Page is loading ...
INSTRUCTIONS FOR USE
FOOD GRADE DIAPHRAGM PUMP DPP-30
Congratulations on your purchase of this world class premium construction Food grade
diaphragm pump
Features:
1. Food Grade pump , manufactured from approved materials for use with liquid food stuffs making the
pump useful for applications in agriculture , preserving , wine making & food oil production
2. Hand Operated Diaphragm Pump designed to work in any position- Vertical, Horizontal, Upside
Down etc.
3. 2 Way Operation: Pumping direction can be reversed by simply reversing the suction & delivery pipes
4. Repositionable pump handle makes installation very easy
5. Dispenses 4.40 gallons per minute (16.6 litres per minute)
6. Temperature range : -10° C to +40° C ( 14°F to 104°F)
Piece Count:
1. Pump Body
2. Suction & Discharge Hose (1” I.D. x 4 metre)
3. Delivery Nozzle
4. Stainless Steel Hose Clamps (3)
Lever Handle
Pump Body
Suction /
Discharge Hose
Delivery
Nozzle
Pump
Body
Hose
Clamps
WETTED COMPONENTS:
Food Grade Polyacetal, Food Grade Thermoplastic Polyurethane & Food Grade PVC
ASSEMBLY & OPERATION:
1. Remove the Pump Body from the pack. Pump Body has 4 mounting holes. Mount the body using
these holes & screws. The body can be mounted in any direction, upside down, vertically, horizontally
etc.
2. Top of the Pump Body has the Lever mechanism. Position of the lever handle can be changed,
depending where the pump is mounted. The lever mechanism is fitted onto the body by means of a
bayonet connection. Turning it anti-clockwise will open the connection. Adjust handle position , fit it
back & lock by turning in the clockwise direction
3. The Pump body has 2 ports, clearly marked as IN & OUT. Cut the hose supplied in 2 parts, one for
the suction end & the other for discharge. Slide the Suction & Discharge hoses onto these ports &
tighten using hose clamps
4. Connect the other end of the Discharge Hose with the Delivery Nozzle using hose clamps
5. The pump is now ready for use
6. By simply moving the lever handle up & down, pumping will start in a few strokes. Effort required to
pump varies & is based on the media being pump. Pump is ideally designed for use with low viscosity
media. If used with thick media , effort required will increase
7. After pumping is completed, it is a good practice to open the pump & clean using water. Pump can be
opened by simply turning the lever handle in anti clockwise direction
RECOMMENDED FOR USE WITH:
Aqueous Foods
Acidic Foods with a pH <5
Water
Cider
Fruit or Vegetable Juices
Lemonades , Sodas , Syrups , Bitters
Coffee , Tea
Liquid Chocolate
Beer , Wine , Brandy , Liqueurs
Vegetable Oils
Milk : whole , semi skimmed or skimmed
Vinegar
COMPLIANCE STATEMENT
The pump is manufactured in accordance with the best industry practices & is suitable for contact with
food products, according to the migration test results, on the basis of the requirements established by the
Standards and Directives indicated below:
Ministerial Decree of 21/03/73 and successive updates, acknowledgements of the European Directives,
82/711/EEC, 85/572/ EEC, 89/109/ EEC, 93/8/ EEC, 97/48/EC, 2001/61/EC e 2002/72/EC, regarding
plastic materials and objects destined for contact with food products, in the following terms:
Pump is suitable for contact with foods for which the use of the food
simulants “A” (aqueous foods), “B” (acidic foods having a pH < 4.5/5), “C” (foods with a maximum ethanol
content of 15%) and “D” (fatty foods) is prescribed.
The hose supplied with the pump with accessories is suitable for contact with foods for which the use of
the food simulants “A”, “B” and “C” is prescribed.
The hose supplied with accessories IS NOT SUITABLE for contact with foods for which the use of the
food simulant “D” (fatty foods) is prescribed.
Consequently ,in the case of use of such products (fats) it is necessary to obtain and fit a hose that
complies with the relative legislative prescriptions.
S1370, Rev A
/
