HTC One C Spire Quick start guide

Type
Quick start guide
1. Insert the tip of the SIM
eject tool (or a small bent
paperclip) into the small
hole next to the microSIM
card tray, and push it all
the way in until the tray
ejects.
2. Pull the microSIM card
tray out. Place your
microSIM (contacts facing
down and cut-off corner
facing out) onto the tray,
and then insert the tray
back into the slot.
Go to www.htc.com/quickstart/. You’ll find tutorials, the
user guide, FAQs, latest news, and more.
Want some guidance on using your phone?
If not already inserted, follow the steps below to insert
a microSIM card to connect to a 4G/LTE network.
SIM eject tool
gold contacts
cut-o corner
microSIM
microSIM
Inserting your microSIM card
Your HTC One®
IMPORTANT: USE A STANDARD MICROSIM ONLY.
Inserting a smaller size SIM (such as nanoSIM with an
adapter or a modified SIM) may damage the card slot or
cause the card to not fit properly.
© 2013 HTC Corporation. All rights reserved. HTC, the HTC logo,
and HTC One are trademarks of HTC Corporation. LTE is a trademark
of ETSI.
91H0xxxx-xxM Rev.A
htc.com
  • Page 1 1
  • Page 2 2

HTC One C Spire Quick start guide

Type
Quick start guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI