Operator's manual
TruTool S 130 (1A5)
Charger CLi 10.8
V
english
Contents TruTool S 130 (1A5)
Charger CLi 10.8 V
Contents
1. Safety............................................................................................. 3
1.1 General safety information ............................................................. 3
1.2 Specific safety for shears ............................................................... 5
1.3 Specific safety for Battery/ Charger................................................ 6
1.4 Lithium-ion Battery Disposal........................................................... 9
2. Description.................................................................................. 10
2.1 Intended use................................................................................. 11
2.2 Noise and vibration information.................................................... 12
2.3 Technical data TruTool S 130 ...................................................... 14
3. Setting work ................................................................................ 15
3.1 Setting the cutting clearance ........................................................ 15
3.2 Loading the rechargeable battery................................................. 15
3.3 Changing the rechargeable battery.............................................. 19
4. Operation..................................................................................... 20
5. Maintenance................................................................................ 22
5.1 Changing the tool ......................................................................... 24
6. Original accessories and wearing parts .................................. 26
Declaration of conformity
Warranty
Replacement parts list
2 E649en_03
TruTool S 130 (1A5)
Charger CLi 10.8 V
Safety
3
1. Safety
1.1 General safety information
x Read the operator's manual and safety information in
their entirety before starting up the machine. Closely
follow the instructions given.
x Adhere to the safety regulations in accordance with DIN
VDE, CEE, AFNOR and to the specific regulations of the
country of operation.
Tab. 1
Read all safety warnings (order no.
0125699) and all instructions!
¾ Failure to follow the warnings and
instructions may result in electric shock,
fire and/or serious injury.
¾ Save all warnings and instructions for
future reference.
WARNIN
G
Risk of fatal injury from electric shock
¾ Do not touch the electrical contacts on
the charger or on the rechargeable
battery.
WARNIN
G
E649en_03
Safety TruTool S 130 (1A5)
Charger CLi 10.8 V
E649en_03
Risk of injury from the rechargeable battery.
¾ Always remove the rechargeable battery
from the machine prior to maintenance
work.
¾ Check the machine and the rechargeable
battery for damage before each use.
¾ Keep the machine dry and do not operate
it in damp rooms.
¾ Charge the exchangeable battery of the
Li-Ion Energy 10.8 V system only with the
charger of the Li-Ion Energy 10.8 V
system.
¾ Do not attempt to open the exchangeable
batteries or the charger.
¾ Do not dispose of the exchangeable bat-
teries in fires or household waste.
Risk of injury due to improper handling.
¾ Wear safety glasses, hearing protection,
protective gloves and work shoes when
working at the machine.
¾ Have servicing and inspections of hand-
held electric tools carried out by a
qualified specialist. Only use original
accessories provided by TRUMPF.
WARNIN
G
WARNIN
G
4
TruTool S 130 (1A5)
Charger CLi 10.8 V
Safety
5
1.2 Specific safety for shears
Risk of injury due to improper handling.
¾ Make sure the machine is always in a
stable position when operating it.
¾ Never touch the tool while the machine is
running.
¾ Always operate the machine away from
your body.
Health risk from dust.
Some materials produce harmful dust
during cutting.
¾ Make sure the work station is sufficiently
ventilated.
¾ When working with the machine, wear
safety glasses, dust masks and protec-
tive gloves.
Risk of injury to hands.
¾ Do not reach into the processing line with
your hands.
¾ Use both hands to hold the machine.
Risk of possible injury from flying chips.
¾ Only work with the chip deflector 6
mounted. Take care that the chip
deflector is not damaged or bent.
WARNIN
G
WARNIN
G
WARNIN
G
WARNIN
G
E649en_03
Safety TruTool S 130 (1A5)
Charger CLi 10.8 V
E649en_03
1.3 Specific safety for Battery/ Charger
¾ Before using battery charger, read all instructions and cautionary
markings on battery charger, battery pack, and product using battery.
Risk of injury from the battery or charger.
When batteries are not in tool or charger,
keep them away from metal objects.
¾ For example, to protect terminals from
shorting do not place batteries in a tool
box or pocket with nails, screws, keys,
etc. Fire or injury may result.
¾ Do not put batteries into fire or expose to
high heat. They may explode.
Use only the charger which accompanied
your product or direct replacement
aslisted in the catalog or this manual.
¾ Do not substitute any other charger. Use
only TRUMPF approved chargers with
your product.
¾ See Description and Specifications.
WARNIN
G
NOTIC
E
Do not disassemble charger or operate the
charger if it has received a sharp blow,
been dropped or otherwise damaged in
anyway. Replace damaged cord or plugs
immediately.
¾ Incorrect reassembly or damage may
result in electric shock or fire.
NOTIC
E
6
TruTool S 130 (1A5)
Charger CLi 10.8 V
Safety
7
Do not recharge battery in damp or wet
environment. Do not expose charger to
rain or snow. If battery case is cracked or
otherwise damaged, do not insert into
charger.
¾ Battery short or fire may result.
Charge only TRUMPF approved rechar-
geable batteries.
¾ See Description and Specifications.
¾ Other types of batteries may burst
causing personal injury and damage.
Charge battery pack in temperatures
above +32 degrees F (0 degrees C) and
below +113 degrees F (45 degrees C).
Store tool and battery pack in locations
where temperatures will not exceed 120
degrees F (49 degrees C).
¾ This is important to prevent serious
damage to the battery cells.
Battery leakage may occur under extreme
usage or temperature conditions. Avoid
contact with skin and eyes.
¾ The battery liquid is caustic and could
cause chemicalburns to tissues.
¾ If liquid comes in contact with skin, wash
quickly with soap and water.
¾ If the liquid contacts your eyes, flush
them with water for a minimum of 10
minutes and seek medical attention.
NOTIC
E
NOTIC
E
NOTIC
E
NOTIC
E
E649en_03
Safety TruTool S 130 (1A5)
Charger CLi 10.8 V
E649en_03
Place charger on flat non-flammable
surfaces and away from flammable
materials when re-charging battery pack.
¾ The charger and battery pack heat during
charging. Carpeting and other heat
insulating surfaces block proper air
circulation which may cause overheating
of the charger and battery pack.
¾ If smoke or melting of the case are
observed unplug the charger immediately
and do not use the battery pack or
charger.
Use of an attachment not recommended or
sold by TRUMPF may result in a risk of
fire, electric shock or injury to persons.
NOTIC
E
NOTIC
E
8
TruTool S 130 (1A5)
Charger CLi 10.8 V
Safety
9
1.4 Lithium-ion Battery Disposal
Do not attempt to disassemble the battery
or remove any component projecting from
the battery terminals.
¾ Fire or injury may result.
¾ Prior to disposal, protect exposed
terminals with heavy insulating tape to
prevent shorting.
WARNIN
G
Note
If equipped with a lithium-ion battery, the battery must be collected,
recycled or disposed of in an environmentally sound manner.
Note for USA
If equipped with a lithium-ion battery, the battery must be collected,
recycled or disposed of in an environmentally sound manner.
“The EPA certified RBRC Battery Recycling Seal on the lithium-ion (Li-ion)
battery indicates TRUMPF Inc. is voluntarily participating in an industry
program to collect and recycle these batteries at the end of their useful
life, when taken out of service in the United States or Canada.
The RBRC program provides a convenient alterative to placing used Li-ion
batteries into the trash or the municipal waste stream, which may be illegal
in your area.
Please call 1-800-8-BATTERY for information on Li-ion battery recycling
and disposal bans/restrictions in your area, or return your batteries to a
TRUMPF Inc. Service Center for recycling. TRUMPF Inc.'s involvement in
this program is part of our commitment to preserving our environment and
conserving our natural resources.
E649en_03
Description TruTool S 130 (1A5)
Charger CLi 10.8 V
2. Description
1 On/Off switch
2 Fixing screw for the upper blade
3 Ram
4 Upper blade and lower blade
5 Fixing screw for the lower blade
6 Chip deflector
7 Fixed blade carrier
8 Rechargeable battery
9 Charger CLi
TruTool S 130 shears with charger Fig. 54906
10 E649en_03
TruTool S 130 (1A5)
Charger CLi 10.8 V
Description
11
2.1 Intended use
Can cause injury or damage to health.
¾ Only use the machine for work and
materials as described under "Intended
use."
¾ Do not machine materials containing
asbestos.
WARNIN
G
The TRUMPF TruTool S 130 shears are a handheld electric tool intended
for the following applications:
x Slitting of plate-shaped workpieces made of steel, aluminum, non-
ferrous heavy metal and plastic.
x Separating straight or curved exterior and inner cutouts.
x Cutting along scribed lines.
The CLi charger charges exchangeable batteries of the Li-Ion Energy 10.8
V system.
E649en_03
Description TruTool S 130 (1A5)
Charger CLi 10.8 V
E649en_03
2.2 Noise and vibration information
Vibration emission value may be
exceeded.
¾ Select tools correctly and replace them
promptly when they show wear.
¾ Have maintenance and repair work
performed by trained specialist
technicians.
¾ Establish additional safety precautions for
the protection of the operator against the
effects of vibrations (e.g. keeping hands
warm and organizing the work
sequences).
Noise emission value may be exceeded.
¾ Wear hearing protection.
WARNIN
G
WARNIN
G
Notes
x The specified vibration emission value was measured in accordance
with a standardized testing procedure and can be used to compare
one electric tool with another.
x The specified vibration emission value can also be applied for a
provisional estimate of the vibration load.
x Times during which the device is switched off or running but not
actually in use can considerably reduce the vibration load during the
entire working period.
12
TruTool S 130 (1A5)
Charger CLi 10.8 V
Description
Designation of measured value Unit Value in accordance
with EN 60745
Vibration emission value ah (vector
sum of three directions)
m/s2 3.5
Uncertainty K for vibration emission
value
m/s2 1.5
A-class acoustic pressure level LPA
typically
dB (A) < 70
Uncertainty K for noise emission
value
DB 3
Tab. 3
E649en_03 13
Description TruTool S 130 (1A5)
Charger CLi 10.8 V
2.3 Technical data TruTool S 130
Other
countries
USA
Values Values
Voltage 10.8 V 10.8 V
Max. thickness of the material
Steel 400 N/mm²
Steel 600 N/mm²
Steel 800 N/mm²
Aluminum 250 N/mm²
1.3 mm
0.8 mm
0.6 mm
2.0 mm
0.051 in/ 18 Gauge
0.031 in/ 22 Gauge
0.024 in/ 24 Gauge
0.078 in/ 14 Gauge
Working speed 4-7 m/min 13-33 ft/min
Idle stroke rate 3700 1/min 3700 1/min
Weight with rechargeable battery 1.4 kg 3.2 lbs
Weight without rechargeable
battery
1.2 kg 2.8 lbs
Smallest radius for curved cuts 16 mm 0.63 in
Table 2
14 E649en_03
TruTool S 130 (1A5)
Charger CLi 10.8 V
Setting work
15
3. Setting work
3.1 Setting the cutting clearance
The blade clearance "a" is factory-set to a material thickness of 0.8 mm
when the machine is first delivered.
3.2 Loading the rechargeable battery
Risk of fatal injury from electric shock.
Line voltage is present at the battery
terminals.
¾ Do not touch the electrical contacts
(battery terminals) on the charger.
WARNIN
G
E649en_03
Setting work TruTool S 130 (1A5)
Charger CLi 10.8 V
Checking loading status
Check the loading status of the rechargeable battery Fig. 54902
¾ Press the button on the TruTool S 130
The LEDs on the TruTool S 130 show the battery charge status.
LED battery charge status
3x green continuous full
2x green continuous 2/3
1x green continuous 1/3
1x green, blinking Reserve
Tab. 3
16 E649en_03
TruTool S 130 (1A5)
Charger CLi 10.8 V
Setting work
Loading the rechargeable battery
The rechargeable battery is supplied partially charged. In order to guaran-
tee full power from the rechargeable battery, it must be fully charged in the
charger before use.
The rechargeable battery can be charged at any time without shortening
its lifespan.
Note
The full capacity is reached after 2-10 charging cycles.
Fig. 54903
¾ Insert the exchangeable battery into the insertion well on the charger.
E649en_03 17
Setting work TruTool S 130 (1A5)
Charger CLi 10.8 V
Note
Interrupting the charging process does not damage the rechargeable
battery.
The rechargeable battery is fitted with a NTC temperature monitoring
device. If a rechargeable battery is inserted into the charger that is too
cold or too warm (red LED flashes), then the charging process will begin
automatically as soon as the rechargeable battery has reached the correct
charging temperature (–0°C to 45°C).
Status display on the charger
Charger CLi Fig. 54904
Display Function
Red continuous Rechargeable battery too warm/cold
Green continuous Rechargeable battery is full
Red, flashing No rechargeable battery
Green, blinking Rechargeable battery charging
Table 4
18 E649en_03
TruTool S 130 (1A5)
Charger CLi 10.8 V
Setting work
19
3.3 Changing the rechargeable battery
Risk of injury from the rechargeable battery.
¾ Check the machine and the rechargeable
battery for damage before each use.
WARNIN
G
Removing the exchangeable battery
¾ Press the locking mechanism together and pull the exchangeable
battery out backwards.
Inserting the exchangeable battery
¾ Slide the exchangeable battery into the machine holder from the back
until the battery locks into place.
Fig. 54905
E649en_03
Operation TruTool S 130 (1A5)
Charger CLi 10.8 V
E649en_03
4. Operation
Risk of injury from the rechargeable battery.
¾ Always remove the rechargeable battery
from the machine prior to maintenance
work.
¾ Check the machine and the rechargeable
battery for damage before each use.
¾ Keep the machine dry and do not operate
it in damp rooms.
Risk of injury due to improper handling.
¾ Make sure the machine is always in a
stable position when operating it.
¾ Wear safety glasses, hearing protection,
protective gloves and work shoes when
working at the machine.
¾ Never touch the tool while the machine is
running.
¾ Always operate the machine away from
your body.
WARNIN
G
WARNIN
G
Damage to the battery.
¾ If the machine shuts down automatically,
do not press the On/Off switch again.
Damage to property caused by blunt tools.
Machine overload.
¾ Check the cutting edge of the blade hourly
for wear. Sharp blades ensure good cutting
quality and protect the machine.
¾ Replace the blades in due time.
NOTIC
E
NOTIC
E
20
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Trumpf TruTool S 250 (1A5) User manual
-
-
-
-
-
-
-
-
-
Other documents
-
Snapper 1696771 User manual
-
Eaton SPS-24V-2A5/BNS Installation guide
-
Gardena Accu 80 Operating Instructions Manual
-
-
-
Black & Decker GKC108 User manual
-
DeWalt DCP580 Original Instructions Manual
-
Gardenline GDGS12G User manual
-
DeWalt DCH254 User manual
-
Hitachi CG 10DL Technical Data And Service Manual