luminii Runda Suspended POA- Dynamic Color Installation guide

Type
Installation guide

This manual is also suitable for

luminii Runda Suspended POA- Dynamic Color:

The luminii Runda Suspended POA- Dynamic Color is a versatile lighting fixture that combines style and functionality. With its power over aircraft design, it offers a unique way to suspend the fixture without the need for additional wiring.

The Runda Suspended POA- Dynamic Color is designed for use in damp locations, making it suitable for both indoor and outdoor applications. It is also compatible with a Class 2 power unit and operates on 24 volts DC, providing safe and efficient operation.

The fixture's head can be rotated up to 140° in either direction, allowing for precise adjustment of the lighting angle. This makes it an excellent choice for illuminating specific areas or creating dramatic lighting effects. Additionally, the Runda Suspended POA- Dynamic Color features a sleek and modern design that complements a variety of décor styles.

luminii Runda Suspended POA- Dynamic Color:

The luminii Runda Suspended POA- Dynamic Color is a versatile lighting fixture that combines style and functionality. With its power over aircraft design, it offers a unique way to suspend the fixture without the need for additional wiring.

The Runda Suspended POA- Dynamic Color is designed for use in damp locations, making it suitable for both indoor and outdoor applications. It is also compatible with a Class 2 power unit and operates on 24 volts DC, providing safe and efficient operation.

The fixture's head can be rotated up to 140° in either direction, allowing for precise adjustment of the lighting angle. This makes it an excellent choice for illuminating specific areas or creating dramatic lighting effects. Additionally, the Runda Suspended POA- Dynamic Color features a sleek and modern design that complements a variety of décor styles.

Page 1 of 2
Runda Suspension with power over aircraft - Installation Instructions
REV0.1 04162019
Please read all instructions prior to installation and keep for future reference!
*LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE
Model: RUN-POA-XX 7777 Merrimac Ave
Niles, IL 60714
T 224.333.6033
F 224.757.7557
www.luminii.com
1. PRODUCT TO BE INSTALLED BY A QUALIFIED
ELECTRICIAN.
2. USE ONLY WITH CLASS 2 POWER UNIT.
3. 24 VOLTS DC.
4. SUITABLE FOR DAMP LOCATIONS.
5. MORE THAN ONE PERSON IS RECOMMENDED FOR THIS
INSTALLATION.
Note: Two junction boxes are required for this installation.
One at each end of the fixture.
Note: More than one person is recommended for this
installation.
1
1.1 Measure the distance from one standoff hub to the other hub.
Then make all the necessary wiring/connections. Reference
page 2 for wiring information.
2
2.1 Slide the aircraft cable end through the crossbar assembly,
canopy, thumb nut & stand off cover . Connect the power supply
low voltage wire to the wire connector. Make sure to snap
connector tab closed to secure wire.
2.2 Line up the crossbar assembly to the junction box, and secure
using the provided screws. Followed by securing canopy to
crossbar with thumb nut.Repeat for the other side of the fixture.
crossbar
assembly
canopy
thumb nut
standoff
cover
wire
connector
screw
crossbar
assembly
canopy
assembly
thumb nut
standoff
cover
2.1
screw 2.2
3
3.1 Push on the standoff hub tab and feed the aircraft cable into the standoff hub until necessary. Release tab to secure in place. Then cut any
excess aircraft, coming out of the standoff hub.
3.2 Slide the standoff cover onto the standoff and thread completely on to secure inplace.
canopy assembly
standoff cover
aircraft cable
standoff
3.1 3.2
measure
standoff hub
fixture
1.1
1.1
fixture
Allen wrench
set screw
fixture
4.1
Please read all instructions prior to installation and keep for future reference!
*LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE
7777 Merrimac Ave
Niles, IL 60714
T 224.333.6033
F 224.757.7557
www.luminii.com
Page 2 of 2
4.1 If necessary fixture head can be slightly rotated by loosening
the inside set screws (highlighted in blue, ) on the end cap if
applicable using a Allen wrench. Make the necessary
adjustments then re-tighten the set screws.
4.1
1. PRODUCT TO BE INSTALLED BY A QUALIFIED
ELECTRICIAN.
2. USE ONLY WITH CLASS 2 POWER UNIT.
3. 24 VOLTS DC.
4. SUITABLE FOR DAMP LOCATIONS.
5. MORE THAN ONE PERSON IS RECOMMENDED FOR THIS
INSTALLATION.
Fixture head rotates up to 140° in either
a up or down direction. Reference ordering code.
4.1
fixture
System Wiring
– low voltage power / suspension wire
+ low voltage power / suspension wire
conduit
remote
power supply
ceiling
+ junction box– junction box controller
wires
input wires
120-277 VAC
conduit
fixture
4
Runda Suspension with power over aircraft - Installation Instructions
Model: RUN-POA-XX
REV0.1 04162019
  • Page 1 1
  • Page 2 2

luminii Runda Suspended POA- Dynamic Color Installation guide

Type
Installation guide
This manual is also suitable for

luminii Runda Suspended POA- Dynamic Color:

The luminii Runda Suspended POA- Dynamic Color is a versatile lighting fixture that combines style and functionality. With its power over aircraft design, it offers a unique way to suspend the fixture without the need for additional wiring.

The Runda Suspended POA- Dynamic Color is designed for use in damp locations, making it suitable for both indoor and outdoor applications. It is also compatible with a Class 2 power unit and operates on 24 volts DC, providing safe and efficient operation.

The fixture's head can be rotated up to 140° in either direction, allowing for precise adjustment of the lighting angle. This makes it an excellent choice for illuminating specific areas or creating dramatic lighting effects. Additionally, the Runda Suspended POA- Dynamic Color features a sleek and modern design that complements a variety of décor styles.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI