HILLS DUCTED VACUUM SYSTEMS S114848 User manual

Brand: HILLS DUCTED VACUUM SYSTEMS

Model: S114848

Type: User manual

Spend your free time on

more important matters

Power Vacuum

Hills Power Vacuum (HPV), 'the heart of the

ducted cleaning system' is constructed only

with quality materials and workmanship,

assuring years of trouble free vacuuming.

CYCLONIC

BAGLESS

S114848

S114848 - POWER UNIT FEATURES

• Injected molded from high

impact, high temperature

ABS polycarbonate and

polypropylene plastics,

• provides greater strength and

durability.

• will not dent and will last a

house time.

• rust and corrosion proof.

• excellent for areas where there

is excessive humidity and ideal

for coastal areas.

•

Right & Left Entry points for

connection of ducting pipe to unit.

• Cyclonic Filtration System utilising

HFPC lter for added motor

protection.

• Also offering Dual Filtration

Compatibility; allowing optional

Disposable Filter bag to be tted

if required with Bag Conversion

Kit.

• Large capacity dirt receptacle

easily emptied by releasing two

clamping latches that provide a

hermetic vacuum seal between

motor base housing and dirt

receptacle.

• Single printed circuit board

control module complete with,

• on/off switch for operating inlet

point on power unit.

• terminals for extra low voltage

remote connections for inlet

points inside house.

• IEC type socket and lead for

power mains connection.

• dual LED technology status

indicators for visual standby

and operating modes.

• Manufactured to meet with

all relevant Electrical Safety

Standards in Australia and

complies with the EMC emission

standard AS/NZS 1044. Power

units are all marked with the

approved marking,

logo, and

registration number N1461.

• Powered by High Efciency

Ametek 2 Stage 145mm Turbine

By-pass Commercial grade

vacuum motor.

• Tangential discharge of outgoing

air allows unit to be tted with

Silencer for added exhaust noise

reduction and allows for venting

to outside for 100% ltration.

For more information on the Hills Power Vacuum solution

08001 HILLS (44557) or hills.co.nz

SPECIFICATIONS

Vacuum Motor Specications

Tangential By-pass discharge

✔

Flow Through discharge

✔

Double ball bearings

✔

Diameter of Motor 143 mm

Air Watts 405 watts

Airow (max.) 50 litres/sec.

Sealed Vacuum H2O (max.) 2,450 mm

RPM @19mm working orice 21200 rpm

Label Rated Electrical Watts 1400 watts

Noise Level with Silencer@ 3m 68.5 dbA

Temperature Sensitive Thermal Protector

✔

Control Circuit 12 V DC

Control Current 100mA

Nominal Voltage 240 V AC

Nominal Frequency 50 Hertz

Power Unit Physical Specications

Overall Height 810 mm

Overall Diameter 310 mm

Overall Weight 6.9 kg

Dual Filtration Compatible System

✔

Cyclonic Filtration (Standard)

✔

HFPC Filter Cartridge

✔

Silencer for Exhaust

✔

Left & Right ducting entry points

✔

Direct Inlet point with On/Off switch

✔

Wall Mounting of Power Unit

✔

Body Housing Construction ABS

Dirt Capacity litres 25

Specications subject to change without notice.

Power Vacuum

S114848

QUALITY

MOTOR INSIDE

145MM

BASE TURBINE

STAGE

FAN

210309 HPV v2

AIR

WATTS

405

MM H20

2,450

ELECTRICAL

WATTS

1,400

VAC MOTOR

RPM

21,200

LITRES/SEC

AIRFLOW

DECIBELS

68.5

ONLY

Hills Limited NZ

YOU CAN RELY ON HILLS

For more information on the Hills Power Vacuum and other best-in-class solutions

08001 HILLS (44557) or hills.co.nz

HILLS DUCTED VACUUM SYSTEMS S114848 User manual

Brand: HILLS DUCTED VACUUM SYSTEMS

Model: S114848

Type: User manual

Download PDF

report

HILLS DUCTED VACUUM SYSTEMS S114848 User manual

HILLS DUCTED VACUUM SYSTEMS S114848 User manual

Related papers

Other documents