International Concepts TC-929 Operating instructions

International Concepts
Brand
International Concepts
Model
TC-929
Type
Operating instructions

International Concepts TC-929 is a storage chest designed for easy assembly and constructed for durability. It features a spacious interior, perfect for storing various items. The chest is equipped with hinges for easy opening and closing, and its sturdy construction ensures stability and longevity. Assembly requires basic tools such as a screwdriver and Allen key, and all necessary hardware is included.

International Concepts TC-929 is a storage chest designed for easy assembly and constructed for durability. It features a spacious interior, perfect for storing various items. The chest is equipped with hinges for easy opening and closing, and its sturdy construction ensures stability and longevity. Assembly requires basic tools such as a screwdriver and Allen key, and all necessary hardware is included.

ITEM NO.: TC-929
REVISED SEP 19, 2014
Printed in Vietnam
- 1 -
ASSEMBLY INSTRUCTIONS
Description
Item No.
: STORAGE CHEST 29 IN
: TC-929
ITEM NO.: TC-929
REVISED SEP 19, 2014
Printed in Vietnam
- 2 -
BEFORE ASSEMBLY
Thank you for purchasing this quality product. This product has been designed for easy assembly and
constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning
assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is
missing or defective, please contact the store where purchased. If hardware is missing, or you need help with
assembly, please call toll free 888-944-8396.
IMPORTANT NOTE:
- Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from
being scratched.
- Remove all wrapping material, including staples & packing straps before you start to assemble.
- DO NOT tighten all screws and bolts until completely assembled.
- Keep all hardware parts out of reach of children.
WARNING:
Long exposure to rubber or soft plastic may cause a chemical reaction and damage the finish of your
product. Protect the surface of the product with cloth if you are using any product with rubber feet or
base.
ASSEMBLY TOOLS REQUIRED
NOT INCLUDED
ITEM NO.: TC-929
REVISED SEP 19, 2014
Printed in Vietnam
- 3 -
PART LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have the following parts:
NO
Description
Sketch
NO
Description
Qty
Sketch
A
Top panel
D
Front
panel
1
B
Back
panel
E
Side panel
(L&R)
2
C
Support
bottom
panel
F
Bottom
panel
1
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have all of the following hardware:
NO
Description
Sketch
NO
Description
Qty
Sketch
1
BOLT
(M6x30mm)
5
Short screw
(M4x15mm)
22
2
Spring
washer
(ɸ6.5x11mm)
6
Long screw
(M4x30mm)
4
3
Flat washer
(ɸ6.5x13mm)
7
Allen key
1
4
Hinge
ITEM NO.: TC-929
REVISED SEP 19, 2014
Printed in Vietnam
- 4 -
STEP 1
Attach Back panel (B) and Front panel (D) to Side panel (E) with Bolts (1), and washers (2), (3), Tighten
with Allen key (7).
Attach Support bottom panel (C) to Back and front panel with Screw (6) as shown below. Tighten
with a screwdriver.
ITEM NO.: TC-929
REVISED SEP 19, 2014
Printed in Vietnam
- 5 -
Slide Bottom panel (F) into groove of the unit as shown below. Then attach Side panel (E) to the unit
with bolts (1), washers (2) and (3). Tighten with Allen key (7).
Attach top (1) to the unit with screw (5) as shown below. Tighten with a screwdriver.
STEP 3
Attach Hinges (4) to the unit with Screws (5) as shown below.
STEP 2
4
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

International Concepts TC-929 Operating instructions

International Concepts
Brand
International Concepts
Model
TC-929
Type
Operating instructions

International Concepts TC-929 is a storage chest designed for easy assembly and constructed for durability. It features a spacious interior, perfect for storing various items. The chest is equipped with hinges for easy opening and closing, and its sturdy construction ensures stability and longevity. Assembly requires basic tools such as a screwdriver and Allen key, and all necessary hardware is included.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents