+grit,
20 discs/box
4
Finishing
Filler
Application
Mix and apply premium filler according to manufacturer's
recommendation. Allow filler to cure according to manufac-
turer's recommendation. Sand the filler with 80 grit abrasive
and feather the repair with 180/220 grit abrasive for gelcoat.
Feather the repair with 320/400 grit abrasive for paint. Clean
the repair area with acetone or approved cleaner.
• 3M
™
Marine Premium Filler, PN 46006, 1 gal, 4 per case
• 3M
™
Cubitron
™
II Marine Sanding Disc, PN 31379, 6 in., 80+grit,
20 discs/box
• 3M
™
Purple Clean Sanding Hookit
™
Disc, PN 01816, 6 in., P180
• 3M
™
Purple Clean Sanding Hookit
™
Disc, PN 01815, 6 in., P220
• 3M
™
Spreader Assortment, PN 05844, 3/package, 24 per case
5
Gelcoat
Application
See Gelcoat Application Page 8
Watch the video at www.3M.com/marine For ordering information, contact your 3M Sales Representative
Think About
Your Health
3M
™
E-A-R
™
Skull Screws
™
Ear Plug, PN P1300
3M
™
Half Facepiece
Respirator, PN 07182
Standard
Operating Procedures
Hole Repair
3M
™
Lexa
™
Protective Eyewear, PN 15200
  • Page 1 1

3M Marine High Strength Repair Filler User guide

3M
Brand
3M
Model
Marine High Strength Repair Filler
Type
User guide

3M Marine High Strength Repair Filler is a two-part, high-strength epoxy adhesive specifically designed for repairing fiberglass boat hulls above or below the waterline. It provides a strong, durable bond that is resistant to water, chemicals, and impact. It can be used to repair holes, cracks, and gouges, and can be sanded and painted once cured.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents