Prime-Line E 2483 Installation guide

Brand
Prime-Line
Model
E 2483
Type
Installation guide

Prime-Line E 2483 Deadbolt Strike is a replacement part for a door lock system. It fits over the existing bolt or latch hole and helps to secure the door when locked. The strike plate is made of durable materials and is easy to install. With the help of a drill, hammer, Phillips screwdriver, and chisel, you can remove the old strike plate, outline the new strike plate, remove enough of the jamb surface to allow the strike to fit flush with the face of the jamb, pre-drill screw holes, and install the strike plate. The strike plate comes with screws for installation.

Prime-Line E 2483 Deadbolt Strike is a replacement part for a door lock system. It fits over the existing bolt or latch hole and helps to secure the door when locked. The strike plate is made of durable materials and is easy to install. With the help of a drill, hammer, Phillips screwdriver, and chisel, you can remove the old strike plate, outline the new strike plate, remove enough of the jamb surface to allow the strike to fit flush with the face of the jamb, pre-drill screw holes, and install the strike plate. The strike plate comes with screws for installation.

Deadbolt Strike
Placa para perno fijo
Gâche sécurité à pêne
dormant
E-2483
NOTE: Installation drawings are typical for this style of replacement part.
They may not show a part identical to the one you are installing.
NOTA: Los dibujos para la instalación son genéricos para repuestos de este
tipo; por lo que podrían no mostrar una pieza idéntica a la que usted esté
instalando.
REMARQUE : Les dessins d'installation sont typiques pour ce style de pièce
de rechange. Ils pourraient ne pas illustrer une pièce identique à celle que
vous installez.
E 2483-INS
26950 San Bernardino Ave., Redlands, CA 92374
© 2010 Prime-Line Products
Drill with 3/32" and 5/32" bits
Taladro de brocas de 2 mm y 4 mm
Perceuse et forets de 2 mm et 4 mm
Phillips Screwdriver
Destornillador Phillips
Tournevis Phillips
Hammer
Martillo
Marteau
Chisel
Cincel
Ciseau
TOOLS NEEDED
HERRAMIENTAS REQUERIDAS
OUTILS REQUIS
1-1/8"
2.9 cm
2-3/4"
7 cm
Installation instructions
1. Remove old strike plate.
2. Place over existing bolt or latch hole and outline
strike plates with a pencil. Use a wood chisel to
remove enough of jamb surface to allow strikes to fit
flush with face of jamb.
3. Pre-drill screw holes with 3/32" drill bit for small
screws, 5/32" for large screws.
Instructions d’installation
1. Enlever l’ancienne gâche.
2. Poser sur le trou existant de pêne ou de loquet et
tracer la forme de la gâches à l’aide d’un crayon.
Utiliser un ciseau à bois pour enlever du bois de la
surface du jambage de façon que la gâches se pose
de niveau avec la face du jambage.
3. Percer les trous du vis avec 2 mm morceau de la
foreuse pour petits vis, 4 mm pour les grands vis.
Instrucciones para la instalacion
1. Quite la placa de tope vieja.
2. Coloque sobre el agujero existente para el pasador o
pestillo y trace el con torno de la placas de tope con
un lápiz. Con un escoplo para madera quite la madera
necesaria para permitir que la placas de tope quede al
mismo nivel de la cara de la jamba.
3. Los agujeros de tornillo de pre-taladro con 2 mm el
pedazo del taladro para los tornillos pequeños, 4 mm
para los tornillos grandes.
  • Page 1 1

Prime-Line E 2483 Installation guide

Brand
Prime-Line
Model
E 2483
Type
Installation guide

Prime-Line E 2483 Deadbolt Strike is a replacement part for a door lock system. It fits over the existing bolt or latch hole and helps to secure the door when locked. The strike plate is made of durable materials and is easy to install. With the help of a drill, hammer, Phillips screwdriver, and chisel, you can remove the old strike plate, outline the new strike plate, remove enough of the jamb surface to allow the strike to fit flush with the face of the jamb, pre-drill screw holes, and install the strike plate. The strike plate comes with screws for installation.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents