Inalto IRGF90S Quick start guide

Brand: Inalto

Model: IRGF90S

Type: Quick start guide

Inalto IRGF90S is a 90cm Flat Glass Rangehood with a powerful 750m3/hr extraction rate, designed to eliminate smoke, odors, and grease from your kitchen. Its sleek designer flat glass and aluminum filters add a touch of elegance to your kitchen while effectively capturing cooking fumes. The rangehood features three fan speeds, allowing you to adjust the extraction power based on your cooking needs. It also includes two LED lights to illuminate your cooking area and a convenient push-button control panel for easy operation.

MODEL/IRGF90S WWW.INALTO.HOUSE

QUICK START GUIDE

90cm Flat Glass

Rangehood

FEATURES

Aluminium ﬁlters, 2 × LED lights,

750m/hr extraction, Push button controls,

Designer ﬂat glass, 3 speeds

QUICK START GUIDE

SUPPORT

Telephone: 1300 11 4357

Email: support@residentiagroup.com.au

DETAILS

Product Size (W, D, H):

895mm x 500mm x 554—1034mm

Congratulations on your new InAlto

90cm Flat Glass Rangehood!

MODEL/IRGF90S WWW.INALTO.HOUSE

INSTALLATION

Please refer to the dimensions of your

rangehood shown in the diagram on the right.

When positioning the rangehood for installation

and use, we advise that the rangehood is mounted

at a height of between 600—800mm above the

cooking surface for safety and performance of

your rangehood.

Gas cooktops must have a minimum of height of

650mm from the burner to the underside of

the rangehood.

Electric cooktops must have a minimum height of

600mm from the cooktop surface to the underside

of the rangehood.

For a complete guide, refer to the user manual

pages 5, 7—8.

Controls

Off button

Used for turning off the fan.

Low Speed button

This speed is used for basic ventilation on the kitchen. It is suitable

for simmering and cooking which does not make much steam.

Medium Speed button

This is ideal for standard cooking operation.

High Speed button

When a high density of smoke or steam is produced, use this speed for the

highest effective ventilation.

Light button

Pressing this turns the lighting on or off.

OPERATING YOUR RANGEHOOD

Your Esatto Canopy rangehood features push button controls with three speed

levels of extraction.

* Note: If Low / Medium / High speed buttons are press at the same time,

the unit will only operate at the highest speed.

THE CONTROLS

Your Flat Glass Rangehood Controls

1 Stop

2 Low Fan Speed

3 Medium Fan Speed

4 High Fan Speed

5 Light

For a complete guide on operating your

rangehood refer to user manual on page 6.

1 2 3 4 5

Speciﬁcations

Model Product dimensions (W,D,H mm)

ERGF90S 895mm × 500mm × 554–1034mm

Model Extraction Other features:

ERGF90S 750m3/hr extraction –3 speed push button control

–2 × 2W LED lights

–2 × Aluminium filters

YOUR RANGEHOODS

Rangehood components

Your Esatto Canopy Rangehood is supplied with:

–1 × Rangehood

–1 × Expandable 150mm ducting adapter

–1 × Packet of fasteners and wall plugs

–2 × Stainless Steel flue pieces (upper and lower)

–1 × Wall Bracket (“hook”) for the rangehood

–1 × Wall Bracket for the inside of the chimney pieces

–1 × “Outside Chimney” bracket

Typical installation tools required

You’ll most likely require the following tools/equipment

(not supplied) for the installation of your rangehood.

–Electrical drill

–Tape Measure

–Screw-driver

–Spirit Level

If ducting your rangehood, you’ll also most likely require:

–Jig saw

–Ladder

–Duct-tape

–Ducting

Inalto IRGF90S Quick start guide

Inalto IRGF90S Quick start guide

Inalto IRGF90S Quick start guide

Related papers

Other documents