Vidonn X5 Owner's manual

Category
Pedometers
Type
Owner's manual

This manual is also suitable for

VIDONN Smart Bracelet Manual
Model: X5
Thanks for your choosing on Vidonn Smart bluetooth Bracelet which own
advanced design and technology skills, provide more better help also enjoy for
your health and sports to create more comfortable life for you.
Copyright
Reserved,protected,final interpretation right by ShenZhen Vidonn Sports Information
Technology Co., Ltd. Cannt be copy or distribution without our permittion
Packaging
Pedometer HostWrist bandclaspManual
Instruction
Insert USB stick of the host device into wrist band, then lock the clasp(as shown);all Wrist
band can be adjustable according to actual requirement.
Assemble the host device
Insert the host along the arrows Press button to lock with the wrist strap
Disassemble the host device
Bend wrist band along arrows take out host along arrows
Charge it when the first time.
Plug pedometer into PC or power bank USB port for charge, around 15 minutes; also use
charger to charge, the charge must be: 5V, 300mA standard charge
Synchronous data
I-phone and android device
The mobile device can be sync with Vidonn Smart(must be Bluetooth 4.0):
iPhone 4S, 5, 5S,iPod touch5, etc.(OS must be IOS6.0 or later)
Samsung S4Note3,etc. (OS must be Android4.3 or later).
Go to App store, download this APK: “vidonn” then install. Open APK vidonn to make sure
your mobile device connect with internet via wifi or 3G.
Account set up : Login if have an account,or register a new account(As picture 1).
Binding: System shows “search wristband” or “I don’t have bracelet after login.,Please
press key to activate the wristband,make sure the display is on,then click “search
wristband”,after 30~60 sec smart bracelet will show a pairing code(4 figures),after several
sec,your mobile device will show a dialog box to request input a code,input the pairing
code(4 figures) and click “finish”.(As picture 2).If you didn’t find pairing code after 60 sec,
repeat this step.
Input personal information: GenderWeightAgeHeight,click “finish”,then the system
will analyze your data based on these information at the first.
The system will go to “personal”,please press key on the host again utill the step data in
the APK is same as step data in the wristband display,now you finished binding.If you
want to binding with other wristband,click “setting”--“My wristband”--“Cancel banding”.(As
picture 3)
picture 1 picture 2 picture 3
Synchronize data with PC
Visit www.vidonn.com to download the computer
synchronization software in "Download Centre"Can be adaptable Windows XP, Vista, 7 +
Install synchronization software according to the type of clients’computer.
Insert X5 host to the computer's USB port.
Login the account, first click Rigister”if don’t have account then login.
The host will vibrate alert if connect successfully, and window shows "connect bracelet s
uccessfully", however it shows "not found bracelet". So please check connection is good
or not with the computer, or re-plug.
Click "Sync Data", then information of bracelet will be synchronized to the server,. And u
sers can login their accounts to see home page or refresh the page to see
Pls enter personal information such as gender, weight, age, height at the first time, then c
lick "Finish", and the system will match the calories, distance and other data according to
above information
Instruction of using
Long press the key for 3 sec, the wristband will pass into “sleeping” or “temporary
mode.long press the key 3 sec again to transfer back to normal mode.
Normal mode Icon: Step number; Time; Calory; Alarm clock.
Temporary mode Icon: Step number; Distance; Time; Calory.
Charge: Insert the wristband host into PC or power bank USB port directly, charge time
around 15 minutes; charger must be standard good quality charge at this spec : 5V --300mA.
LED light is keep on, double click the key to turn on or off
Alarm clock setting: reminding via vibration
Mobile side: clickmore” -- “my bracelet”-- “Alarm clock setting”
PC side: Use the sync software, click “configurate” to set.
Sleeping mode setting:
Mobile side: clickmore” -- “my bracelet”-- “Sleeping setting”
PC side: Login our website, click “setting” -- sleeping time”.
The bracelet will detect data automatically upon the sleeping time user set.
Remark: if the APP hang,that’s because the internet is not so good, please exit APP, connect
phone with internet, then press key to open the wristband host, and open APP, the wristband
will connect and pair with device automatically .
Warning
Waterproof so you can wear it when washing but without showering
The bracelet or accessories out of the reach of children and pets on location
.
Please keep the bracelet in a dry environment. three standard (IP67) in the bracelet,only for
water, such as the usual hand washing, rain wet
Avoid high temperature or cold to store bracelet .
Rudely use may damage the internal circuit boards , use within three standard anti-
Do not use chemicals, detergent or hand washing detergent concentration greater ring .
Do not put your hands around the ring heating equipment .
If the bracelet has a flash or light , do not get too close to the eyes of people or animals
use flash or lights . Otherwise, you may damage your eyes.
If the bracelet , battery, charger or any accessory is not working properly, please bring
bracelet to the nearest qualified service department to check them,of course revise is ok if
necessary
1 / 1

Vidonn X5 Owner's manual

Category
Pedometers
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Ask the document