Pottinger EUROBOSS 370 T Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Pottinger EUROBOSS 370 T Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
0567.en.80V.0
Original Operating Instructions
Self-loading trailers
EUROBOSS 370 T
567
Machine No.: +..01148
PÖTTINGER - Trust creates Affinity since 1871
"Quality pays for itself." We therefore apply the highest quality standards to our products,
which are permanently monitored by our in-house quality management team and our man-
agement board Because the safety, perfect function, highest quality and absolute reliability of
our machines in operation are the core competencies for which we stand.
Technical alterations
There may be deviations between these document and the product as we are constantly de-
veloping our products. Therefore no claims may be derived from the data, illustrations and
descriptions. Please contact your Specialist Service Centre for any binding information about
specific features of your machine.
Legal notes
Please note that only the German operating manual constitutes the original operating manual
in regards to the guidelines 2006/42/EC. Operating manuals on languages different than
German, are translations of the German original manual of operation.
We would ask you to please understand that changes to the scope of supply with regard to
form, equipment and technical specifications are possible at any time.
Any form of reprint, translation or reproduction, including excerpts, requires the written appro-
val of PÖTTINGER Landtechnik GmbH.
All rights according to copyright law are expressly reserved by PÖTTINGER Landtechnik
GmbH.
© PÖTTINGER Landtechnik GmbH
Guarantee and warranty
Please note that the statutory guarantees and warranties granted voluntarily by PÖTTINGER
Landtechnik GmbH can only be invoked for damage stemming from construction, production
or material faults.
PÖTTINGER Landtechnik GmbH cannot be held liable for damage stemming from the use of
consumables such as belts, chains, shafts, gears, tyres, knives teeth or tarpaulins or covers
made from fabric materials or for damage stemming directly or indirectly from contact with
foreign bodies (stones, metal fragments, etc.).
You can find additional information about your machine in MyPöttinger.
Are you looking for suitable accessories for your machine? No problem! All the information
you require is here at your disposal. And if we don't have what you're looking for, then your
Specialist Service Centre is there for you with help and advice.
Scan the QR code on the type plate of the machine or visit http://www.mypoettinger.com
2 | Original Operating Instructions EUROBOSS 370 T 0567.en.80V.0
Dear Customer
The Operating instructions will allow you to become acquainted with your machine and pro-
vide clear information about safe and correct handling, maintenance and care. Take the time
to read the instructions all the way through.
The operating instructions are a part of the machine. They must be stored in an accessible
location at the workplace for the entire service life of the machine. The user must independ-
ently supplement the instructions regarding national regulations on accident prevention, traf-
fic safety and environment protection.
All persons that are entrusted with the operation, maintenance or transport of the machine
must read and understand these instructions, in particular the safety instructions, before be-
ginning work. Any warranty claims lapse on non-observance of these Instructions.
If you have any questions regarding the contents of these Operating instructions or further
questions regarding the machine, please contact your PÖTTINGER service partner.
Correct maintenance and care according to the defined maintenance intervals will ensure the
operational and traffic safety, as well as the reliability of your machine.
Use only original spare parts or spare parts and accessories that are approved by PÖTTING-
ER Landtechnik GmbH. Only original spare parts that are approved by us have been tested
and accordingly are appropriate for use in your machine. The use of any unapproved parts
forfeits any guarantee or guarantee claim. Even after the end of the warranty period we rec-
ommend using original spare parts to ensure the performance of your machine.
The Product Liability Law obligates manufacturers/dealers to transfer operating instructions
when selling machines, as well as to instruct clients regarding the safety, operation and
maintenance regulations concerning the machine. Confirmation in the form of a declaration
of transfer is required to verify that the implement and Instructions have been transferred cor-
rectly. The declaration of transfer is delivered together with the machine.
Every self-employed person and farmer is an entrepreneur within the meaning of the product
liability legislation. Therefore corporate property damage according to the Product Liability
Law is excluded from the liability of PÖTTINGER. Corporate property damage according to
the Product Liability Law refers to damage caused by the machine. Damage to the machine
is not property damage according to the Product Liability Law.
The operating instructions are a part of the machine, therefore you must transfer them when
selling/transferring the machine to a new user. Train and instruct the new owner in the regu-
lations stated.
The PÖTTINGER service team wishes you the best of luck.
0567.en.80V.0 Original Operating Instructions EUROBOSS 370 T | 3
You will find the following representations in this operating manual
DANGER
If you do not follow the instructions in a text section with this marking, there is a risk
of fatal or life-threatening injury.
All instructions in such text sections must be followed!
WARNING
If you do not follow the instructions in a text section with this marking, there is a risk
of severe injury.
All instructions in such text sections must be followed!
CAUTION
If you do not follow the instructions in a text section with this marking, there is a risk
of injury.
All instructions in such text sections must be followed!
NOTICE
If you do not follow the instructions in a text section with this marking, there is a risk
of damage to property.
All instructions in such text sections must be followed!
TIP
Marked text sections contain recommendations and advice on handling the machine.
ENVIRONMENT
Marked text sections contain advice on the subject of environmental protection.
Equipment marked as optional is available only for certain machine models or in certain
countries.
Images may differ in detail to your machine and should only be considered as indicative.
4 | Original Operating Instructions EUROBOSS 370 T 0567.en.80V.0
Instructions for product handover
Please verify the listed items in accordance with the product liability obligation
Please, tick off where appropriate.
Machine checked according to delivery note. All packing materials removed, all
safety devices, cardan shafts and control elements present.
Machine operation, commissioning and maintenance discussed with and explained
to the clients using the operational instructions.
Tyre air pressure verified.
Tightness of wheel nuts verified.
Reference to correct p.t.o. speed and direction of rotation.
Adaptation to tractor complete; three point adjustment, drawbar height, attachment
of handbrake lever in tractor cab, forced steering set, compatibility of all necessary
electrical, hydraulic and pneumatic connectors to tractor checked and established.
Cardan shaft correctly cut to length.
Test run of all machine functions in addition to parking brake and operating brake
completed and no defects noted.
Function explanation during test run.
Tilting to transport and working position explained.
Information regarding optional equipment provided.
References made to compulsory reading of the operational instructions.
Confirmation is required to prove that the machine and the operating instructions have been
properly handed over. For this purpose you have received a confirmation e-mail from PÖT-
TINGER. If you have not received this mail, please contact your local dealer. Your dealer can
fill in the handover declaration online.
Austria
PÖTTINGER Landtechnik GmbH
Industriegelände 1
4710 Grieskirchen
Phone+43 7248 600-0
Fax+43 7248 600-2513
info@poettinger.at
0567.en.80V.0 Original Operating Instructions EUROBOSS 370 T | 5
Amendment index
Date Index Amendment reason Amended chapter
6 | Original Operating Instructions EUROBOSS 370 T 0567.en.80V.0
Truck transport
Unload the machine by crane........................................................................................... 14
Factory standard tightening torque
Tightening torque.............................................................................................................. 15
Layout and function
Functional elements.......................................................................................................... 16
Accessories included in the scope of delivery................................................................... 18
Upgrade program.............................................................................................................. 18
At a glance
Identification...................................................................................................................... 19
Type plate with CE marking......................................................................................... 19
Description
EU - declaration of conformity........................................................................................... 20
Intended use..................................................................................................................... 21
Non-approved useage....................................................................................................... 21
Technical data
Dimensions....................................................................................................................... 22
Attachment........................................................................................................................ 22
Weights............................................................................................................................. 22
Tyres — chassis................................................................................................................ 23
Blade................................................................................................................................. 23
Power requirements.......................................................................................................... 24
Hydraulics ........................................................................................................................ 24
Electrics............................................................................................................................. 24
Noise emission.................................................................................................................. 24
Safety and the environment
Safety advice..................................................................................................................... 25
Qualification of personnel............................................................................................ 25
Performing maintenance work..................................................................................... 25
Contents
0567.en.80V.0 Original Operating Instructions EUROBOSS 370 T | 7
Organisational measures............................................................................................. 25
Fuel efficiency and soil protection............................................................................... 25
Maintaining operational safety..................................................................................... 25
Special hazards........................................................................................................... 26
Safety devices................................................................................................................... 27
Warning signs.............................................................................................................. 27
Traffic safety equipment.............................................................................................. 33
Environmental protection.................................................................................................. 37
Handling hazardous substances................................................................................. 37
Disposal of the machine.............................................................................................. 37
Control terminal operation
SELECT CONTROL.......................................................................................................... 39
SELECT CONTROL Terminal overview...................................................................... 39
Keys / Softkeys............................................................................................................ 40
Basic functions............................................................................................................ 41
SELECT CONTROL Operating diagram........................................................................... 41
Turn terminal on/off and activate START menu................................................................ 42
"WORK" menu............................................................................................................. 42
"SET" menu................................................................................................................. 45
“CONFIG” menu.......................................................................................................... 46
"TEST" menu............................................................................................................... 47
"DATA" menu.............................................................................................................. 48
“DIAG” menu (diagnosis menu)................................................................................... 50
DIRECT CONTROL Terminal operation........................................................................... 51
DIRECT CONTROL Terminal overview...................................................................... 51
DIRECT CONTROL keys/soft keys............................................................................. 53
Basic functions............................................................................................................ 54
Turn terminal on/off and open "START" menu.................................................................. 54
"WORK" menu............................................................................................................. 55
"SET" menu................................................................................................................. 61
Calibrating pick-up angle sensors..................................................................................... 62
“CONFIG” menu.......................................................................................................... 63
"TEST" menu............................................................................................................... 65
"DATA" menu.............................................................................................................. 69
“DIAG” menu (diagnosis menu)................................................................................... 70
POWER CONTROL.......................................................................................................... 71
Overview of the POWER CONTROL terminal............................................................. 71
Contents
8 | Original Operating Instructions EUROBOSS 370 T 0567.en.80V.0
POWER CONTROL keys/soft keys............................................................................. 74
Basic functions............................................................................................................ 75
Turn terminal on/off and activate START menu................................................................ 75
System Menu.................................................................................................................... 76
POWER CONTROL Operating diagram........................................................................... 77
"WORK" menu............................................................................................................. 78
"SET" menu................................................................................................................. 86
“CONFIG” menu (configuration menu)........................................................................ 99
"TEST" menu............................................................................................................... 103
Activating "DATA" menu.............................................................................................. 106
ISOBUS error messages............................................................................................. 108
POWER CONTROL Alarm messages......................................................................... 111
FIELD OPERATOR 130 Terminal operation..................................................................... 114
Field Operator 130 Terminal overview........................................................................ 114
Warning messages...................................................................................................... 114
System menu............................................................................................................... 115
External charging adapter........................................................................................... 120
Field Operator terminal holder..................................................................................... 121
ISOBUS............................................................................................................................. 121
EXPERT 75 Terminal overview................................................................................... 121
Input keypad...................................................................................................................... 122
CCI 100 Terminal overview......................................................................................... 123
Input keypad...................................................................................................................... 123
CCI 1200 Terminal overview............................................................................................. 125
ISOBUS operation....................................................................................................... 125
ISOBUS keys/softkeys...................................................................................................... 125
Input masks....................................................................................................................... 127
Selection masks................................................................................................................ 128
Terminal on /off - "START" menu...................................................................................... 129
ISOBUS operating diagram............................................................................................... 131
Activate “WORK” menu (operating mode)........................................................................ 132
Activating "TRANSPORT" menu....................................................................................... 145
"SET" menu....................................................................................................................... 146
“CONFIG” menu (configuration menu).............................................................................. 160
"TEST" menu.................................................................................................................... 163
Activating "DATA" menu................................................................................................... 167
ISOBUS error messages................................................................................................... 168
ISOBUS alarm messages................................................................................................. 172
Contents
0567.en.80V.0 Original Operating Instructions EUROBOSS 370 T | 9
Isobus "Auxiliary" function (AUX)...................................................................................... 175
Valves / cover / auxiliary equipment
Opening / closing cover and valves.................................................................................. 178
Side protection / front protection operation.................................................................. 178
Auxiliary and special functions.......................................................................................... 178
Support stand with support wheel handling................................................................. 178
Operation
Initial operation.................................................................................................................. 181
Determine tractor ballast............................................................................................. 181
