Kval Endeavor System Quick Start

Brand: Kval

Model: Endeavor System

Type: Quick Start

Endeavor Line

Machine Start Summary

Power UP Each Machine

This is a summary of the start sequence for the

Endeavor Line. These instructions assume that a

Door Job has been created to be used in the ma-

chining process.

1. Verify the area of operation is clear

and safe to machine product.

2. Ensure factory air is applied to ma-

chine and main air supply is turned

on.

3. Verify that all E-Stop buttons are

OUT and Gates are CLOSED.

4. Turn the Electrical Disconnect to the

ON positions on each Electrical

Cabinet.

5. Turn the Control Transformer for each

machine.

6. Initiate the START MACHINE button (Ap-

proximately 3 minute Boot-up)

7. All Six Light Indicators Should be ON

8. KvalCam will be loaded and ready for

work

9. Initiate the Light Curtain Reset but-

tons on the Feeder and Stacker

Process

After the Operator Station has completed boot-

ing up, the KvalCAM User Interface will start

automatically. The program will default to the

Machine Line Screen.

Note: Every machine in the line will

Home. Each machine status will display

Idle in the Machine Feedback Status box

on completion

1. Select the Home Machine Line Button.

2. Press Auto Feed Button to get the line

ready for work.

Ensure all machines have completed

the Home sequence:

3. Select the Libraries Tab and Select a Door

Job from the List

4. Select the Edit Button from the buttons at the

bottom of the screen.

Note: The Edit button jumps to the Job Creation

Screen. If needed, create or add a feature to the door

job. For example select the Add From Library button to

add a predetermined template.

5. Ensure the door job is correct, and then en-

ter the Door Qty. of doors to be processed.

6. Select the Add to Queue button

Ensure all machines in the line

are Powered, Homed, are in Auto

mode and Light Curtain is Reset.

Ensure doors are loaded. and it is

safe to run doors.

7. Select the Feeder Tab

8. Enter number of doors to process in the

Door Qty. box

9. Press the Start Sequence button on the

Feeder Screen OR press the green Start

Sequence on the operator station.

General Information about KvalCam Interface Screens

http://www.kvalinc.com

Phone and Fax:

In the U.S./Canada,call (800) 553-5825 | fax (707) 762-0485

Outside the U.S. call (707) 762-7367|fax (707) 762-0485

Libraries

The gateway to choosing door jobs and

templates. Select Jobs and templates from

the list and process a door.

Machine Line

View the entire process of the machine line.

Home the all machines with one button. See

queued jobs, quantity of doors , remaining

doors, and status of each machine. Some

line control is available.

Feeder

Control the Feeder (ON-3) Includes auto

and manual control. Check Machine Log

(Complete history of machine) and Machine

Status.

Doorlite

Control the Doorlite (DL-NCD) Includes:

manual and auto control, feed control,

speed control, tool usage, tool cong.,

calibration and more. Check Machine Log

(Complete history of machine) and Machine

Status.

Endeavor

Control the Endeavor. Includes: manual and

auto control feed control, speed control,

tool cong, calibration and more. Check

Machine Log (Complete history of machine)

and Machine Status.

Stacker

Control the Stacker (ON-3): Includes auto

and manual control, and more. Set a se-

quence to Inspect Doors. Control the foam

protection for stacking doors the Check

Machine Log (Complete history of machine)

and Machine Status.

Door Job Creation

Create, edit, clone, delete, and download

door jobs and door templates. A powerful

and exible database of door cuts.

KvalCam is licensed by KVALinc

Kval Endeavor System Quick Start

Brand: Kval

Model: Endeavor System

Type: Quick Start

Download PDF

report

Kval Endeavor System Quick Start

Kval Endeavor System Quick Start

Related papers

Other documents