Kemper FROSTI-PLUS Installation guide

Kemper
Brand
Kemper
Model
FROSTI-PLUS
Type
Installation guide
Installation and Operating Manual
Final installation FROSTI
®
-PLUS | Fig. 574 11
i
!
2 / 12 – K410057401011-00 / 04.2018 – © www.kemper-olpe.de
EN Precautions
for installation, maintenance and operation
Use
The KEMPER FROSTI®-PLUS is used as
a frost-proof outdoor tap.
Do not use the product for other
purposes than described above.
Any other uses constitute misuse.
Warnings
Be sure to read and follow the warn-
ings in the manual. Failing to do so
can lead to personal injury or material
damage!
Important warnings:
Warning! Highlights risks
that may result in injury, ma-
terial damage or contamination
of drinking water.
Note! Highlights risks that
may result in damage to the
plant or dysfunction.
Important advice to the operator
Medium: water
maximum operating temperature 90 °C,
pressure rating PN 16
1. The valve should only be used
- in good order and condition
- as intended
2. During periods prone to frost,
always separate the hose and
all screw connections from
the tap.
Maintenance
In accordance with BS EN 806-5, main-
tenance is to be carried out on the tap
annually.
Be sure to comply with the local
regulations on waste recycling
and disposal.
Installation and operation
Read the manual and follow the
instructions before installation.
Installation and maintenance must be
carried out by qualified plumbers.
Provide manual to the plant operator
and keep on hand for further reference!
The place of installation may not be at
risk of flooding.
Perform a leak test after installation
and before commissioning!
Priority must be given to the national
standards and provisions on sanitary
installations and accident prevention.
All dimension specifications are given
in mm.
Warranty
No warranty in case of:
- Non-compliance with the manual.
- Damage due to incorrect installation.
- Unauthorised modification of the product.
i
!
3 / 12 – K410057401011-00 / 04.2018 – © www.kemper-olpe.de
!
EN Installation and Operating Manual
Frost-proof outdoor tap
FROSTI
®
| Fig. 577 11
Fig. 574 11
BS EN 1717
BS EN 806
+
www.kemper-olpe.de
FROSTI®
DE Nur leichtes Zudrehen
erforderlich, 10 Sekunden
Wasserablauf sind in Ordnung
EN Turn only lightly to close,
10 seconds water expiration is all right
NL Slechts licht afsluiten, het water kan nog
10 seconde doorlopen
FR Fermer la robinet sans eort, l´eau coule
encore pendant, 10 secondes
CS Stačí jen lehké otočení,
po 10 vteřina odtoku vody v pořádku
i
4 / 12 – K410057401011-00 / 04.2018 – © www.kemper-olpe.de
2
9
8
75
1
10
6
3
4
i
Item Designation Art.-No.
1-3 FROSTI® socket key operated
handle
5740100100
4 head part
5 breather
6 hose coupling
E010557401015KP
E21055730000100
Z21005741601500
7
(including 5)
FROSTI® valve body incl.
aerator
5741201500
8 collar L41055740301500
9 PE gasket C31005740000100
10+3 socket key for FROSTI®5740000100
Not
illustrated
mounting kit for
FROSTI®-PLUS
5740000500
Not
illustrated
extension for
FROSTI®-PLUS
5740000200
Not
illustrated
lockable handle for
FROSTI®
5750000300
Not
illustrated
dismantling key for lockable
handle
5750100300
5 / 12 – K410057401011-00 / 04.2018 – © www.kemper-olpe.de
max.
min. 250**
min. 100**
DN
Drinking water installation
In order to prevent stagnation and bacterial contamination
in the supply, it is recommended to loop the tap in
the drinking water system.
* For technical and hygienic reasons, it is necessary to
install cute the last min. 100 mm and max. 10 x DN as a
functional individual supply line.
** The tap must be installed at least 250 mm above
the maximum fluid level.
Warning! The FROSTI must be installed in accor-
dance to Water Regulations, schedule 2, paragraph
15. The level of protection must be appropriate to
the fluid category.
BS EN 1717
6 / 12 – K410057401011-00 / 04.2018 – © www.kemper-olpe.de
!
21
2.
3.
1.
1.
2.
7 / 12 – K410057401011-00 / 04.2018 – © www.kemper-olpe.de
!
1.
2.
43
1.
2.
8 / 12 – K410057401011-00 / 04.2018 – © www.kemper-olpe.de
~ 10 sec.
i
i
6
5
7
2. 3.
1.
1.
2.
1.
2.
9 / 12 – K410057401011-00 / 04.2018 – © www.kemper-olpe.de
9
8
1.
3.
2.
1.
2.
10 / 12 – K410057401011-00 / 04.2018 – © www.kemper-olpe.de
1210
1311
1.
2.
11 / 12 – K410057401011-00 / 04.2018 – © www.kemper-olpe.de
1514
1.
2.
2.
A C
B
1.
2.
3.
12 / 12 – K410057401011-00 / 04.2018 – © www.kemper-olpe.de
FROSTI
®
ččení,
řřádku
i
i
i
K410057401011-00 / 04.2018
Kemper UK & Ireland Ltd.
2 Ripple Court Brockeridge business park
Twyning
Tewkesbury
Glos, GL20 6FG
Phone +44 16 84 - 85 49 30
Fax +44 16 84 - 85 49 31
www.kemper-uk.com
[email protected]
+
Fig. 575 00 003
+
!
16
1.
3.
5.
6.
4.
2.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Kemper FROSTI-PLUS Installation guide

Kemper
Brand
Kemper
Model
FROSTI-PLUS
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents