Wilson Electronics 460103 Datasheet

Category
Cellular signal boosters
Type
Datasheet

Wilson Electronics 460103 is a cellular signal booster designed to improve signal coverage and quality inside buildings. It supports all U.S. cellular carriers (except Clearwire and U.S. Cellular LTE) and works with all cellular devices. The device amplifies signal throughout an entire home or office, providing reliable voice and data coverage. It has an outdoor antenna that captures the cellular signal and an indoor antenna that rebroadcasts the amplified signal inside the building. The device comes with standard TV (RG-6) coax cable for connecting the antennas.

Wilson Electronics 460103 is a cellular signal booster designed to improve signal coverage and quality inside buildings. It supports all U.S. cellular carriers (except Clearwire and U.S. Cellular LTE) and works with all cellular devices. The device amplifies signal throughout an entire home or office, providing reliable voice and data coverage. It has an outdoor antenna that captures the cellular signal and an indoor antenna that rebroadcasts the amplified signal inside the building. The device comes with standard TV (RG-6) coax cable for connecting the antennas.

¥ #OPYRIGHT s &OR ADDITIONAL INFORMATION CONTACT 7ILSON %LECTRONICS AT  s WWWWILSONELECTRONICSCOM
Make the most of your cellular signal
Boost Your Cell Signal
IN 9OUR (OME OR /FlCE
460103_SS_3-13-14_R09
The Wilson Electronics DB Pro
4G cellular signal booster improves
coverage including 4G, 3G and 2G data downloads for subscribers
of all U.S. cellular carriers (except Clearwire and U.S. Cellular LTE). For
specic information about frequency bands, see below. The DB Pro
4G works with all cellular devices, and supports multiple simultaneous
connections across multiple carriers as well.
The DB Pro 4G will amplify signal throughout an entire home or office,
providing reliable voice and data coverage inside some of todays
energy efficient but cellular unfriendly buildings. Outside antenna
choices include omni-directional or Yagi directional. The inside panel
antenna, which rebroadcasts the amplified cell signal inside the
building, is designed for optional flush mounting in the ceiling or wall.
Components are connected using standard TV (RG-6) coax cable, which
is often pre-wired in buildings. With the DB Pro 4G, you’ll see fewer
dropped calls, faster downloads and a stronger, more reliable cellular
signal indoors. The DB Pro 4G has an MSRP of $549.99.
DB Pro
4G
- Indoor 4G cellular signal
booster kit for the entire home
460103
&2%15%.#9 "!.$ 
700 MHz
"!.$ 
700 MHz
"!.$
850 MHz
"!.$
1700/2100 MHz
"!.$ 
1900 MHz
-!8 '!).
65 dB
0/7%2 2%15)2%-%.43
110-240 V AC, 50-60 Hz, 8 W
#/..%#4/23
F-Female
$)-%.3)/.3
6.5 x 4.25 x 1.75 in / 16.5 x 10.7 x 4.4 cm
7%)'(4
1.28 lbs / 0.580 kg
BENEFITS
UÊ-ÌÀ}iÀÊViÊÃ}>Ê`ÀÃ
UÊiÜiÀÊ`À««i`ÊV>ÃÊEÊÃÌÊViVÌÃ
UÊ>ÃÌiÀÊ`>Ì>Ê`Ü>`Ã
UÊi>ÀiÀÊÛViÊV>Ã
UÊ}iÀÊL>ÌÌiÀÞÊviÊvÀÊViÕ>ÀÊ`iÛViÃ
FEATURES
UÊÊViÀÌwi`ÊÌÊÓä£{ÊÌiVV>Êëi
UÊÊÃÌÃÊÃ}>ÊqÊVÕ`}Ê{ÊqÊvÀÊ>Ê>ÀÊ
U.S. cell carriers (except Clearwire
®
and U.S.
Cellular LTE)
UÊ1°-°L>Ãi`ÊÌiVÊÃÕ««ÀÌÊEÊVÕÃÌiÀÊÃiÀÛVi
UÊÊii`i`ÊV«iÌÃÊVÕ`i`ÊÊ«>V>}i
UÊ9ÊÃÌ>>Ì
  • Page 1 1

Wilson Electronics 460103 Datasheet

Category
Cellular signal boosters
Type
Datasheet

Wilson Electronics 460103 is a cellular signal booster designed to improve signal coverage and quality inside buildings. It supports all U.S. cellular carriers (except Clearwire and U.S. Cellular LTE) and works with all cellular devices. The device amplifies signal throughout an entire home or office, providing reliable voice and data coverage. It has an outdoor antenna that captures the cellular signal and an indoor antenna that rebroadcasts the amplified signal inside the building. The device comes with standard TV (RG-6) coax cable for connecting the antennas.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI