JRC JCY-1800 - Installation guide

VDR/S-VDR Real Time Monitor

Installation Manual

Version 1.2

VDR/S-VDR

01ETM ISO 9001, ISO 14001 Certified

Printed in Japan

Marine Service Department

+81-3-3492-1305

+81-3-3779-1420

[email protected]

Telephone :

Facsimile :

e-mail :

AMSTERDAM Branch

Telephone :

Facsimile :

e-mail :

+31-20-658-0750

+31-20-658-0755

[email protected]

SEATTLE Branch

Telephone :

Facsimile :

e-mail :

+1-206-654-5644

+1-206-654-7030

[email protected]

CODE No.7ZPJD0380A

JUL. 2007 Edition 2 JRC

Not use the asbestos

For further information,contact:

URL http://www.jrc.co.jp

JCY-1800/1850

Record of Revisions

VDR/S-VDR Real Time Monitor / Installation Manual

i

Record of Revision

Rev Description Date Approved by Checked by

1.0 First Edition 07-Feb-1st M.Takayama R.Uchijima

1.2 Added example of connection 07-Jul-23rd M.Takayama R.Uchijima

Before Using

VDR/S-VDR Real Time Monitor / Installation Manual

ii

< Before Using >

Icons

This manual and product employ various icons to enable users to use the product safety and

correctly, and to prevent any harm to users or others, and to prevent damage to the property.

The icons and the meanings are indicated below.

Example of icons

The △ symbole indicates a caution (including danger or warning).

Inside of the symbol indicates the actual details (this icon indicates the

caution regarding electric shock).

The symbol indicates prohibition.

The actual contents (this icon indicates “disassembly prhibited”) are

provided inside or alongside of the symbol

The ● symbol indicates an action or insutruction. The actual contenst (this

icon indicates removal of the power plug from socket) are provided inside of

the symbol

Electric

shock

Disassembly

prohibited

Remove

Plug

WARNING Incorrect use of the equipment by ignoring this icon may cause death

or a seruous injury.

CAUTION

Incorrect use of the equipment by ignoring this icon may cause an

injury or physical damage.

Notes on Using

VDR/S-VDR Real Time Monitor / Installation Manual

iii

< Notes on Using >

Do not disassemble or remodel this equipment.

Such action may cause fire, electric shock, or an equipment fault.

Do not use any AC/DC adaptor other than attachment.

Such action may cause fire, electric shock, or an equipment fault.

Do not use any power supply voltage other than the specified voltages.

Such action may cause fire, electric shock, or an equipment fault.

Do not use any battery other than specification.

Such action may cause burst of a battery by liquid leak, fire, or injury.

Do not put containers into which it went, such as water, or a small metal thing on

this equipment top or near.

When water enters or a metal thing falls into the equipment, it becomes the cause

of a fire, an electric shock, and failure.

Do not damage a power cord or process it.

If put a heavy thing, heat, it pulls or it bends by force, a power cord will be

damaged and it may become the cause of fire and electric shock.

When a fault occurs, turn off the power supply of this equipment, remove the plug,

and contact the Sales Department of Japan Radio Company, nearest branch

company, branch office, sales office, or our agent.

Continuous use may cause fire or electric shock.

Do not check or repair the inside of the equipment by yourself.

Checking or repair by anyone other than the specialist maintenance staff may

cause fire or electric shock.

Request checking or repair of the inside of the equipment to the sales Department

of Japan Radio Company, nearest branch company, branch office, sales office, or

our agent.

Before Using

VDR/S-VDR Real Time Monitor / Installation Manual

iv

CAUTION

Do not install the equipment in the location affected by water, humidity, dust, or

soot. It may become the cause of fire, electric shock, or a fault.

Do not put in from a vent foreign substance, such as metal or a thing which is

easy to burn.

It may become the cause of fire, electric shock, or a fault.

Do not put on a place with many vibration and shocks.

It may fall and may become the cause of an injury and failure.

Do not wet this equipment or do not put in water.

It may become the cause of electric shock, or a fault.

Do not plug up the vent of this equipment.

It may be filled with heat and fire and failure may occur.

When the equipment is not used for a long time, pull out a power supply plug

from a wall socket for safety.

