2. MIYOTA
  3. Cal. 0S11 Chronograph

MIYOTA Cal. 0S11 Chronograph User manual

  • Hello! I have reviewed the MIYOTA 0S11 Chronograph instruction manual. This document covers how to set the time and date, use the chronograph function, and reset the chronograph hands. It also provides specifics about the push buttons and chronograph timing function. I'm ready to answer your questions about your watch.
  • How do I set the time?
    How do I set the date?
    How do I start the chronograph?
    How do I stop the chronograph?
    How do I reset the chronograph?
CHRONOGRAPH FUNCTION: CENTER CHRONOGRAPH SECOND HAND 1/1 sec.
Timing up to 59 minutes 59 seconds.
A) DISPLAYS AND BUTTONS
B) SETTING THE TIME
C) SETTING THE DATE
D) USING THE CHRONOGRAPH
E) CHRONOGRAPH RESET( INCL. AFTER REPLACING BATTERY)
A) DISPLAYS AND BUTTONS
B) SETTING THE TIME
1. Pull the crown out to the 2nd click position.
2. Turn the crown to set hour and minute hands.
3. When the crown is pushed back to the normal position, small second hand begins to run.
Cal. 0S11 Instruction manual
Chronograph
second hand
Button A
Button B
Minute hand
2nd Click Position
1st Click Position
Calendar
Second hand
Chronograph
minute hand
Hour hand
C) SETTING THE DATE
1. Pull the crown out to the 1st position.
2. Turn the crown counter-clockwise to set the date.
*If the date is set between the hours of around 9:00 PM and 1:00 AM,
the date may not changeon the following day.
3. After the date has been set, push the crown back to the normal position.
D) USING THE CHRONOGRAPH
This chronograph is able to measure and display time in
1/1 second united up to maxinum of 59 minutes59 seconds.
The chronograph 1/1 second hand keeps continuously for 59 minutes 59 seconds after starting.
Measuring time with the chronograph
1. The chronograph can be started and stopped each time button "A" is pressed.
2. Pressing button "B" resets the chronograph and the chronograph second hand and
chronograph minute hand return to zero position.
RESET
TIME
MEASUREMENT
STOP
"A"
"B"
"A"
"A"
"B"
2 / 3
E) CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY)
This procedure shoud be performed when the chronograph second hand does not return to the
Zero position after the chronograph has been reset to zero position,
and including after the battery has been replaced.
1. Pull the crown out to the 2nd Click Position.
2. Press button "A" to set the chronograph second hand to zero position.
The chronograph hand can beadvanced rapidly by continuously pressing button "A".
3. Once the hand have been reset to zero position, push the crown back to the normal position.
* Do not push the crown to normal position while the chronograph second hand returns to
zero position. It stops on the way when the crown are returned to normal position
and its position is recognized as zero position.
These specifications might be changed without prior notice.
3 / 3
/