2. Home
  3. Domestic appliances
  4. Climate control
  5. Fireplaces
  6. SimpliFire
  7. Built-In Electric Fireplace

SimpliFire Built-In Electric Fireplace Architect Guide

  • Hello! I've reviewed the specification document for the SimpliFire SF-BI30-EB 30" Built-In Electric Fireplace. This document provides detailed information on the unit's dimensions, electrical requirements, clearances, and installation considerations. I'm ready to answer any questions you have about this specific model and its installation needs.
  • What are the electrical connection requirements for the 120V option?
    How should the appliance be installed if it's on a sub-floor?
    What are the minimum clearances to combustibles for the sides of the fireplace?
    What is the size of viewing area?
Specifications SF-BI30
Please consult the manufacturer’s
installation manual for all details and
requirements before making a final
design layout decision.
30" Built-In
Electric Fireplace
3/4" [19]
30" [762]
11" [279]
11-3/4" [298]
3-3/8" [86]
1/2" [13]
26-3/4" [679]
33" [838]
24" [609]
26-1/4" [667]
28-1/4" [711]
22-3/4" [578]
28-3/4" [730]
31" [787]
Side View
Front View
Top View
MODEL
FRONT WIDTH BACK WIDTH HEIGHT DEPTH
VIEWING AREA
Actual Framing Actual Framing Actual Framing* Actual Framing
SF-BI30-EB 31"
[787]
31-3/4"
[787]
24"
[609]
31-3/4"
[787]
26-3/4"
[679]
120V =
27-1/4"[686]
240V =
29-1/4"[737]
11"
[279]
11-5/8"
[295]
28-1/4" x 22-3/4"
[711 x 578]
Electrical
Access
ELECTRICAL CONNECTION REQUIREMENTS
CIRCUIT CONNECTION METHOD BTUS
15 AMP, 120V/60 Hz Hardwire or plug-in 5,000
15 AMP, 240V/60 Hz Hardwire only 10,000
*NOTE: If installing the appliance on a sub-floor, the appliance must be shimmed to
accommodate the finishing flooring thickness and height should increase accordingly.
Specifications
EF/HHT/FS-BI30_0822
PRODUCT LISTING CODES
US CSA 22.2 No 46-M1988
INTERNATIONAL CSA 22.2 No 46-M1988
Product information provided is
not complete and is subject to
change without notice. Product
installation must adhere strictly
to instructions accompanying
product to avoid risk of fire and
potential injury.
SF-BI30
MINIMUM CLEARANCES TO COMBUSTIBLES
APPLIANCE LOCATION
MANTEL PROJECTIONS
FINISHING DIMENSIONS
AREA 120V 240V
SIDES 0" 0"
FLOOR 0" 0"
TOP 0" 2" [51]
BACK 0" 0"
FRONT 36" [914] 36" [914]
33-1/2" [851]
1/2" [13]
1/2"
[13] 23-11/16"
[602]
11-5/8"
[295]
47-5/16"
[1202]
120V = 27-1/4" [686]
240V = 29-1/4" [737]
31-3/4" [787]
NOTE: If installing the appliance on a sub-
oor, the appliance must be shimmed to
accommodate the nishing ooring
thickness. H1 will increase accordingly.
2 in.
2 in.
2 in.
6 in.
12 in.
Measurements from top surface
of the unit.
30" [762]
26-1/4" [667]
C
®
US
SimpliFire — A Brand of Hearth & Home Technologies
7571 215th Street West | Lakeville, MN 55044
888-427-3973 | 952-985-6000 | fireplaces.com
/