2. Winners Only
  3. BTH1001Q

Winners Only BTH1001Q, BTG1001Q Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the Winners Only bed models BTB/BTG/BTH/BTP1001F and BTG/BTH/BTP1001Q. This document provides a detailed guide including diagrams for each step to help you put your bed together correctly and efficiently. I'm here to answer any questions you might have about the assembly process or any of the parts listed in the document.
  • What should I do before unpacking assembly parts?
    Should I keep hardware parts out of the reach of children?
    Is it recommended to assemble the product by myself?
Page 1 of 3
WINNERS ONLY
R
ASSEMBLY INSTRUCTIONS
Allen Bolts
Flat Washer
HB Left Leg
Slat
Support Leg
Slat
Support Leg
STEP 1: Attach the Wood Stretcher (D) to both Headboard Legs (A&B)
using provided hardware as shown on FIG.1
Caution:Pleasereadinstructionsthoroughlybeforeunpackingassemblyparts.Sharp,exposedstapletipscancauseinjury.Therefore,foryour
protection,pleaseremoveanyexposedstaplesusedinpacking.
Pleasekeepallhardwarepartsoutofthereachofchildren.
1.Werecommendthatyoushouldassemblethisproductwiththeassistanceofanotherperson;thiswillmakeassemblyeasierandwillhelpto
eliminatedamagetotheproductorinjurytopersonsduringassembly.
2.Besuretocheckallpackingmaterialscarefullyforsmallpartsthatmayhavecomelooseinsidethecartonduringshipment.
3.Pleasedonotovertightenscrewsorbolts.
4.Pleaseputallpartsonanon-abrasivefloorbeforeassembly,andfollowtheassemblystepstoassembleyournewlypurchasedproduct
correctlyandefficiently.
PROD.NO : BTG/BTH/BTP1001Q
PROD.NO : BTB/BTG/BTH/BTP1001F
WINNERS ONLYR
ASSEMBLY INSTRUCTIONS
Page 2 of 3
STEP 3: Attach both Bed Rails (F) to the Headboard
assembly (A,B,D&C) using the provided hardware as
shown on FIG.3
STEP 3: Attach both Bed Rails (F) to the Footboard (E)
using the provided hardware as shown on FIG.4
STEP 2: Attach the Headboard (C) to the Legs
assembly (A,B&D) using provided hardware as
shown on FIG.2
PROD.NO : BTG/BTH/BTP1001Q
PROD.NO : BTB/BTG/BTH/BTP1001F
Page 3 of 3
WINNERS ONLY
R
ASSEMBLY INSTRUCTIONS
STEP 5: Attach Support Legs (H) to Slats (G)as shown on FIG.5.
STEP 6: Attach Slats with Support legs (G&H) to the Side Rail
(F) using the provided hardware as shown on FIG.6
Assembly is now completed.
PROD.NO : BTB/BTG/BTH/BTP1001F
PROD.NO : BTG/BTH/BTP1001Q
/