It may become the cause of fire or electric shock.

Pull out a plug from a wall socket for safety at the time of care.

It may become the cause of fire or electric shock.

Be careful of a computer virus.

If a computer is infected with a virus, it may suffer the damage of an unusual

display, a program, and data being destroyed, and may become the cause of

failure.

Please confirm whether it is infected with the computer virus, using a virus

checker program periodically.

Contents

VDR/S-VDR Real Time Monitor / Installation Manual

v

< Before Using > ...................................................................................................................... ii

< Notes on Using >.................................................................................................................. iii

Chapter1 Installation Procedure...............................................................................................1

Chapter2 System Composition.................................................................................................3

2.1 Basic Composition ......................................................................................................................... 3

2.2 In case of connecting with user LAN ............................................................................................. 4

2.3 In case of connecting with Radar IF (NWP-46) ............................................................................. 5

Chapter3 Wiring Diagrams .......................................................................................................7

Chapter 4 Wiring ....................................................................................................................11

4.1 In case of JCY-1800 VDR ........................................................................................................... 11

4.2 In case of JCY-1850 S-VDR........................................................................................................ 12

4.3 Wiring to VDR IF（Router）........................................................................................................ 13

Chapter5 Setup VDR/S-VDR by Maintenance software ........................................................15

Chapter6 PC (Server/Client) Setup ........................................................................................19

6.1 PC Specification .......................................................................................................................... 19

6.2 Setup Items of PC........................................................................................................................ 19

6.2.1 Set the IP address .............................................................................................................................. 19

6.2.2 Stop automatic synchronization with an Internet time server .............................................................. 23

6.2.3 Stop the Remote Assistance............................................................................................................... 24

6.2.4 Stop the Automatic Updates ............................................................................................................... 26

6.2.5 Stop the Error Reporting ..................................................................................................................... 28

6.2.6 Invalidate the Windows Firewall.......................................................................................................... 31

6.2.7 Set the Power Options ........................................................................................................................ 35

6.3 Install the VDR/S-VDR Real Time Monitor software ................................................................... 37

6.4 Uninstall the VDR/S-VDR Real Time Monitor software............................................................... 41

6.5 Initial setup for the VDR/S-VDR Real Time Monitor.................................................................... 42

6..5.1 Setup.................................................................................................................................................. 43

Chapter7 Final Check.............................................................................................................57

Chapter8 Trouble Shooting ....................................................................................................59

Contents

VDR/S-VDR Real Time Monitor / Installation Manual

vi

Chapter9 Appendix.................................................................................................................61

9.1 How to eject CF card from VDR/S-VDR ...................................................................................... 61

9.2 Example of connection ................................................................................................................ 63

9.2.1 Example1 In case of only one VDR/S-VDR Real Time Monitor........................................................ 65

9.2.2 Example2 In case of connecting with Client PC ............................................................................... 70

9.2.3 Example3 In case of connecting with Client PC and Radar IF ......................................................... 78

9.2.4 Example4 In case of connecting with Client PC ............................................................................... 88

9.2.5 Example5 In case of connecting with Client PC and VDR IF............................................................ 98

9.2.6 Example6 In case of connecting with Client PC ............................................................................. 110

9.2.7 Example7 In case of connecting with Client PC and Radar IF ....................................................... 123

9.3 Hyper Terminal Setup................................................................................................................ 142

9.3.1 Starting.............................................................................................................................................. 142

9.3.2 End 144

9.4 Installation Flow for Server PC .................................................................................................. 145

9.5 Installation Follow for Client PC................................................................................................. 146

Chapter1 Installation Procedure

VDR/S-VDR Real Time Monitor / Installation Manual

1

Chapter1 Installation Procedure

General Procedure

(1) Mounting the necessary unit

(2) Wiring the cable connected unit in according with installation drawings

(3) Checking wiring condition

(4) Setup of VDR/SVDR by Maintenance software

(5) Setup of PC in which the VDR/S-VDR Real Time Monitor is installed

(6) Final check

When Radar IF is connected to VDR/S-VDR, VDR IF (Router)

should be connected for separation between Radar IF and user

LAN.

The Firewall of the VDR IF unit is invalidated beforehand at factory

shipment.

If the operation check is completion, the firewall should be

validated.

Attention

Note

This installation manual is described for version 1.2 of VDR/S-VDR

Real Time Monitor software.

Since the VDR IF (Router) model is changed from AR410 to

AR415S, do not mistake it.

Attention

To set up the VDR/S-VDR for VDR/S-VDR Real Time Monitor, use

the latest Maintenance software (Ver. 1.2.0A).

If your Maintenance software is old version, download the latest

version from Marin Service Home Page.

Attention

Chapter1 Installation Procedure

VDR/S-VDR Real Time Monitor / Installation Manual

2

Blank Page

Chapter2 System Composition

VDR/S-VDR Real Time Monitor / Installation Manual

3

Chapter2 System Composition

Since the system configuration is possible various combinations, it explains here by some typical

compositions.

2.1 Basic Composition

Fig. 2.1-1

Table 2.1-1 Composition Unit

No. Unit Number Note

1. VDR/S-VDR Real Time Monitor 1 Standard Windows PC

2. External HDD

(Moreover one spare is necessary

to collect data for the landside.)

2 USB2.0

HDD size is decided according to the record

period and the record contents.

VDR Network

Capsule

RCU

VDR/S-VDR JCY-1800/1850 Voyage Data

Radar Image

Audio(VHF)

Record

Data

Real Time Monitor

Chapter2 System Composition

VDR/S-VDR Real Time Monitor / Installation Manual

4

2.2 In case of connecting with user LAN

The PCs of each room are connected with user LAN as a monitor terminal, and the system can

be enhanced.

In that case, one Server PC is necessary to deliver data to the Client PCs.

In addition, the number of monitor terminal as Client PC that can be connected with Server PC is

three or less.

Fig. 2.2-1

Table 2.2-1 Composition Unit

No. Unit Number Note

1. VDR/S-VDR Real Time Monitor

(Server)

1 Standard Windows PC

2. External HDD

(Moreover one spare is necessary

to collect data for the landside.)

2 USB2.0

HDD size is decided according to the record

period and the record contents.

3.

VDR/S-VDR Real Time Monitor

(Client)

3 Standard Windows PC

A maximum of three set

4. Switching HUB 1 For connecting with monitor terminals

VDR Network

Capsule

RCU

VDR/S-VDR JCY-1800/1850 Voyage Data

Radar Image

Audio (VHF)

Record

Data

User LAN

Monitor

Terminal1

(Client)

Monitor

Terminal2

(Client)

Monitor

Terminal3

(Client)

(Server)

Real Time Monitor

Switching

HUB

Chapter2 System Composition

VDR/S-VDR Real Time Monitor / Installation Manual

5

2.3 In case of connecting with Radar IF (NWP-46)

In the VDR/S-VDR equipment main Radar image is recorded, and it is possible to capture or

record images of sub Radar, ECDIS and Conning by Radar IF in the VDR/S-VDR Real Time

Monitor.

And, VDR IF (Router) is needed to separate the Radar IF from user LAN.

Fig. 2.3-1

Table 2.3-1 Composition Unit

No. Unit Number Note

1. Real Time Monitor (Server) 1 Standard Windows PC

2. External HDD

(Moreover one spare is necessary

to collect data for the landside.)

2 USB2.0

HDD size is decided according to the record

period and the record contents.

In case of addition of option images

1. Radar IF 1 For ECDIS Image

2. VDR IF 1 Router and HUB functions

VDR/S-VDR Network

Real Time Monitor

Capsule

RCU

Voyage Data

Radar Image

Audio

Record

Data

VDR IF

Radar IF

VDR/S-VDR JCY-1800/1850

Chapter2 System Composition

VDR/S-VDR Real Time Monitor / Installation Manual

6

Blank Page

Chapter3 Wiring Diagrams

VDR/S-VDR Real Time Monitor / Installation Manual

7

Chapter3 Wiring Diagrams

VDR/S-VDR Real Time Monitor INTERCONNECTION DIAGRAM

NOTE

1. *1 Shielded LAN Cable(Cat5) : Dock Yard supply

2. *2 PC : Owner supply

3. *3 JCY-1800 : EXT-LAN

JCY-1850 : JRC-LAN

RJ-45

AC

JCY-1800/1850

VDR/S-VDR

EXT-LAN *3

*1 Ethernet cable

(Shield Twist-Pair cable)

Max. 30m

VDR/S-VDR

Real Time Monitor

PC (*2)

192.168.0.254

192.168.0.251

Fig. 3.1 Basic Composition

Chapter3 Wiring Diagrams

VDR/S-VDR Real Time Monitor / Installation Manual

8

VDR/S-VDR Real Time Monitor & Onboard LAN (Example) INTERCONNECTION DIAGRAM

HUB

VDR/S-VDR

Real Time Monitor

Server PC (*2)

On Board LAN System (Example)

AC

LAN

JCY-1800/1850

VDR/S-VDR

EXT-LAN *3

*1 Ethernet cable

(Shield Twist-Pair cable)

Max. 30m

NOTE

1. *1 Shielded LAN Cable(Cat5) : Dock Yard supply

2. *2 PC : Owner supply

3. *3 JCY-1800 : EXT-LAN

JCY-1850 : JRC-LAN

LAN

RJ-45

VDR/S-VDR

Real Time Monitor

Client PC1 (*2)

VDR/S-VDR

Real Time Monitor

Client PC2 (*2)

VDR/S-VDR

Real Time Monitor

Client PC3 (*2)

192.168.0.254

192.168.0.251

192.168.0.250

192.168.0.249

192.168.0.248

Fig. 3.2 In case of connecting with user LAN

Chapter3 Wiring Diagrams

VDR/S-VDR Real Time Monitor / Installation Manual

9

VDR/S-VDR Real Time Monitor & Onboard LAN (Example) INTERCONNECTION DIAGRAM

VDR IF(Router)

VDR/S-VDR

Real Time Monitor

Server PC (*2)

VDR/S-VDR

Real Time Monitor

Client PC1 (*2)

VDR/S-VDR

Real Time Monitor

Client PC2 (*2)

VDR/S-VDR

Real Time Monitor

Client PC3 (*2)

On Board LAN System (Example)

AC

LAN

JCY-1800/1850

VDR/S-VDR

EXT-LAN *3

*1 Ethernet cable

(Shield Twist-Pair cable)

Max. 30m

NOTE

1. *1 Shielded LAN Cable(Cat5) : Dock Yard supply

2. *2 PC : Owner supply

3. *3 JCY-1800 : EXT-LAN

JCY-1850 : JRC-LAN

LAN

RJ-45

NWP-46

Radar IF

LAN

HUB

WAN

LAN

192.168.0.250

192.168.0.249

192.168.0.248

192.168.0.251

192.168.0.254

192.168.111.100

192.168.0.100

192.168.111.152

Fig. 3.3 In case of connecting with the Radar Interface (NWP-46)

Chapter3 Wiring Diagrams

VDR/S-VDR Real Time Monitor / Installation Manual

10

Blank Page

Chapter4 Wiring

VDR/S-VDR Real Time Monitor / Installation Manual

11

Chapter 4 Wiring

4.1 In case of JCY-1800 VDR

Open the door of VDR, and connect LAN cables as following.

Maintenance PC:

Connect LAN cable to “VDR-LAN” (Not used port) of MCB.

VDR/S-VDR Real Time Monitor PC:

Connect LAN cable to “EXT-LAN” port of RMB.

VDR/S-VDR

Real Time Monitor PC：

EXT－LAN へ

Maintenance PC:

VDR－LAN へ

Chapter4 Wiring

VDR/S-VDR Real Time Monitor / Installation Manual

12

4.2 In case of JCY-1850 S-VDR

Open the door of S-VDR, and connect LAN cables as following.

Maintenance PC:

Connect LAN cable to “VDR-LAN” (Not used port) of MCB.

VDR/S-VDR Real Time Monitor PC:

Connect LAN cable to “JRC-LAN” port of MCB.

VDR/S-VDR

Real Time Monitor PC：

JRC－LAN へ

Maintenance PC:

VDR－LAN へ

Page is loading ...

JRC JCY-1800 - Installation guide

JRC JCY-1800 - Installation guide

Other documents