2. JasonL
  3. JR3121207WT

JasonL JR3121207WT Operating instructions

  • Hello! I've reviewed the Assembly Instructions for the Just Right 3P 120 Degree Workstation. This document provides a step-by-step guide on how to assemble the desks and incorporate the dividing screens, including use of an allen key and a 120 degree connector. I'm ready to answer any questions you might have about the assembly process or the workstation itself.
  • What tools are required for the assembly?
    How many people are needed for the installation?
    What is the first assembly step?
    What is used to assemble screens?
Page 1 of 9
ASSEMBLY INSTRUCTIONS
Just Right 3P
120 Degree Workstation
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Tools Required: Power screwdriver; Allen key set (provided)
2 persons required for installation
Page 2 of 9
ASSEMBLY INSTRUCTIONS
Just Right 3P
120 Degree Workstation
Need help!
Call us on
1300 527 665
www.jasonl.com.au
The first step is to assemble the desks
individually. The following steps contain in
detail the parts and processes to follow,
for each of them.
Page 3 of 9
ASSEMBLY INSTRUCTIONS
Just Right 3P
120 Degree Workstation
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Page 4 of 9
ASSEMBLY INSTRUCTIONS
Just Right 3P
120 Degree Workstation
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Page 5 of 9
ASSEMBLY INSTRUCTIONS
Just Right 3P
120 Degree Workstation
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Page 6 of 9
ASSEMBLY INSTRUCTIONS
Just Right 3P
120 Degree Workstation
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Page 7 of 9
ASSEMBLY INSTRUCTIONS
Just Right 3P
120 Degree Workstation
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Page 8 of 9
ASSEMBLY INSTRUCTIONS
Just Right 3P
120 Degree Workstation
Need help!
Call us on
1300 527 665
www.jasonl.com.au
With the desks
assembled, we can
proceed now to include
the dividing screens.
ASSEMBLY INSTRUCTIONS
Just Right 3P
120 Degree Workstation
Need help!
Call us on
1300 527 665
www.jasonl.com.au
STEP 01
Using an allen key, please remove 3 caps from all screens.
STEP 02
Page 9 of 9
Put the three screens in position. Bring 3 partitions towards one another
and slide the 3-way 120 degree connector -down between the three
screen uprights. Put the 3 caps back in their original position.
/