Thomashilfen Seat minimizer Assembly Instructions

Type
Assembly Instructions

Thomashilfen Seat minimizer is a versatile accessory designed to provide additional support and comfort for users of the Swifty 2 Reha-Buggy. It consists of four main components: a seat wedge, head pillow, and two seat side guide pads. The seat wedge is placed on the seat surface, providing extra support for the user's back and pelvis. The head pillow is adjustable in height and can be used to provide support for the user's head and neck. The seat side guide pads help to keep the user securely in place and prevent them from sliding out of the buggy.

The Seat minimizer is easy to install and remove, making it a convenient option for users who need additional support on an occasional basis. It is also compatible with the lateral trunk supports, which can be used to provide even more support and stability for the user.

Thomashilfen Seat minimizer is a versatile accessory designed to provide additional support and comfort for users of the Swifty 2 Reha-Buggy. It consists of four main components: a seat wedge, head pillow, and two seat side guide pads. The seat wedge is placed on the seat surface, providing extra support for the user's back and pelvis. The head pillow is adjustable in height and can be used to provide support for the user's head and neck. The seat side guide pads help to keep the user securely in place and prevent them from sliding out of the buggy.

The Seat minimizer is easy to install and remove, making it a convenient option for users who need additional support on an occasional basis. It is also compatible with the lateral trunk supports, which can be used to provide even more support and stability for the user.

Sitzverkleinerer
Montageanleitung – Zubehör
Seat minimizer
Assembly instructions – Accessory
Swifty 2
2
1 2
3 4
5 6
3
7 8
9 10
11
4
Sitzverkleinerer Art.-Nr.: 6836
Der Sitzverkleinerer besteht aus 4 Teilen: Sitzkeil, Kopfpolster und zwei Sitzsei-
tenführungspolstern. Es wird mit der Anbringung des Sitzkeils begonnen.
Sitzkeil
Zur Positionierung des Sitzkeils den Reißverschluss des Rückenpolsters öffnen
und das Polster von der Rücken- und Sitzplatte entfernen. (Abb. 1) Den Sitz-
keil mit dem breiteren Ende auf die Sitzfläche stellen, sodass dieser direkt an
der Rückenplatte angelehnt ist. Nun kann der Klettstreifen vom Sitzkeil an die
Sitzfläche angebracht und der Sitzkeil fixiert werden. (Abb. 2) Anschließend
das Polster wieder über Sitz- und Rückenplatte ziehen und den Reverschluss
schließen.
Kopfpolster
Zunächst die Gurte der Oberkörperbegurtung von unten durch die Schnallen
des Kopfpolsters führen und die Gurte auf der Rückseite der Rückenplatte an
den Klappschnallen befestigen. (Abb. 3+4) Das Kopfpolster kann dann mit Hilfe
der Schnallen in der Höhe positioniert werden.
Sitzseitenführungspolster
Den Reißverschluss der Sitzseitenführungspolster der Swifty 2 öffnen und vom
Seitenblech entfernen. Anschließend die Sitzseitenführungspolster des Sitz-
verkleinerers über die Seitenbleche führen und die Reißverschlüsse schließen.
Dabei darauf achten, dass die dicken Polster zur Innenseite des Buggys zeigen.
(Abb. 5)
ACHTUNG: Beim Falten des Swifty 2 Reha-Buggys die Polster der Sitzseiten-
führung nach oben klappen, sodass sich die Polster zwischen Schiebegriffrohr
und Rückenplatte schieben können. (Abb. 6-8)
TIPP: Zur noch besseren Positionierung des Kindes können noch zusätzlich die
Thoraxpelotten eingesetzt werden. Dazu einfach die Pelotten an der Rücken-
platte montieren und das Rückenpolster über die Pelotten führen. (Abb. 9+10)
Alternativ können die senkrechten Schlitze im Rückenpolster aufgeschnitten und
die Thoraxpelotten durch die Schlitze gesteckt und montiert werden. (Abb. 11)
5
Seat minimizer Item code: 6836
The seat minimizer consists of 4 parts: seat wedge, head pillow and two seat
side guide pads. It is started with the fixing of the seat wedge.
Seat wedge:
For positioning of the seat wedge, open the zipper of the back upholstery and
remove the upholstery from the back and seat plate. (fig. 1) Put the seat wedge
with the broader end on the seat, so that this is leaning directly against the back
plate. Now stick the hook and loop strip of the seat wedge onto the seat plate
and secure the seat wedge with the hook and loop. (fig. 2) Afterwards pull the
upholstery over seat and backrest and close the zipper.
Head pillow:
First, guide the shoulder belts through the buckle of the head pillow from below
and fasten the belts on the rear of the back plate. (fig. 3+4) Then the head pil-
low can be positioned in height with the help of the buckles.
Seat side guide pads:
Open the zipper of the seat side guide pads of the Swifty 2 and remove them
from the side plates. Afterwards, pull the seat side guide pads of the seat mi-
nimizer over the side plates and close the zippers. Pay attention that the thick
upholstery point to the inside of the buggy. (fig. 5)
ATTENTION: When folding the Swifty 2 rehab stroller, flip the upholstery of the
seat side guide pads up, so that the upholstery can slide between push handle
and back plate. (fig. 6-8)
TIP: For better positioning of the child, the lateral trunk support can be used in
addition. Simply attach the pads on the back plate and laid the back upholstery
over the pads. (fig. 9+10) Alternatively, the vertical slits in the back upholstery
can be cut open to guide the lateral trunk supports through the slits. (fig. 11)
Thomas Hilfen für Körperbehinderte GmbH & Co. Medico KG · Walkmühlenstr. 1 · D - 27432 Bremervörde · Germany
Phone: +49 (0) 4761 8860 · Fax: +49 (0) 4761 886-19 · [email protected] · www.thomashilfen.com
Mitglied in der Internationalen
Fördergemeinschaft für Kinder-
und Jugendrehabilitation e.V.
Art.-Nr. / Item code: 95682, Stand / status: 2017-03, technische Änderungen vorbehalten / subject to technical alterations
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Thomashilfen Seat minimizer Assembly Instructions

Type
Assembly Instructions

Thomashilfen Seat minimizer is a versatile accessory designed to provide additional support and comfort for users of the Swifty 2 Reha-Buggy. It consists of four main components: a seat wedge, head pillow, and two seat side guide pads. The seat wedge is placed on the seat surface, providing extra support for the user's back and pelvis. The head pillow is adjustable in height and can be used to provide support for the user's head and neck. The seat side guide pads help to keep the user securely in place and prevent them from sliding out of the buggy.

The Seat minimizer is easy to install and remove, making it a convenient option for users who need additional support on an occasional basis. It is also compatible with the lateral trunk supports, which can be used to provide even more support and stability for the user.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages