Malco Andy Aluminum Handled Snips 12″ User guide

Brand
Malco
Model
Andy Aluminum Handled Snips 12″
Type
User guide
Andy Aluminum Handled Snips
and Ultra Lightweight Snips
Replacement Blade Guide
12-in. Pattern Cutting
Light Gray Frame:
Slim Contour Styling with
Large Loops
3-in. Inset Steel Blades
Flat Ground Edges
Extended Tips
Pressure Fit Blades
Uses existing pivot bolt.
No new fasteners needed.
M12N M12NG USE:
M12NRB
12-in. Combination Cutting
Dark Gray Frame:
Slim Contour Styling
with Large Loops
3-in. Inset Steel Blades:
Bevel Ground Edges
Extended Tips
Pressure Fit Blades
Uses existing pivot bolt.
No new fasteners needed.
MC12N MC12NG USE:
MC12NRB
12-in. Pattern Cutting
Light Gray Frame: Rounded
Contour Styling and Loops
3-in. Inset Steel Blades
Flat Ground Edges
12-in. Combination Cutting
Dark Gray Frame: Rounded
Contour Styling and Loops
3-in. Inset Steel Blades:
Bevel Ground Edges
12-in. Offset
Straight & Left Cutting
Dark Gray Frame: Sleek Contour
Styling and Large Loops
3-in. Inset Steel Blade: Bevel
Ground Edges
4 Screws supplied
with these blades.
4 Screws supplied
with these blades.
2 Screws supplied
with this blade.
M12A
MC12A
MC12L
Gripped
Gripped
USE:
M12ARB
USE:
MC12ARB
USE:
MC12LRB
14-in. Pattern Cutting
Light Gray Frame:
Slim Contour Styling with
Large Loops
3-1/4-in. Inset Steel Blades:
Flat Ground Edges
Pressure Fit Blades
Uses existing pivot bolt.
No new fasteners needed.
M14N USE:
M14NRB
Malco Products, SBC | Annandale, Minnesota, U.S.A. | www.malcotools.com | ©2023
U.S. 320-274-7387 - 800-328-3530 | Canada: 320-274-2376 - 800-219-1085 | International: 01-320-274-2376 SL17176B
14-in. Pattern Cutting
Light Gray Frame: Rounded
Contour Styling and Loops
3-1/4 in. Inset Steel Blades:
Flat Ground Edges 4 Screws supplied
with these blades.
M14A USE:
M14ARB
14-in. Combination Cutting
Dark Gray Frame: Rounded
Contour Styling and Loops
3-1/4 in. Inset Steel Blades:
Bevel Ground Edges 4 Screws supplied
with these blades.
MC14A USE:
MC14ARB
14-in. Combination Cutting
Dark Gray Frame: Slim
Contour Styling with
Large Loops
3-1/4 in. Inset Steel Blades:
Bevel Ground Edges
Pressure Fit Blades
Uses existing pivot bolt.
No new fasteners needed.
MC14N USE:
MC14NRB
12-in. Combination Cutting
Dark Gray Frame: Slim
Contour Styling with
Large Loops
3 in. Inset Steel Blades:
1 Bevel Ground Edge
1 Flat Ground Edge
Extended Tips
Pressure Fit Blades
Uses existing pivot bolt.
No new fasteners needed.
MV12 USE:
MV12RB
10-in. Combination Cutting
Black Frame: Rounded Contour
Styling and Loops
3 in. Inset Steel Blades:
1 Bevel Ground Edge
1 Flat Ground Edge
Pressure Fit Blades
Uses existing pivot bolt.
4 Screws supplied
with these blades.
ULV10 USE:
UVLV10RB
10-in. Combination Cutting
Black Frame: Rounded Contour
Styling and Loops
3 in. Inset Steel Blades:
Bevel Ground Edges
4 Screws supplied
with these blades.
ULC10
USE:
MC12ARB
Gripped
  • Page 1 1
  • Page 2 2

Malco Andy Aluminum Handled Snips 12″ User guide

Brand
Malco
Model
Andy Aluminum Handled Snips 12″
Type
User guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents