East West Furniture GONE15 Assembly Instructions

Brand: East West Furniture

Model: GONE15

Type: Assembly Instructions

Gordon Round Night Stand End Table -1 -

ASSEMBLY INSTRUCTIONS

SKU: GONE

Description: Gordon Round Night Stand End Table

Product Dimension: 19.6"Wx19.6”Dx22"H

Cube Size : 21.2”x21.2”x10”

NW: 19.8 LBS

GW: 19.8 LBS

175 Southbelt Industrial Dr,

Houston, TX 77047

Email:sales@eastwestfurniture.net

Gordon Round Night Stand End Table

IMPORTANT NOTE:

- Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.

- Remove all wrapping material, including staples & packing straps before you start to assemble.

- DO NOT tighten all screws and bolts until completely assembled.

- Keep all hardware parts out of reach of children.

PART LIST

When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have the following parts:

HARDWARE LIST

When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware:

NO Description Qty Sketch NO Description Qty Sketch

1 Bolt Screw

(M6x40mm) 4 2 Allen key 1

NO Description Qty Sketch NO Description Qty Sketch

A Chest 1 B Leg 4

ASSEMBLY TOOLS REQUIRED

NOT INCLUDED

BEFORE ASSEMBLY

Thank you for purchasing our product. This product has been designed for easy assembly and long lasting use. Please take

the time to read and follow the assembly instructions carefully.

Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Please separate, identify, and