Grizzly G0843P Owner's manual

Brand: Grizzly

Model: G0843P

Category: Power sanders

Type: Owner's manual

The information contained herein is deemed accurate as of 3/30/2023 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 1 OF 2

Model G0843P

MACHINE DATA

SHEET

Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901

MODEL G0843P 12" DOUBLE DISC SANDER ‐ POLAR BEAR

SERIES

Product Dimensions:

Weight................................................................................................................................................................ 79 lbs.

Width (side-to-side) x Depth (front-to-back) x Height..................................................................... 29-1/2 x 16 x 16 in.

Footprint (Length x Width)............................................................................................................................25 x 16 in.

Shipping Dimensions:

Type..................................................................................................................................................... Cardboard Box

Content........................................................................................................................................................... Machine

Weight................................................................................................................................................................ 84 lbs.

Length x Width x Height....................................................................................................................... 26 x 19 x 18 in.

Must Ship Upright................................................................................................................................................... Yes

Electrical:

Power Requirement............................................................................................................ 110V, Single-Phase, 60Hz

Full-Load Current Rating.......................................................................................................................................... 7A

Minimum Circuit Size..............................................................................................................................................15A

Connection Type....................................................................................................................................... Cord & Plug

Power Cord Included.............................................................................................................................................. Yes

Power Cord Length.................................................................................................................................................6 ft.

Power Cord Gauge......................................................................................................................................... 16 AWG

Plug Included..........................................................................................................................................................Yes

Included Plug Type.................................................................................................................................... NEMA 5-15

Switch Type.................................................................................................. Paddle Safety Switch w/Removable Key

Motors:

Main

Horsepower............................................................................................................................................. 3/4 HP

Phase............................................................................................................................................ Single-Phase

Amps.............................................................................................................................................................. 7A

Speed................................................................................................................................................ 1720 RPM

Type.................................................................................................................. TEFC Run-Capacitor Induction

Power Transfer ............................................................................................................................... Direct Drive

Bearings........................................................................................................ Sealed & Permanently Lubricated

Main Specifications:

Disc Sander Info

Disc Diameter............................................................................................................................................ 12 in.

Disc Speed........................................................................................................................................ 1720 RPM

Disc Sandpaper Backing Type.................................................................................................................... PSA

Table Length........................................................................................................................................15-1/2 in.

Table Width..................................................................................................................................................9 in.

Table Thickness........................................................................................................................................5/8 in.

Table Tilt............................................................................................................................................. 0–45 deg.

Table-to-Floor Height...........................................................................................................................9-5/16 in.

The information contained herein is deemed accurate as of 3/30/2023 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 2 OF 2

Model G0843P

Construction Materials

Base........................................................................................................................................................... Steel

Table...................................................................................................................................................Aluminum

Frame......................................................................................................................................................... Steel

Disc.....................................................................................................................................................Aluminum

Miter Gauge........................................................................................................................................ Aluminum

Paint Type/Finish....................................................................................................................................Enamel

Other Related Info

Miter Gauge Slot Width.............................................................................................................................5/8 in.

Miter Gauge Slot Height........................................................................................................................... 1/4 in.

Number of Dust Ports....................................................................................................................................... 2

Dust Port Size........................................................................................................................................2-1/2 in.

Other Specifications:

Country of Origin ................................................................................................................................................ China

Warranty ........................................................................................................................................................... 1 Year

Approximate Assembly & Setup Time ........................................................................................................10 Minutes

Serial Number Location .................................................................................................................................. ID Label

Sound Rating ..................................................................................................................................................... 60 dB

Features:

Dual Sanding Discs

Dual 2-1/2" Dust Ports

Table Tilt Range 0 to 45 Deg.

Accepts 12" PSA Sanding Discs

Accessories Included:

Aluminum Miter Gauge

Open-End Wrench 7/8"

Open-End Wrench 8/10mm

Open-End Wrench 12/14mm

Phillips Screwdriver #1