KitSound KSNMBOWLBL User manual

KitSound
Brand
KitSound
Model
KSNMBOWLBL
Category
Portable speakers
Type
User manual

This manual is also suitable for

kitsound.co.uk
JB. 2587 / Made in China. © KitSound
™
2013
Christchurch, Dorset. BH23 4FL
Li-PO
Do not dispose of Lithium Polymer
batteries with general waste.
Please return it to battery recycling
collection point
MANUAL
MINI BUDDY
PORTABLE
SPEAKER
2 3
We are craftspeople. We are
musicians. We are KitSound
™
And we all commit ourselves to
achieving one shared goal: Bringing
people closer to their music. By truly
understanding music we stay true to
its craft. Pure, rich, incredible sound.
We’ll settle for nothing less.
4 5
At KS we believe your music deserves to
be showcased on great quality products
that don’t cost the earth. We might not
all share the same taste in music (the
ferocious disputes on music forums
prove that), but whether it’s Irish folk,
death metal or any number of obscure
genres which seem to be multiplying by
the minute, the artists responsible for
connecting with you through their craft
have bared their souls to do so. And we
think that’s worth celebrating.
6 7
Like the musicians we’re honouring,
we’re obsessed with our craft;
fine-tuning and tweaking our products
to make sure we constantly deliver
full-bodied, symphonic sound. So from
a single note played on a piano, to the
full impact of a bass guitar, you can rest
assured that you’ll always be doing
justice to your music.
8 9
Charging the battery
The Mini Buddy has a built-in rechargeable
lithium battery. Before charging, make
sure that the Mini Buddy is switched off.
Connect one end of the USB power cable
to the charging port of the Mini Buddy
and connect the other end to your PC
or USB mains adaptor. The battery will
start charging automatically.
Box contents
• Mini Buddy
• USB charge cable
• Keyring attachment
• Instruction manual
10 11
Using the speaker
1. Plug the 3.5 mm cable that is attached
to the Mini Buddy into the 3.5 mm
socket of your device
2. Switch on the speaker
3. Use your connected device to
play music/video and to control
volume level
Note:
• It takes 3 hours to fully charge
the battery
• Whilst charging, the LED will show blue
• When fully charged, the LED will not
change colour. However a 3 hour charge
is sufficient to fully charge the battery
12 13
Other information
Your device will have an internal
amplifier and if it is playing digital files
like MP3’s it will also have an integrated
DAC (Digital Audio Converter). If you turn
the volume up to 100%, your device will
be sending a distorted signal. To avoid
this and get the best quality from the
speaker, we recommend you do not run
your device any higher than 95% volume.
Some devices output higher than others
so you may need to reduce the volume if
you experience distortion.
Buddy pairing
If you have more than one Mini Buddy
speaker, you can pair them together
for greater sound. To do this:
• Connect the 3.5 mm cable from one
Mini Buddy speaker to the 3.5 mm
socket on another Mini Buddy speaker.
This can be repeated as many times
as you like
• Connect the remaining 3.5 mm cable to
your device to play your music/video’s
through all connected Mini Buddies
14 15
Specifications
• Frequency response: 100 hz–20 kHz
• Driver unit: 36 mm
• Impedance: 4 ohms
• Battery type: Li-Po rechargeable
• Jack plug: 3.5 mm
Troubleshooting
We hope you’ve now got all the information
you need to get started, but if you’re
having problems with anything,
please feel free to contact us at:
support
@
kitsound.co.uk
Care and maintenance
Wipe the unit with a soft dry dust cloth.
Do not use any wax, spray polish or
abrasive cleaners on them.
Caution:
Never allow any water or other liquids
to get inside the unit while cleaning.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

KitSound KSNMBOWLBL User manual

KitSound
Brand
KitSound
Model
KSNMBOWLBL
Category
Portable speakers
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents