2. U-Prox
  3. U-Prox CLC Controller

U-Prox U-Prox CLC Controller User guide

  • Hello! I've reviewed the How-To guide for the U-Prox CLC Controller. This document includes wiring diagrams, app-based configuration instructions and different settings you can adjust. I'm ready to answer your questions about setting up and using the device.
  • What is the default installer code?
    How do I access the configuration settings?
    What can be adjusted in the settings?
How-To Guide
Setup Guide for:
101-059 U-Prox CLC Controller with Standalone Option
Page 1 of 6Rev 1.0
Controller with Standalone Option
U-Prox CLC
Controller with Standalone Option
& REX
Button)
Wiring Diagram
Button)
How-To Guide
Page 2 of 6
Controller with Standalone Option
U-Prox CLC
Controller with Standalone Option
& REX
Button)
Wiring Diagram
Button)
How-To Guide
Page 3 of 6
How-To Guide
Page 3 of 6
Open the U
Open the U
-
Prox Config App and search for the device
Prox Config App and search for the device
How-To Guide
Page 4 of 6
Select the device and select the Plug Icon to enter configuration
Select the device and select the Plug Icon to enter configuration
Select the device and select the Plug Icon to enter configuration
How-To Guide
Page 5 of 6
Enter the Installer Code (Default is 1234)
Enter the Installer Code (Default is 1234)
Enter the Installer Code (Default is 1234)
Enter the Installer Code (Default is 1234)
Enter the Installer Code (Default is 1234)
Enter the Installer Code (Default is 1234)
Enter the Installer Code (Default is 1234)
Enter the Installer Code (Default is 1234)
Enter the Installer Code (Default is 1234)
Enter the Installer Code (Default is 1234)
How-To Guide
Page 6 of 6
Go to Settings and adjust as needed
Go to Settings and adjust as needed
- Change Installer code
- Adjust Relay Time
- Adjust Working Hours
Innovative Electronic Solutions
www.ness.com.au
National Customer Service Centre
Ph: 1300 551 991
[email protected]
/