George Kovacs P563-144A User manual

Brand
George Kovacs
Model
P563-144A
Type
User manual

George Kovacs P563-144A is an elegantly designed lighting fixture compatible with two 40w T10 light bulbs to provide ample illumination. Its sturdy construction ensures durability, while its stylish appearance enhances the aesthetics of any space. Installation requires basic electrical knowledge, and the provided instructions guide you through the process of mounting the fixture, connecting the wires, and assembling the components. The detailed diagram included in the manual ensures a proper and safe installation. Enjoy the ambiance created by this beautiful and functional lighting solution.

George Kovacs P563-144A is an elegantly designed lighting fixture compatible with two 40w T10 light bulbs to provide ample illumination. Its sturdy construction ensures durability, while its stylish appearance enhances the aesthetics of any space. Installation requires basic electrical knowledge, and the provided instructions guide you through the process of mounting the fixture, connecting the wires, and assembling the components. The detailed diagram included in the manual ensures a proper and safe installation. Enjoy the ambiance created by this beautiful and functional lighting solution.

INSTALLATION INSTRUCTIONS
Item#P563-144A
READ AND SAVE THESE INSTRUCTIONS
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
Fig. 1
WARNING
Risk of shock, do not supply power to
fixture before assembly is complete.
Do not exceed the maximum wattage
rating
MOUNTING INSTRUCTIONS
1. Shut off power at the circuit breaker and remove
the old fixture and Mounting Hardware.
2. Carefully unpack your new fixture and lay out all
the parts on a clear area. Take care not to lose
any small parts necessary for installation.
3. Fasten the threaded rod (A) into the center hole
of Crossbar (C).
4. Secure Crossbar (C) using Screws (B) to the
Outlet Box. The side of the Crossbar marked
“GND” must face out.
CONNECTING THE WIRES (Fig. 1)
5. Connect the electrical wires as shown in Fig. 1,
making sure that all wire connectors (D) are
secured. If your outlet has a ground wire (green
or bare copper), connect the fixture’s Ground
Wire to it. Otherwise, connect the fixture’s
Ground Wire directly to the Circular Strap or
Reinforcement Plate using the Green Screw
provided.
FINISHING THE INSTALLATION
6. Place fixture body (F) onto threaded rod (A) and
secure it tightly using Cap Nut (G).
7. Install 2*40w T10 Light Bulbs in accordance with
the lamp’s specifications. (DO NOT EXCEED
THE MAXIMUM WATTAGE RATING!). (NE PAS
DEPASSER LA PUISSANCE NOMINALE
MAXIMALE!)
8. Place glass (H) onto decorative plate (I). Fasten
glass (H) to decorative plate (I) with cap nuts (J).
9. Fasten (H) & (I) to fixture body (F) using screws
(E). Be careful not to over tighten.
Your installation is now complete. Return power
and test the fixture.
Note: Illustration (Fig.1) on this manual is for
installation purposes only. It may or may not be
identical to the fixture purchased.
***Caution, to avoid being burned, wait for
the fixture to cool, prior to replacing the
light bulbs. ***
FIXTURE
WIRES
Black or
Smooth
HOUSE
WIRES
Black
(Hot)
FIXTURE
WIRES
White or
Ribbed
HOUSE
WIRES
White
(Neutral)
FIXTURE
WIRES
Bare
Copper
(Ground)
HOUSE
WIRES
Green
(Ground)
IMPORTANT: FIXTURE SHOULD BE INSTALLED BY
A QUALIFIED ELECTRICIAN TO ENSURE PROPER
WIRING AND INSTALLATION.
  • Page 1 1

George Kovacs P563-144A User manual

Brand
George Kovacs
Model
P563-144A
Type
User manual

George Kovacs P563-144A is an elegantly designed lighting fixture compatible with two 40w T10 light bulbs to provide ample illumination. Its sturdy construction ensures durability, while its stylish appearance enhances the aesthetics of any space. Installation requires basic electrical knowledge, and the provided instructions guide you through the process of mounting the fixture, connecting the wires, and assembling the components. The detailed diagram included in the manual ensures a proper and safe installation. Enjoy the ambiance created by this beautiful and functional lighting solution.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents