The information contained herein is deemed accurate as of 3/30/2023 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 1 OF 2
Model G0843P
MACHINE DATA
SHEET
Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901
MODEL G0843P 12" DOUBLE DISC SANDER ‐ POLAR BEAR
SERIES
Product Dimensions:
Weight................................................................................................................................................................ 79 lbs.
Width (side-to-side) x Depth (front-to-back) x Height..................................................................... 29-1/2 x 16 x 16 in.
Footprint (Length x Width)............................................................................................................................25 x 16 in.
Shipping Dimensions:
Type..................................................................................................................................................... Cardboard Box
Content........................................................................................................................................................... Machine
Weight................................................................................................................................................................ 84 lbs.
Length x Width x Height....................................................................................................................... 26 x 19 x 18 in.
Must Ship Upright................................................................................................................................................... Yes
Electrical:
Power Requirement............................................................................................................ 110V, Single-Phase, 60Hz
Full-Load Current Rating.......................................................................................................................................... 7A
Minimum Circuit Size..............................................................................................................................................15A
Connection Type....................................................................................................................................... Cord & Plug
Power Cord Included.............................................................................................................................................. Yes
Power Cord Length.................................................................................................................................................6 ft.
Power Cord Gauge......................................................................................................................................... 16 AWG
Plug Included..........................................................................................................................................................Yes
Included Plug Type.................................................................................................................................... NEMA 5-15
Switch Type.................................................................................................. Paddle Safety Switch w/Removable Key
Motors:
Main
Horsepower............................................................................................................................................. 3/4 HP
Phase............................................................................................................................................ Single-Phase
Amps.............................................................................................................................................................. 7A
Speed................................................................................................................................................ 1720 RPM
Type.................................................................................................................. TEFC Run-Capacitor Induction
Power Transfer ............................................................................................................................... Direct Drive
Bearings........................................................................................................ Sealed & Permanently Lubricated
Main Specifications:
Disc Sander Info
Disc Diameter............................................................................................................................................ 12 in.
Disc Speed........................................................................................................................................ 1720 RPM
Disc Sandpaper Backing Type.................................................................................................................... PSA
Table Length........................................................................................................................................15-1/2 in.
Table Width..................................................................................................................................................9 in.
Table Thickness........................................................................................................................................5/8 in.
Table Tilt............................................................................................................................................. 0–45 deg.
Table-to-Floor Height...........................................................................................................................9-5/16 in.
The information contained herein is deemed accurate as of 3/30/2023 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 2 OF 2
Model G0843P
Construction Materials
Base........................................................................................................................................................... Steel
Table...................................................................................................................................................Aluminum
Frame......................................................................................................................................................... Steel
Disc.....................................................................................................................................................Aluminum
Miter Gauge........................................................................................................................................ Aluminum
Paint Type/Finish....................................................................................................................................Enamel
Other Related Info
Miter Gauge Slot Width.............................................................................................................................5/8 in.
Miter Gauge Slot Height........................................................................................................................... 1/4 in.
Number of Dust Ports....................................................................................................................................... 2
Dust Port Size........................................................................................................................................2-1/2 in.
Other Specifications:
Country of Origin ................................................................................................................................................ China
Warranty ........................................................................................................................................................... 1 Year
Approximate Assembly & Setup Time ........................................................................................................10 Minutes
Serial Number Location .................................................................................................................................. ID Label
Sound Rating ..................................................................................................................................................... 60 dB
Features:
Dual Sanding Discs
Dual 2-1/2" Dust Ports
Table Tilt Range 0 to 45 Deg.
Accepts 12" PSA Sanding Discs
Accessories Included:
Aluminum Miter Gauge
Open-End Wrench 7/8"
Open-End Wrench 8/10mm
Open-End Wrench 12/14mm
Phillips Screwdriver #1
/
