Festina F16826 Owner's manual

IFM0S20

MANUAL DE INSTRUCCIONES INSTRUCTION MANUAL MANUEL D’INSTRUCTIONS

BETRIEBSANLEITUNG MANUALE DI FUNZIONAMENTO

CHRONOGRAPH

CALENDAR

IFM0S20

3

9

15

21

27

CALENDAR

CRONOGRAPH

MANUAL DE INSTRUCCIONES

INSTRUCTION MANUAL

MANUEL D’INSTRUCTION

BETRIEBSANLEITUNG

MANUALE DI FUNZIONAMENTO

Page is loading ...

1110

IFM0S20

DISPLAYS AND BUTTONS

IFM0S20

SETTING THE TIME

1. Pull the crown out to the 2nd position.

2. Turn the crown to set hour and minute hands.

3. When the crown is pushed back to the normal position, small second hand 

begins to run.

SETTING THE DATE

1. Pull the crown out to the 1st position

2. Turn the crown counter-clockwise to set the date.

* If the date is set between the hours of around 9:00 PM and 1:00 AM, the 

date may not change on the following day.

3. After the date has been set, push the crown back to the normal position.

ESPAÑOLFRANÇAISDEUTSCHITALIANO ENGLISH

Hour hand

Button B

24 hour hand

Small Second hand

Button A

Chronograph

second hand

Normal crown

position

1st position

2nd position

Calendar

Minute hand

I

Chronograph

minute hand

1312

IFM0S20

USING THE CHRONOGRAPH

This chronograph is able to measure and display time in 1/1 second united up to maxinum

of 59 minutes 59 seconds.

The chronograph second hand keeps continuously for 59 minutes 59 seconds after

starting.

RESET

TIME

MEASUREMENT

STOP

A

B

[Measuring time with the chronograph]

1. The chronograph can be started and stopped each time button "A" is pressed.

2.Pressing button "B" resets the chronograph and the chronograph second hand and 

chronograph minute hand return to zero position.

B

IFM0S20

CHRONOGRAPH RESET (incl. after replacing battery)

1. Pull the crown out to the 2nd position.

2. Press button "A" to set the chronograph second hand to the zero position. 

The chronograph hand can be advanced rapidly by continuously pressing 

button "A".

3. Once the hand have been zeroed, return the crown to the normal position.

* Do not push crown to normal position while the chronograph second hand 

returns to zero position. It stops on the way when crown are returned to 

normal position and its position is recognized as zero position.

This procedure shoud be performed when the chronograph second hand does

not return to zero position after the chronograph has been reset, and including

after the battery has been replaced.

ESPAÑOLFRANÇAISDEUTSCHITALIANO ENGLISH

IFM0S20

MANUEL D’INSTRUCTION

Indications et boutons

Réglage de l'heure

Réglage de la date

Utilisation du chronographe

Réinitialisation du chronographe

(par ex. après le remplacement de la pile)

16

17

18

19

CHRONOMÈTRE

15

ENGLISH ESPAÑOLDEUTSCHITALIANO FRANÇAIS ENGLISH ESPAÑOLDEUTSCHITALIANO FRANÇAIS

By virtue of the regulations pursuant to the handling of waste products

deriving from electronic and electrical equipment, end of lifecycle watch

making products must be selectively collected for processing. You may therefore

dispose of your quartz watch making products at any of our retail outlets or any

other authorized collection point. The selective collection, processing, rating and

recycling of these products helps contribute to safeguarding the environment and

protecting our health.

14

IFM0S20

Page is loading ...

Festina F16826 Owner's manual

This manual is also suitable for

Festina F16826 Owner's manual

in other languages

Related papers

Other documents