VTech DS6111-2 DS6111-3 User manual

User’s manual

www.vtechphones.com

Models:

DS6111-2/

DS6111-3/

DS6111-4

Congratulations

on purchasing your new VTech product.

Before using this telephone, please read the

Important safety instructions

on page 40 of this manual.

This manual has all the feature operations and troubleshooting necessary

to install and operate your new VTech telephone. Please review this manual

thoroughly to ensure proper installation and operation of this innovative and

feature rich VTech product. For support, shopping, and everything new at

VTech, visit our website at www.vtechphones.com.

In Canada, please visit www.vtechcanada.com.

www.vtechphones.com

Table of contents

i

Getting started . . . . . . . . . . . . . . . . 1

Parts checklist . . . . . . . . . . . . . . . . . 1

Telephone base and charger installation . . . . 2

Battery installation and charging . . . . . . . . 3

Mounting bracket installation . . . . . . . . . . 4

Handset layout . . . . . . . . . . . . . . . . . 6

Telephone base layout . . . . . . . . . . . . . 7

Telephone settings . . . . . . . . . . . . . . 8

Ringer volume (handset) . . . . . . . . . . . . 8

Ringer tone . . . . . . . . . . . . . . . . . . . 9

Key tone . . . . . . . . . . . . . . . . . . . 10

Language . . . . . . . . . . . . . . . . . . . 10

Clear voice mail. . . . . . . . . . . . . . . . 11

Telephone operation . . . . . . . . . . . . 12

Make a call . . . . . . . . . . . . . . . . . . 12

Answer a call . . . . . . . . . . . . . . . . . 12

End a call . . . . . . . . . . . . . . . . . . . 12

Speakerphone . . . . . . . . . . . . . . . . 12

Volume . . . . . . . . . . . . . . . . . . . . 12

Mute. . . . . . . . . . . . . . . . . . . . . . 13

Ringer mute. . . . . . . . . . . . . . . . . . 13

Call waiting . . . . . . . . . . . . . . . . . . 13

Chain dialing . . . . . . . . . . . . . . . . . 14

Find handset . . . . . . . . . . . . . . . . . 14

Intercom . . . . . . . . . . . . . . . . . . . 15

Conference call . . . . . . . . . . . . . . . . 16

Transfer an external call . . . . . . . . . . . 17

Switch between external and intercom calls . 19

Answer an incoming call during an intercom call . 20

Directory . . . . . . . . . . . . . . . . . . . 21

Store a directory entry . . . . . . . . . . . . 22

Character chart . . . . . . . . . . . . . . . . 23

Search the directory . . . . . . . . . . . . . 24

Dial a directory entry . . . . . . . . . . . . . 24

Edit a directory entry . . . . . . . . . . . . . 25

Delete from the directory . . . . . . . . . . . 26

About caller ID . . . . . . . . . . . . . . . . 27

Call log . . . . . . . . . . . . . . . . . . . . 28

www.vtechphones.com ii

Table of contents

Missed calls indicator. . . . . . . . . . . . . 29

Review the call log . . . . . . . . . . . . . . 29

Make a call log entry ready to dial . . . . . . 30

Dial a call log entry . . . . . . . . . . . . . . 30

Save a call log entry to the directory . . . . . 31

Delete from the call log . . . . . . . . . . . . 32

Call log display screen messages . . . . . . 33

Redial list . . . . . . . . . . . . . . . . . . . 34

Dial a redial entry . . . . . . . . . . . . . . . 34

Delete from redial . . . . . . . . . . . . . . . 34

Appendix. . . . . . . . . . . . . . . . . . . 35

Handset display screen messages . . . . . . 35

Handset and telephone base indicators . . . 37

Battery . . . . . . . . . . . . . . . . . . . . 39

Important safety instructions . . . . . . . . . 40

Troubleshooting. . . . . . . . . . . . . . . . 41

Operating range . . . . . . . . . . . . . . . 49

Maintenance . . . . . . . . . . . . . . . . . 49

About cordless telephones . . . . . . . . . . 50

The RBRC® seal . . . . . . . . . . . . . . . 50

Warranty . . . . . . . . . . . . . . . . . . . 51

FCC, ACTA and IC regulations . . . . . . . . 53

Technical specications . . . . . . . . . . . 55

Index . . . . . . . . . . . . . . . . . . . . . 56

www.vtechphones.com 1

Getting started Basic operation

To purchase

replacement

batteries or power

adapters, visit our

website at www.

vtechphones.

com or call

1 (800) 595-9511.

In Canada, go to

www.vtechcanada.

com or call

1 (800) 267-7377.

•

8. User’s manualTelephone base with

mounting bracket

6.

5. Telephone base

power adapter

4. Telephone

line cord

Getting started

Parts checklist

Your telephone contains the following items. Save your sales receipt and original

packaging in the event warranty service is necessary.

1. Handsets

(2 for DS6111-2,

3 for DS6111-3,

4 for DS6111-4)

2. Battery

compartment

covers

(2 for DS6111-2,

3 for DS6111-3,

4 for DS6111-4)

3. Batteries

(2 for DS6111-2,

3 for DS6111-3,

4 for DS6111-4)

7. Chargers and charger adapters

(1 for DS6111-2,

2 for DS6111-3,

3 for DS6111-4)

www.vtechphones.com

2

Getting started

Use only the

power adapters

supplied with this

product. To order

a replacement,

visit our website at

www.vtechphones.

com or call

1 (800) 595-9511.

In Canada, go to

www.vtechcanada.

com or call

1 (800) 267-7377.

The telephone

base power

adapter and the

charger adapter(s)

are intended to be

correctly oriented

in a vertical

or oor mount

position. The

prongs are not

designed to hold

the plug in place

if it is plugged into

a ceiling or an

under-the-table/

cabinet outlet.

•

Telephone base

Telephone line cord

Electrical outlet

not controlled by

a wall switch

Telephone base

power adapter

Telephone

wall jack

Charger

adapter

Telephone base and charger installation

Install the telephone base and charger as shown below. Make sure that the electrical

outlet is not controlled by a wall switch. If you subscribe to Digital Subscriber Line

(DSL) high-speed Internet service through your telephone line, you must have

a DSL lter between the telephone base and the telephone wall jack. The lter

prevents noise and caller ID problems caused by DSL interference. Please contact

your DSL service provider for more information about DSL lters.

DSL lter (not included)

required if you have

DSL high-speed

Internet service

www.vtechphones.com 3

Getting started Basic operation

Getting started

If the handset

will not be used

for a long time,

disconnect and

remove the battery

to prevent possible

leakage.

To purchase

replacement

batteries, visit our

website at www.

vtechphones.

com or call

1 (800) 595-9511.

In Canada, go to

www.vtechcanada.

com or call

1 (800) 267-7377.

•

Battery installation and charging

Install the battery as shown below. The battery may have enough charge for short

calls. For best performance, charge the handset for at least 16 hours. When the

battery power is low, the handset will beep, display LOW BATTERY and will

ash on the handset screen. Place the handset in the telephone base or charger

to charge the battery when not in use. When fully charged, the handset battery

provides approximately nine hours of talk time or ve days of standby time.

Insert the plug of the battery as indicated. Make sure it is plugged securely

and matches the color-coded label inside the battery compartment.

Place the battery with the label THIS SIDE UP facing up and the wires inside

the battery compartment.

Align the cover at against the battery compartment, then slide it upwards

until it clicks into place.

Charge the handset by placing it in the telephone base or the charger. The

handset charge light will be on when charging.

1.

2.

3.

4.

1234

Charge light

www.vtechphones.com

4

Getting started

Mounting bracket installation

Your telephone base comes with the mounting bracket installed for desktop use. If

you prefer to mount your telephone on the wall (optional), it is designed to mount

on a standard telephone wall plate.

Wall mounting bracket installation:

Slide the bracket down and away from the telephone base.

Tilt the top of the bracket down so that it rests on the base. Align the grooves

on the bracket with the tabs on the base. See image 2 below.

Slide the bracket down until it clicks into place. See image 3 below.

Align the holes on the telephone base with the standard wall plate and slide

down until the telephone is secure.

1.

2.

3.

4.

123

Tabs

4

www.vtechphones.com 5

Getting started Basic operation

Getting started

Mounting bracket installation (continued)

Desktop/tabletop bracket installation:

Your telephone comes ready for desktop use. If you have repositioned the bracket for

wall mounting and now want to return to desktop use, follow the following steps:

Remove the bracket from wall mount orientation by sliding it up towards the

top of the base.

Tilt the top of the bracket up so that the lower portion of the bracket rests on

the base. See image 2.

Slide the bracket up, onto the tabs towards the center of the telephone base

until it clicks into place.

1.

2.

3.

123

Tabs

www.vtechphones.com

6

Handset layout

Getting started

/CID

• When the handset is not in use, press to

review the call log.

While in the menu, press to scroll down.•

/FLASH

• Press to make or answer a call.

• During a call, press to receive an incoming

call when you receive a call waiting alert.

/ (Directory)

• Press to enter the directory when the handset

is not in use.

While in the menu, press to scroll up.•

MENU/SELECT

• Press to display the menu.

• When in the menu, press to select an item,

or save an entry or setting.

OFF/CLEAR

• During a call, press to hang up.

• While the handset is ringing, press to silence

the ringer.

• Press and hold when the handset is not in use

to erase the MISSED CALLS display.

• During programming, press to exit without

making changes.

REDIAL/PAUSE

• Press to review the redial list.

• While dialing or entering numbers into the directory,

press and hold to insert a dialing pause.

CHARGE light

• On when the handset is charging in the

telephone base or charger.

#

• Press repeatedly to display other dialing options

when reviewing a call log entry (page 30).

INT (intercom)

• Press to initiate an intercom conversation

or transfer a call.

/ SPEAKER

Press to activate the handset speakerphone.

Press again to resume normal handset use.

•

MUTE/REMOVE

• While on a call, press to mute microphone.

• While reviewing the call log, press to delete an

individual entry, or press and hold to delete the

entire call log.

•

Press to delete digits when predialing (preview

numbers before dialing).

www.vtechphones.com 7

Getting started Basic operation

Getting started

Telephone base layout

FIND HANDSET

Press to pag e the system

handsets.

•

IN USE light

Flash es when there is an

in c om i n g c a l l o r a n o t h er

telephone sharing the same

line is in use .

On when a system handset is

in use.

•

VOICEMAIL light

Fl a sh e s w h e n y o u h av e n e w

voicemail. Voicemail is offered by

your telephone service provider.

•

www.vtechphones.com

8

Ringer volume (handset)

You can change the ringer volume to a comfortable level. The

ringer can also be turned off so the telephone does not ring

when there are incoming calls.

To adjust the ringer volume:

Press VOL or VOL to select the desired ringer volume

when the handset is not in use.

When you stop pressing the volume buttons, the setting

will be saved.

-OR-

Press MENU/SELECT to display the menu when the

handset is not in use.

Press or to select >RINGER VOLUME, then press

MENU/SELECT.

Press or to adjust the volume. A sample of each ringer

volume will be played when scrolling through the choices.

Press MENU/SELECT to conrm your selection. You will

hear a conrmation tone.

1.

2.

1.

2.

3.

4.

RINGER VOLUME

>RINGER VOLUME

RINGER TONE

The ringer will be

off if the volume

is set to zero,

and a ringer off

icon will be

displayed.

•

Telephone settings

www.vtechphones.com 9

Basic operation

Telephone settings

RINGER TONE

1

>RINGER TONE

KEY TONE

Ringer tone

This menu allows you to choose from different ringer tones.

To choose a ringer tone:

Press MENU/SELECT to display the menu when the

handset is not in use.

Press or to select >RINGER TONE, then press

MENU/SELECT.

Press or to select the desired ringer tone. A sample

of each ringer tone will be played when scrolling through

the choices.

Press MENU/SELECT to conrm your selection. You will

hear a conrmation tone.

1.

2.

3.

4.

If the ringer is

turned off while

scrolling through

the options in the

RINGER TONE

menu, the sample

of the ringer will

not be heard.

•

www.vtechphones.com

10

Telephone settings

>KEY TONE

LANGUAGE

Key tone

The handset will beep when you press any handset key. You

may turn the key tone on or off. To change the setting:

Press MENU/SELECT to display the menu when the

handset is not in use.

Press or to select >KEY TONE, then press

MENU/SELECT.

Press or to choose ON or OFF.

Press MENU/SELECT to conrm your selection. You will

hear a conrmation tone.

Language

You can select ENGLISH, FRANÇAIS or ESPAÑOL to be

used in all screen displays. To change the setting:

Press MENU/SELECT to display the menu when the

handset is not in use.

Press or to select >LANGUAGE, then press

MENU/SELECT.

Press or to scroll through the choices.

Press MENU/SELECT to conrm your selection. You will

hear a conrmation tone.

1.

2.

3.

4.

1.

2.

3.

4.

KEY TONE

ON

LANGUAGE

ENGLISH

>LANGUAGE

CLR VOICE MAIL

www.vtechphones.com 11

Basic operation

Telephone settings

The telephone

service provider

may alert you to

new messages

with a stutter

(broken) dial tone.

Contact your

service provider

for details.

•

>CLR VOICE MAIL

DIRECTORY

TURN INDICATOR

OFF?

Clear voice mail

If you subscribe to voicemail service offered by your telephone service provider,

NEW VOICE MAIL and will appear on the handset, and the VOICEMAIL light

on the telephone base will ash when you have new voicemail messages. Please

contact your local telephone company for more information and assistance about

using your voicemail service.

After you have listened to all new voicemail messages, the indicators on both the

handset and telephone base will be turned off automatically.

Use the clear voicemail feature when the telephone indicates that there is new

voicemail but there is none (for example, when you have accessed your voicemail

from a different telephone line while away from home). Clearing the voicemail

waiting indicator only turns off the indicators; it does not delete your voicemail

message(s). If there actually are new voicemail messages, your local telephone

company will continue to send the signal which will turn the indicators back on.

To manually turn off these indicators:

Press MENU/SELECT to display the menu when the

handset is not in use.

Press or to select >CLR VOICE MAIL, then press

MENU/SELECT. The screen displays TURN INDICATOR

OFF?

Press MENU/SELECT to conrm your selection. You will

hear a conrmation tone.

1.

2.

3.

www.vtechphones.com

12

Make a call

Press /FLASH or /SPEAKER.

Dial the number.

-OR-

Dial the number.

Press /FLASH or /SPEAKER.

Answer a call

Press /FLASH, /SPEAKER or any of the dialing key (0-9, #, *).

End a call

Press OFF/CLEAR or put the handset in the telephone base or charger.

Speakerphone

During a call, press /SPEAKER to switch between

speakerphone and normal handset use.

Volume

During a call, use the volume button on the right side of the

handset to adjust the listening volume.

Press VOL or VOL to adjust the listening volume to a

comfortable level.

1.

2.

1.

2.

•

The screen

displays the

elapsed time as

you talk (in hours,

minutes and

seconds).

When predialing

(preview numbers

before dialing),

press

MUTE/REMOVE

or OFF/CLEAR

to backspace and

delete;

press and hold

REDIAL/PAUSE

to insert a dialing

pause.

•

Telephone operation

www.vtechphones.com 13

Basic operation

Telephone operation

PHONE 0:00:00

MUTED

MUTE

Mute

The mute function allows you to hear the other party while

the other party cannot hear you.

During a call, press MUTE/REMOVE on the handset.

MUTED will be temporarily displayed on the screen, along

with the smaller MUTE icon.

Press MUTE/REMOVE again to resume the conversation.

MICROPHONE ON will be temporarily displayed on the

screen.

Ringer mute

You can mute the ringer temporarily when the telephone

is ringing.

Press OFF/CLEAR or MUTE/REMOVE to temporarily

silence the ringer. The next call will ring normally.

Call waiting

If you subscribe to call waiting service from your telephone

company, you will hear an alert tone if there is an incoming

call while you’re on another call. Press /FLASH to answer

the new incoming call. Press /FLASH again to return to

the original call.

1.

2.

•RINGER MUTE

PHONE 0:00:00

MUTE

www.vtechphones.com

14

Telephone operation

** PAGING **

Chain dialing

This feature allows you to initiate a dialing sequence from numbers stored in the

directory, call log or redial list while you are on a call.

To access a number in the directory:

Press MENU/SELECT twice to enter the directory menu.

Scroll by pressing or to nd the desired entry.

Press MENU/SELECT to dial the desired number when it is displayed.

To access a number in the call log:

Press MENU/SELECT and then press to select >CALL LOG.

Press MENU/SELECT to conrm.

Scroll by pressing or to nd the desired entry.

Press MENU/SELECT to dial the desired number when it is displayed.

To access the last number in the redial list:

Press REDIAL/PAUSE to dial.

Press REDIAL/PAUSE again within two seconds to cancel the chain dialing.

Find handset

This feature allows the telephone base to page all the handsets.

Press FIND HANDSET on the telephone base. All the

handsets will ring and the screens display ** PAGING **.

Press /FLASH, /SPEAKER or any dialing key (0-9, #, *)

on the handset; or press FIND HANDSET on the telephone

base to end paging.

1.

2.

3.

1.

2.

3.

4.

•

1.

2.

Chain dialing

can be useful

if you wish to

access numbers

other than phone

numbers (such

as bank account

information or

access codes)

from the directory,

call log or redial

list.

•

www.vtechphones.com 15

Basic operation

Telephone operation

If the destination

handset does

not answer

the intercom

call within 100

seconds, is in

the directory, is

in the call log,

is on a call, or

out of range,

the originating

handset screen

will display

UNABLE TO

CALL TRY AGAIN

and return to idle

mode.

•

Intercom

The intercom feature allows conversation between two

registered handsets of the same system.

Model DS6111-2

Press INT on the originating handset when the handset is not in

use and its screen displays CALLING OTHER HANDSET.

The destination handset rings and its screen displays

OTHER HANDSET IS CALLING.

To answer the intercom call, press /FLASH, /SPEAKER,

INT or any dialing key (0-9,#,*) on the destination handset.

To end an intercom call, press INT, OFF/CLEAR or place

the handset back in the telephone base or charger.

Models DS6111-3/DS6111-4

Press INT on the originating handset when the handset is

not in use. The screen displays INTERCOM TO:

Use the dialing keys to select the destination handset. The

originating handset screen displays CALLING HANDSET X.

The destination handset rings and its screen displays

HANDSET X IS CALLING.

To answer the intercom call, press /FLASH, /SPEAKER,

INT or any dialing key (0-9,#,*) on the destination handset.

To end an intercom call, press INT, OFF/CLEAR or place

the handset back in the telephone base or charger.

1.

2.

3.

4.

1.

2.

3.

4.

5.

INTERCOM TO:

HANDSET X

IS CALLING

CALLING

HANDSET X

CALLING

OTHER HANDSET

IS CALLING

www.vtechphones.com

16

Telephone operation

Conference call

You can have a conference call with an external line and two registered handsets.

When one handset is on the line,

Press /FLASH or /SPEAKER on another handset to join the call.

-OR-

Model DS6111-2

Press INT to initiate an intercom call and its screen displays CALLING

OTHER HANDSET. The destination handset rings and its screen displays

OTHER HANDSET IS CALLING.

After the destination handset has been answered, press and hold INT on the

originating handset to let the destination handset join the call.

Models DS6111-3/DS6111-4

Press INT to initiate an intercom call. The screen displays TRANSFER TO:

Use the dialing keys to select the destination handset. The originating handset

screen displays CALLING HANDSET X.

The destination handset rings and its screen displays HANDSET X IS CALLING.

After the destination handset has been answered, press and hold INT on the

originating handset to let the destination handset join the call.

•

1.

2.

1.

2.

3.

4.

Page is loading ...

VTech DS6111-2 DS6111-3 User manual

VTech DS6111-2 DS6111-3 User manual

Related papers