Trumpf TruTool S 130 (1A5) User manual

Operator's manual

TruTool S 130 (1A5)

Charger CLi 10.8

V

english

Contents TruTool S 130 (1A5)

Charger CLi 10.8 V

Contents

1. Safety............................................................................................. 3

1.1 General safety information ............................................................. 3

1.2 Specific safety for shears ............................................................... 5

1.3 Specific safety for Battery/ Charger................................................ 6

1.4 Lithium-ion Battery Disposal........................................................... 9

2. Description.................................................................................. 10

2.1 Intended use................................................................................. 11

2.2 Noise and vibration information.................................................... 12

2.3 Technical data TruTool S 130 ...................................................... 14

3. Setting work ................................................................................ 15

3.1 Setting the cutting clearance ........................................................ 15

3.2 Loading the rechargeable battery................................................. 15

3.3 Changing the rechargeable battery.............................................. 19

4. Operation..................................................................................... 20

5. Maintenance................................................................................ 22

5.1 Changing the tool ......................................................................... 24

6. Original accessories and wearing parts .................................. 26

Declaration of conformity

Warranty

Replacement parts list

2 E649en_03

TruTool S 130 (1A5)

Charger CLi 10.8 V

Safety

3

1. Safety

1.1 General safety information

x Read the operator's manual and safety information in

their entirety before starting up the machine. Closely

follow the instructions given.

x Adhere to the safety regulations in accordance with DIN

VDE, CEE, AFNOR and to the specific regulations of the

country of operation.

Tab. 1

Read all safety warnings (order no.

0125699) and all instructions!

¾ Failure to follow the warnings and

instructions may result in electric shock,

fire and/or serious injury.

¾ Save all warnings and instructions for

future reference.

WARNIN

G

Risk of fatal injury from electric shock

¾ Do not touch the electrical contacts on

the charger or on the rechargeable

battery.

WARNIN

G

E649en_03

Safety TruTool S 130 (1A5)

Charger CLi 10.8 V

E649en_03

Risk of injury from the rechargeable battery.

¾ Always remove the rechargeable battery

from the machine prior to maintenance

work.

¾ Check the machine and the rechargeable

battery for damage before each use.

¾ Keep the machine dry and do not operate

it in damp rooms.

¾ Charge the exchangeable battery of the

Li-Ion Energy 10.8 V system only with the

charger of the Li-Ion Energy 10.8 V

system.

¾ Do not attempt to open the exchangeable

batteries or the charger.

¾ Do not dispose of the exchangeable bat-

teries in fires or household waste.

Risk of injury due to improper handling.

¾ Wear safety glasses, hearing protection,

protective gloves and work shoes when

working at the machine.

¾ Have servicing and inspections of hand-

held electric tools carried out by a

qualified specialist. Only use original

accessories provided by TRUMPF.

WARNIN

G

WARNIN

G

4

TruTool S 130 (1A5)

Charger CLi 10.8 V

Safety

5

1.2 Specific safety for shears

Risk of injury due to improper handling.

¾ Make sure the machine is always in a

stable position when operating it.

¾ Never touch the tool while the machine is

running.

¾ Always operate the machine away from

your body.

Health risk from dust.

Some materials produce harmful dust

during cutting.

¾ Make sure the work station is sufficiently

ventilated.

¾ When working with the machine, wear

safety glasses, dust masks and protec-

tive gloves.

Risk of injury to hands.

¾ Do not reach into the processing line with

your hands.

¾ Use both hands to hold the machine.

Risk of possible injury from flying chips.

¾ Only work with the chip deflector 6

mounted. Take care that the chip

deflector is not damaged or bent.

WARNIN

G

WARNIN

G

WARNIN

G

WARNIN

G

E649en_03

Safety TruTool S 130 (1A5)

Charger CLi 10.8 V

E649en_03

1.3 Specific safety for Battery/ Charger

¾ Before using battery charger, read all instructions and cautionary

markings on battery charger, battery pack, and product using battery.

Risk of injury from the battery or charger.

When batteries are not in tool or charger,

keep them away from metal objects.

¾ For example, to protect terminals from

shorting do not place batteries in a tool

box or pocket with nails, screws, keys,

etc. Fire or injury may result.

¾ Do not put batteries into fire or expose to

high heat. They may explode.

Use only the charger which accompanied

your product or direct replacement

aslisted in the catalog or this manual.

¾ Do not substitute any other charger. Use

only TRUMPF approved chargers with

your product.

¾ See Description and Specifications.

WARNIN

G

NOTIC

E

Do not disassemble charger or operate the

charger if it has received a sharp blow,

been dropped or otherwise damaged in

anyway. Replace damaged cord or plugs

immediately.

¾ Incorrect reassembly or damage may

result in electric shock or fire.

NOTIC

E

6

TruTool S 130 (1A5)

Charger CLi 10.8 V

Safety

7

Do not recharge battery in damp or wet

environment. Do not expose charger to

rain or snow. If battery case is cracked or

otherwise damaged, do not insert into

charger.

¾ Battery short or fire may result.

Charge only TRUMPF approved rechar-

geable batteries.

¾ See Description and Specifications.

¾ Other types of batteries may burst

causing personal injury and damage.

Charge battery pack in temperatures

above +32 degrees F (0 degrees C) and

below +113 degrees F (45 degrees C).

Store tool and battery pack in locations

where temperatures will not exceed 120

degrees F (49 degrees C).

¾ This is important to prevent serious

damage to the battery cells.

Battery leakage may occur under extreme

usage or temperature conditions. Avoid

contact with skin and eyes.

¾ The battery liquid is caustic and could

cause chemicalburns to tissues.

¾ If liquid comes in contact with skin, wash

quickly with soap and water.

¾ If the liquid contacts your eyes, flush

them with water for a minimum of 10

minutes and seek medical attention.

NOTIC

E

NOTIC

E

NOTIC

E

NOTIC

E

E649en_03

Safety TruTool S 130 (1A5)

Charger CLi 10.8 V

E649en_03

Place charger on flat non-flammable

surfaces and away from flammable

materials when re-charging battery pack.

¾ The charger and battery pack heat during

charging. Carpeting and other heat

insulating surfaces block proper air

circulation which may cause overheating

of the charger and battery pack.

¾ If smoke or melting of the case are

observed unplug the charger immediately

and do not use the battery pack or

charger.

Use of an attachment not recommended or

sold by TRUMPF may result in a risk of

fire, electric shock or injury to persons.

NOTIC

E

NOTIC

E

8

TruTool S 130 (1A5)

Charger CLi 10.8 V

Safety

9

1.4 Lithium-ion Battery Disposal

Do not attempt to disassemble the battery

or remove any component projecting from

the battery terminals.

¾ Fire or injury may result.

¾ Prior to disposal, protect exposed

terminals with heavy insulating tape to

prevent shorting.

WARNIN

G

Note

If equipped with a lithium-ion battery, the battery must be collected,

recycled or disposed of in an environmentally sound manner.

Note for USA

If equipped with a lithium-ion battery, the battery must be collected,

recycled or disposed of in an environmentally sound manner.

“The EPA certified RBRC Battery Recycling Seal on the lithium-ion (Li-ion)

battery indicates TRUMPF Inc. is voluntarily participating in an industry

program to collect and recycle these batteries at the end of their useful

life, when taken out of service in the United States or Canada.

The RBRC program provides a convenient alterative to placing used Li-ion

batteries into the trash or the municipal waste stream, which may be illegal

in your area.

Please call 1-800-8-BATTERY for information on Li-ion battery recycling

and disposal bans/restrictions in your area, or return your batteries to a

TRUMPF Inc. Service Center for recycling. TRUMPF Inc.'s involvement in

this program is part of our commitment to preserving our environment and

conserving our natural resources.

E649en_03

Description TruTool S 130 (1A5)

Charger CLi 10.8 V

2. Description

1 On/Off switch

2 Fixing screw for the upper blade

3 Ram

4 Upper blade and lower blade

5 Fixing screw for the lower blade

6 Chip deflector

7 Fixed blade carrier

8 Rechargeable battery

9 Charger CLi

TruTool S 130 shears with charger Fig. 54906

10 E649en_03

TruTool S 130 (1A5)

Charger CLi 10.8 V

Description

11

2.1 Intended use

Can cause injury or damage to health.

¾ Only use the machine for work and

materials as described under "Intended

use."

¾ Do not machine materials containing

asbestos.

WARNIN

G

The TRUMPF TruTool S 130 shears are a handheld electric tool intended

for the following applications:

x Slitting of plate-shaped workpieces made of steel, aluminum, non-

ferrous heavy metal and plastic.

x Separating straight or curved exterior and inner cutouts.

x Cutting along scribed lines.

The CLi charger charges exchangeable batteries of the Li-Ion Energy 10.8

V system.

E649en_03

Description TruTool S 130 (1A5)

Charger CLi 10.8 V

E649en_03

2.2 Noise and vibration information

Vibration emission value may be

exceeded.

¾ Select tools correctly and replace them

promptly when they show wear.

¾ Have maintenance and repair work

performed by trained specialist

technicians.

¾ Establish additional safety precautions for

the protection of the operator against the

effects of vibrations (e.g. keeping hands

warm and organizing the work

sequences).

Noise emission value may be exceeded.

¾ Wear hearing protection.

WARNIN

G

WARNIN

G

Notes

x The specified vibration emission value was measured in accordance

with a standardized testing procedure and can be used to compare

one electric tool with another.

x The specified vibration emission value can also be applied for a

provisional estimate of the vibration load.

x Times during which the device is switched off or running but not

actually in use can considerably reduce the vibration load during the

entire working period.

12

TruTool S 130 (1A5)

Charger CLi 10.8 V

Description

Designation of measured value Unit Value in accordance

with EN 60745

Vibration emission value ah (vector

sum of three directions)

m/s2 3.5

Uncertainty K for vibration emission

value

m/s2 1.5

A-class acoustic pressure level LPA

typically

dB (A) < 70

Uncertainty K for noise emission

value

DB 3

Tab. 3

E649en_03 13

Description TruTool S 130 (1A5)

Charger CLi 10.8 V

2.3 Technical data TruTool S 130

Other

countries

USA

Values Values

Voltage 10.8 V 10.8 V

Max. thickness of the material

Steel 400 N/mm²

Steel 600 N/mm²

Steel 800 N/mm²

Aluminum 250 N/mm²

1.3 mm

0.8 mm

0.6 mm

2.0 mm

0.051 in/ 18 Gauge

0.031 in/ 22 Gauge

0.024 in/ 24 Gauge

0.078 in/ 14 Gauge

Working speed 4-7 m/min 13-33 ft/min

Idle stroke rate 3700 1/min 3700 1/min

Weight with rechargeable battery 1.4 kg 3.2 lbs

Weight without rechargeable

battery

1.2 kg 2.8 lbs

Smallest radius for curved cuts 16 mm 0.63 in

Table 2

14 E649en_03

TruTool S 130 (1A5)

Charger CLi 10.8 V

Setting work

15

3. Setting work

3.1 Setting the cutting clearance

The blade clearance "a" is factory-set to a material thickness of 0.8 mm

when the machine is first delivered.

3.2 Loading the rechargeable battery

Risk of fatal injury from electric shock.

Line voltage is present at the battery

terminals.

¾ Do not touch the electrical contacts

(battery terminals) on the charger.

WARNIN

G

E649en_03

Setting work TruTool S 130 (1A5)

Charger CLi 10.8 V

Checking loading status

Check the loading status of the rechargeable battery Fig. 54902

¾ Press the button on the TruTool S 130

The LEDs on the TruTool S 130 show the battery charge status.

LED battery charge status

3x green continuous full

2x green continuous 2/3

1x green continuous 1/3

1x green, blinking Reserve

Tab. 3

16 E649en_03

TruTool S 130 (1A5)

Charger CLi 10.8 V

Setting work

Loading the rechargeable battery

The rechargeable battery is supplied partially charged. In order to guaran-

tee full power from the rechargeable battery, it must be fully charged in the

charger before use.

The rechargeable battery can be charged at any time without shortening

its lifespan.

Note

The full capacity is reached after 2-10 charging cycles.

Fig. 54903

¾ Insert the exchangeable battery into the insertion well on the charger.

E649en_03 17

Setting work TruTool S 130 (1A5)

Charger CLi 10.8 V

Note

Interrupting the charging process does not damage the rechargeable

battery.

The rechargeable battery is fitted with a NTC temperature monitoring

device. If a rechargeable battery is inserted into the charger that is too

cold or too warm (red LED flashes), then the charging process will begin

automatically as soon as the rechargeable battery has reached the correct

charging temperature (–0°C to 45°C).

Status display on the charger

Charger CLi Fig. 54904

Display Function

Red continuous Rechargeable battery too warm/cold

Green continuous Rechargeable battery is full

Red, flashing No rechargeable battery

Green, blinking Rechargeable battery charging

Table 4

18 E649en_03

TruTool S 130 (1A5)

Charger CLi 10.8 V

Setting work

19

3.3 Changing the rechargeable battery

Risk of injury from the rechargeable battery.

¾ Check the machine and the rechargeable

battery for damage before each use.

WARNIN

G

Removing the exchangeable battery

¾ Press the locking mechanism together and pull the exchangeable

battery out backwards.

Inserting the exchangeable battery

¾ Slide the exchangeable battery into the machine holder from the back

until the battery locks into place.

Fig. 54905

E649en_03

Operation TruTool S 130 (1A5)

Charger CLi 10.8 V

E649en_03

4. Operation

Risk of injury from the rechargeable battery.

¾ Always remove the rechargeable battery

from the machine prior to maintenance

work.

¾ Check the machine and the rechargeable

battery for damage before each use.

¾ Keep the machine dry and do not operate

it in damp rooms.

Risk of injury due to improper handling.

¾ Make sure the machine is always in a

stable position when operating it.

¾ Wear safety glasses, hearing protection,

protective gloves and work shoes when

working at the machine.

¾ Never touch the tool while the machine is

running.

¾ Always operate the machine away from

your body.

WARNIN

G

WARNIN

G

Damage to the battery.

¾ If the machine shuts down automatically,

do not press the On/Off switch again.

Damage to property caused by blunt tools.

Machine overload.

¾ Check the cutting edge of the blade hourly

for wear. Sharp blades ensure good cutting

quality and protect the machine.

¾ Replace the blades in due time.

NOTIC

E

NOTIC

E

20

Page is loading ...

Trumpf TruTool S 130 (1A5) User manual

Trumpf TruTool S 130 (1A5) User manual

Related papers

Other documents