Digitus IPcam Viewer Quick Installation Guide (iOS)
Digitus IPcam Viewer is the APP for Mobile devices to connect to Digitus IP Cameras (DN-16026 &
DN-16035) to have live-view anytime anywhere.
This APP is available at APP Store
How to Setup:
1. Go to APP store
2. Search for “Digitus IPcam Viewer”, you will find illustration
3. You will find Digitus Camera Viewer with icon
4. Download & Install the APP
5. Execute the APP on your mobile devices
6. If the cameras are in the same LAN of the mobile devices, then press “Add”. The APP will
auto-scan and add the cameras.
7. If the cameras are connected to the Internet, then you can manually key in the IP addresses and
port number.
8. For DN-16035 (Pan & Tilt camera), you can control the P & T through smart phone access as
well.
Example:
The IP address: 60.250.182.254
Port: 6001
User name: admin
Password: 1234
Press the “Switch” icon to become
“Gesture” and you can move the
viewing direction by sliding on the
screen of the mobile device.
-
1
-
2
Digitus DN-16035 Quick start guide
- Type
- Quick start guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
ASSMANN Electronic AK-330105-200-S Datasheet
-
Foscam FI8905W User manual
-
Maginon IPC-1A User manual
-
Geovision GV-NVR System Lite User manual
-
-
-
-
Foscam FI9805P User manual
-
-
Ebode IPV68P2P User manual