Vidonn Smartband X5 Owner's manual

Brand: Vidonn

Model: Smartband X5

Category: Pedometers

Type: Owner's manual

This manual is also suitable for

VIDONN Smart Bracelet Manual

Model: X5

Thanks for your choosing on Vidonn Smart bluetooth Bracelet which own

advanced design and technology skills, provide more better help also enjoy for

your health and sports to create more comfortable life for you.

Reserved,protected,final interpretation right by ShenZhen Vidonn Sports Information

Technology Co., Ltd. Cann’t be copy or distribution without our permittion

Packaging

Pedometer Host、Wrist band、clasp、Manual

Instruction

Insert USB stick of the host device into wrist band, then lock the clasp(as shown);all Wrist

band can be adjustable according to actual requirement.

●Assemble the host device

Insert the host along the arrows Press button to lock with the wrist strap

●Disassemble the host device

Bend wrist band along arrows take out host along arrows

●Charge it when the first time.

Plug pedometer into PC or power bank USB port for charge, around 15 minutes; also use

charger to charge, the charge must be: 5V, 300mA standard charge

Synchronous data

●I-phone and android device

The mobile device can be sync with Vidonn Smart(must be Bluetooth 4.0):

iPhone 4S, 5, 5S,iPod touch5, etc.(OS must be IOS6.0 or later)；

Samsung S4、Note3,etc. (OS must be Android4.3 or later).

 Go to App store, download this APK: “vidonn” then install. Open APK vidonn to make sure

your mobile device connect with internet via wifi or 3G.

 Account set up : Login if have an account,or register a new account(As picture 1).

 Binding: System shows “search wristband” or “I don’t have bracelet ” after login.,Please

press key to activate the wristband,make sure the display is on,then click “search

wristband”,after 30~60 sec smart bracelet will show a pairing code(4 figures),after several

sec,your mobile device will show a dialog box to request input a code,input the pairing

code(4 figures) and click “finish”.(As picture 2).If you didn’t find pairing code after 60 sec,

repeat this step.

 Input personal information: Gender、Weight、Age、Height,click “finish”,then the system

will analyze your data based on these information at the first.

 The system will go to “personal”,please press key on the host again utill the step data in

the APK is same as step data in the wristband display,now you finished binding.If you

want to binding with other wristband,click “setting”--“My wristband”--“Cancel banding”.(As

picture 3)

picture 1 picture 2 picture 3

Synchronize data with PC

Visit www.vidonn.com to download the computer

synchronization software in "Download Centre"Can be adaptable Windows XP, Vista, 7 +

 Install synchronization software according to the type of clients’computer.

 Insert X5 host to the computer's USB port.

 Login the account, first click “Rigister”if don’t have account then login.

 The host will vibrate alert if connect successfully, and window shows "connect bracelet s

uccessfully", however it shows "not found bracelet". So please check connection is good

or not with the computer, or re-plug.

 Click "Sync Data", then information of bracelet will be synchronized to the server,. And u

sers can login their accounts to see home page or refresh the page to see

 Pls enter personal information such as gender, weight, age, height at the first time, then c

lick "Finish", and the system will match the calories, distance and other data according to

above information

Instruction of using

●Long press the key for 3 sec, the wristband will pass into “sleeping” or “temporary”

mode.long press the key 3 sec again to transfer back to normal mode.

Normal mode Icon: Step number; Time; Calory; Alarm clock.

Temporary mode Icon: Step number; Distance; Time; Calory.

●Charge: Insert the wristband host into PC or power bank USB port directly, charge time

around 15 minutes; charger must be standard good quality charge at this spec : 5V --300mA.

●LED light is keep on, double click the key to turn on or off；

●Alarm clock setting: reminding via vibration

Mobile side: click “more” -- “my bracelet”-- “Alarm clock setting”

PC side: Use the sync software, click “configurate” to set.

●Sleeping mode setting:

Mobile side: click “more” -- “my bracelet”-- “Sleeping setting”

PC side: Login our website, click “setting” -- “sleeping time”.

●The bracelet will detect data automatically upon the sleeping time user set.

Remark: if the APP hang,that’s because the internet is not so good, please exit APP, connect

phone with internet, then press key to open the wristband host, and open APP, the wristband

will connect and pair with device automatically .

Warning

Waterproof so you can wear it when washing but without showering

●The bracelet or accessories out of the reach of children and pets on location

●Please keep the bracelet in a dry environment. three standard (IP67) in the bracelet,only for

water, such as the usual hand washing, rain wet

●Avoid high temperature or cold to store bracelet .

●Rudely use may damage the internal circuit boards , use within three standard anti-

●Do not use chemicals, detergent or hand washing detergent concentration greater ring .

●Do not put your hands around the ring heating equipment .

●If the bracelet has a flash or light , do not get too close to the eyes of people or animals

●use flash or lights . Otherwise, you may damage your eyes.

●If the bracelet , battery, charger or any accessory is not working properly, please bring

bracelet to the nearest qualified service department to check them,of course revise is ok if

necessary

Vidonn Smartband X5 Owner's manual

Brand: Vidonn

Model: Smartband X5

Category: Pedometers

Type: Owner's manual

This manual is also suitable for

Download PDF

report

Vidonn Smartband X5 Owner's manual

This manual is also suitable for

Vidonn Smartband X5 Owner's manual

Other documents