Determine the required tractor ballast weights using the weighing method...................... 182
Determine the required tractor ballast weights using calculation...................................... 183
Adapting the tractor hydraulics.................................................................................... 184
Adjustment of the cardan shaft.................................................................................... 185
Check PTO drive............................................................................................................... 187
Emergency-brake adjustment bolt position (hydraulic single pipe brake H1L)............ 187
Adjusting and retrofitting................................................................................................... 188
Roof ropes................................................................................................................... 189
Adjust pivoting drawbar............................................................................................... 189
Check / adjust reversing tilt protection.............................................................................. 194
Adjusting the insertable handbrake............................................................................. 195
Breakaway cable attachment (emergency brake valve hydraulic single pipe brake
H1L)............................................................................................................................. 197
Adjusting the hose holder............................................................................................ 198
Adjusting the telescopic tailgate struts (option)........................................................... 200
Telescopic tailgate strut setting (option with cross conveyor belt)............................... 202
Mechanical cross conveyor belt working position / transport position......................... 205
Detaching the cross conveyor belt.............................................................................. 207
Detaching the beater rotors (option)............................................................................ 209
Detach third dosing roller.................................................................................................. 212
Coupling............................................................................................................................ 215
Attach drawbar............................................................................................................ 216
Air pressure - braking system (Option)........................................................................ 217
Connect cardan shaft.................................................................................................. 219
Connecting the overrun brake breakaway cable......................................................... 220
Attaching the safety cable........................................................................................... 221
Connect hydraulic hoses............................................................................................. 221
Contents
10 | Original Operating Instructions EUROBOSS 370 T 0567.en.80V.0
Load sensing valve adjustment................................................................................... 224
Connect cables............................................................................................................ 225
Fit EXPERT 75 ISOBUS terminal ............................................................................... 226
DIRECT CONTROL Terminal installation.................................................................... 227
Mounting the POWER CONTROL terminal................................................................. 228
Mounting the SELECT CONTROL terminal................................................................ 229
Work assignment.............................................................................................................. 230
Emergency brake valve Hydraulic brake .................................................................... 231
Manual load matching valve setting (hydraulic brake)................................................. 231
Permissible cardan shaft angle................................................................................... 232
Scraper floor rear operation (option)........................................................................... 232
Loading procedure....................................................................................................... 234
Loading procedure general tips......................................................................................... 234
Adjusting the pick-up......................................................................................................... 235
Loading procedure............................................................................................................ 236
Unloading procedure................................................................................................... 238
Unloading with lowered dry fodder top-frame................................................................... 238
Unloading with dosing unit................................................................................................ 239
Unloading without dosing rollers....................................................................................... 240
Decommissioning ............................................................................................................. 240
Switching off the machine............................................................................................ 241
Unhitching......................................................................................................................... 241
Uncoupling the cardan shaft........................................................................................ 242
Detach the machine from the tractor........................................................................... 242
Care and maintenance
Ensure operational readiness........................................................................................... 244
General tips....................................................................................................................... 244
Lifting jack lifting points..................................................................................................... 245
Trailer brake valve quick release position (air brake)........................................................ 245
Oil filling, oil drainage and oil level control plugs............................................................... 246
Cardan shaft maintenance................................................................................................ 247
Checking the friction clutch.......................................................................................... 248
Check the cardan shaft cam clutch............................................................................. 249
Daily maintenance............................................................................................................. 249
Check the brake hoses and hose couplings................................................................ 249
Draining the compressed air tank................................................................................ 250
Check/correct tyre pressures....................................................................................... 250
Contents
0567.en.80V.0 Original Operating Instructions EUROBOSS 370 T | 11
Check hydraulic system............................................................................................... 253
Check / change lighting of lamps................................................................................. 254
Checking/correcting overrun brake.............................................................................. 257
Check / replace warning signs, warning triangles, warning sheets............................. 260
Before every season......................................................................................................... 261
Topping up the gear oil................................................................................................ 261
Change gear oil........................................................................................................... 262
Checking/lubricating the traction coupling ball............................................................ 263
Before every season and then after every 40 operating hours......................................... 263
Lubricate the pick-up drive chains............................................................................... 263
After every season............................................................................................................ 264
Clean outside of machine............................................................................................ 264
As required........................................................................................................................ 265
Adjust cutter bar.......................................................................................................... 265
Setting cutter swivelling out mechanism...................................................................... 266
Adjust cutter bar stop screws...................................................................................... 267
Fold out or swivel out sideways the cutter bar............................................................. 268
Cutter unit removal (rigid cutter bar)............................................................................ 272
Cutter removal/installation (hydraulic cutter bar)......................................................... 274
Knife sharpening.......................................................................................................... 275
Clean the cutter safety device..................................................................................... 276
Hydraulic oil filter change............................................................................................ 277
Clean terminal............................................................................................................. 277
Checking/retensioning the scraper floor chains........................................................... 278
After service life................................................................................................................. 279
Middle of the season................................................................................................... 279
Check the gear oil fill level................................................................................................ 279
After every season....................................................................................................... 279
Check/adjust wheel brake cylinder piston stroke (air brake)............................................. 279
Initially after 10 hours, then first loaded journey after tyre changes, then every
500 hours..................................................................................................................... 281
Retighten washers............................................................................................................ 281
Every 200 operating hours.......................................................................................... 282
Check the brake linings..................................................................................................... 282
Every 40 loads............................................................................................................. 282
Lubricate press conveyor combs...................................................................................... 282
Lubricate the dosing roller drive chains............................................................................. 283
Lubricate pivotal drawbar protection................................................................................. 283
Contents
12 | Original Operating Instructions EUROBOSS 370 T 0567.en.80V.0
Every 80 loads............................................................................................................. 284
Lubricate press main bearing............................................................................................ 284
Adjust the press drive chain.............................................................................................. 284
1x per month during the operating period.................................................................... 285
Drawbar eye 548.76.421.0 (option) wear check/replacement........................................... 285
Every 200 hours and after more than 3 months stationary.......................................... 286
Check standard brake linkage adjuster............................................................................. 286
x per year..................................................................................................................... 287
Check/correct adjustment of sensors................................................................................ 287
Every 4 years............................................................................................................... 291
Check and adjust hydraulic pressure accumulator........................................................... 291
Every 6 years............................................................................................................... 293
Hydraulic hoses................................................................................................................. 293
Lubrication chart................................................................................................................ 293
Lubrication chart................................................................................................................ 295
Operating materials
Equipment specification.................................................................................................... 297
Working materials and fill quantities.................................................................................. 297
Help and advice
Cardan shaft - cam clutch................................................................................................. 298
Dosing unit cam clutch...................................................................................................... 298
What to do if...................................................................................................................... 298
Inertia brake troubleshooting....................................................................................... 299
Lighting........................................................................................................................ 300
Malfunctions/causes/remedies.................................................................................... 300
Hydraulics emergency actuation................................................................................. 302
Machine monitoring alarm messages.......................................................................... 307
ALB Regulator............................................................................................................. 309
Contents
0567.en.80V.0 Original Operating Instructions EUROBOSS 370 T | 13
Unload the machine by crane
Prerequisite
Take note of technical information (weight)!
Only use a lifting device with adequate dimensions.
Use lifting gear with lifting beams, to avoid pushing side walls.
Attachment points for lifting gear
Implementation
Carefully attach and secure hoists to the attachment points.
CAUTION
Danger of injury through machine falling!
To remain under the suspended load is prohibited!
Remove the fastenings from the loading surface.
Lift the machine horizontally from the loading surface and place on level, load-bearing
ground.
Remove hoist.
Truck transport
14 | Original Operating Instructions EUROBOSS 370 T 0567.en.80V.0
Tightening torque
This factory standard applies to all metric bolts for which no special tightening torque is
specified in the drawing/manual. The relevant grade is visible on the bolt head.
The values given are nominal and are valid for a head friction rate of IJ=0.14 and a
thread friction of IJ=0.125 Slight tensioning force differences can exist through differing
friction rates. The values given are to be kept to a tolerance of ± 10%.
By using the given tightening torque and the existing friction rate used, then up to 90%
of the minimum yield strength of the bolt material is used in accordance with DIN ISO
898 .
If a specific tightening torque is given for a bolt connection, then all these bolt connec-
tions are to be tightened to the specified tightening torque using a torque wrench.
Thread Grade 8.8 Grade 10.9
Tightening tor-
que in Nm
Tensioning force
in N
Tightening tor-
que in Nm
Tensioning force
in N
M 4 3.1 4000 4.4 5700
M 5 6.2 6600 8.7 9300
M 6 10.5 9300 15 13000
M 8 25 17000 36 24000
M 10 50 27000 70 38000
M 12 86 39500 121 56000
M 14 135 54000 195 76000
M 16 215 75000 300 105000
M 20 410 117000 580 164000
M24 710 168000 1000 237000
M 30 1400 270000 2000 380000
M 8 x 1 27 18700 38 26500
M 10 x 1.25 53 29000 74 41000
M 12 x 1.25 95 44500 130 63000
M 14 x 1.5 150 60000 210 85000
M 16 x 1.5 230 81000 320 115000
M 20 x 1.5 460 134000 650 189000
M 24 x 2 780 188000 1090 265000
Factory standard tightening torque
0567.en.80V.0 Original Operating Instructions EUROBOSS 370 T | 15
Functional elements
Names and functions
Pos. Element Function
1 Articulated drawbar Hydraulically actuated. Attaching to tractor and setting
the machine height.
2 Support wheel Manually actuated. Placing the machine on a level and
load-bearing surface.
3 Pick up The pick-up adapts to the uneven ground due to the
flexible suspension and enables quick and clean picking
up of the crop from the field and transfer to the rotor and
cutting unit
4 Cutting unit Shredding of the crop. Cutter replacement via quick-
change cutter holder.
5 Parking brake Secure the machine against rolling.
6 Scraper floor Hydraulically actuated. Conveys the loaded material
during loading and unloading with selectable speed.
7 Cross conveyor belt (op-
tion)
Sideways unloading together with beater rotors. Un-
loading side can be selected manually.
8 Tailgate Hydraulically actuated. Own operation mode for cross-
conveyor operation.
9 Beater rotors (option) Optionally with 2 or 3 rollers.
10 Dry crop extension Hydraulically swivelled. Special for low density crops
such as straw or hay.
Layout and function
16 | Original Operating Instructions EUROBOSS 370 T 0567.en.80V.0
Layout and function
0567.en.80V.0 Original Operating Instructions EUROBOSS 370 T | 17
Accessories included in the scope of delivery
B = Splash-proof box for the accompanying documentation
D = Drawbar immobilizer (differs depending on drawbar design)
No illustration = chocks
Accompanying documentation
Operating manual
Parts list
Delivery declaration; See "Instructions for product handover" on page 5.
Upgrade program
The PÖTTINGER Landtechnik GmbH upgrade program offers many upgrade possibilities.
You can receive additional information from your service dealer.
Layout and function
18 | Original Operating Instructions EUROBOSS 370 T 0567.en.80V.0
Identification
Type plate with CE marking
T = Vehicle identification plate position
(1) Type plate
Before making any enquiries about the machine or technical details, note down the model
and type from the nameplate and keep them handy. Chassis no. and/or serial no. are re-
quired for ordering spare parts.
(2) CE label
The CE label confirms that the machine conforms with the provisions of the Machinery Direc-
tives.
Included data
The following data is displayed on the identification plate for each machine type and design.
Data
Chassis number
Model
Vehicle identification number
Type
Type number
Serial number
Basic weight
Permissible total weight
Model year
Bearing load
Axle load per axle
Model year
Year of mfr
At a glance
0567.en.80V.0 Original Operating Instructions EUROBOSS 370 T | 19
EU - declaration of conformity
Description
20 | Original Operating Instructions EUROBOSS 370 T 0567.en.80V.0
1/316