Malco Andy™ Offset Aluminum Handled Snips 12” User guide

Brand
Malco
Model
Andy™ Offset Aluminum Handled Snips 12”
Type
User guide
Andy Aluminum Handled Snips
and Ultra Lightweight Snips
Replacement Blade Guide
12-in. Pattern Cutting
Light Gray Frame:
Slim Contour Styling with
Large Loops
3-in. Inset Steel Blades
Flat Ground Edges
Extended Tips
Pressure Fit Blades
Uses existing pivot bolt.
No new fasteners needed.
M12N M12NG USE:
M12NRB
12-in. Combination Cutting
Dark Gray Frame:
Slim Contour Styling
with Large Loops
3-in. Inset Steel Blades:
Bevel Ground Edges
Extended Tips
Pressure Fit Blades
Uses existing pivot bolt.
No new fasteners needed.
MC12N MC12NG USE:
MC12NRB
12-in. Pattern Cutting
Light Gray Frame: Rounded
Contour Styling and Loops
3-in. Inset Steel Blades
Flat Ground Edges
12-in. Combination Cutting
Dark Gray Frame: Rounded
Contour Styling and Loops
3-in. Inset Steel Blades:
Bevel Ground Edges
12-in. Offset
Straight & Left Cutting
Dark Gray Frame: Sleek Contour
Styling and Large Loops
3-in. Inset Steel Blade: Bevel
Ground Edges
4 Screws supplied
with these blades.
4 Screws supplied
with these blades.
2 Screws supplied
with this blade.
M12A
MC12A
MC12L
Gripped
Gripped
USE:
M12ARB
USE:
MC12ARB
USE:
MC12LRB
14-in. Pattern Cutting
Light Gray Frame:
Slim Contour Styling with
Large Loops
3-1/4-in. Inset Steel Blades:
Flat Ground Edges
Pressure Fit Blades
Uses existing pivot bolt.
No new fasteners needed.
M14N USE:
M14NRB
Malco Products, SBC | Annandale, Minnesota, U.S.A. | www.malcotools.com | ©2023
U.S. 320-274-7387 - 800-328-3530 | Canada: 320-274-2376 - 800-219-1085 | International: 01-320-274-2376 SL17176B
14-in. Pattern Cutting
Light Gray Frame: Rounded
Contour Styling and Loops
3-1/4 in. Inset Steel Blades:
Flat Ground Edges 4 Screws supplied
with these blades.
M14A USE:
M14ARB
14-in. Combination Cutting
Dark Gray Frame: Rounded
Contour Styling and Loops
3-1/4 in. Inset Steel Blades:
Bevel Ground Edges 4 Screws supplied
with these blades.
MC14A USE:
MC14ARB
14-in. Combination Cutting
Dark Gray Frame: Slim
Contour Styling with
Large Loops
3-1/4 in. Inset Steel Blades:
Bevel Ground Edges
Pressure Fit Blades
Uses existing pivot bolt.
No new fasteners needed.
MC14N USE:
MC14NRB
12-in. Combination Cutting
Dark Gray Frame: Slim
Contour Styling with
Large Loops
3 in. Inset Steel Blades:
1 Bevel Ground Edge
1 Flat Ground Edge
Extended Tips
Pressure Fit Blades
Uses existing pivot bolt.
No new fasteners needed.
MV12 USE:
MV12RB
10-in. Combination Cutting
Black Frame: Rounded Contour
Styling and Loops
3 in. Inset Steel Blades:
1 Bevel Ground Edge
1 Flat Ground Edge
Pressure Fit Blades
Uses existing pivot bolt.
4 Screws supplied
with these blades.
ULV10 USE:
UVLV10RB
10-in. Combination Cutting
Black Frame: Rounded Contour
Styling and Loops
3 in. Inset Steel Blades:
Bevel Ground Edges
4 Screws supplied
with these blades.
ULC10
USE:
MC12ARB
Gripped
  • Page 1 1
  • Page 2 2

Malco Andy™ Offset Aluminum Handled Snips 12” User guide

Brand
Malco
Model
Andy™ Offset Aluminum Handled Snips 12”
Type
User guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents