The teko Astra-713 is a control panel designed to protect facilities from unauthorized intrusion and fires in stand-alone mode, under the control of an Astra-Dozor control panel, or under the control of an Astra-Z-8945 control panel. In stand-alone mode, the device will monitor the state of 8 (eight) alarm loops with activated intrusion or fire detectors and output notifications via relay outputs, to alerting equipment via “open collector” outputs, and to a built-in buzzer. When controlled by an Astra-Dozor or Astra-Z-8945 control panel, the device will monitor the state of 8 (eight) alarm loops with activated intrusion or fire detectors and transmit notifications and TM key codes to the control panel via an RS-485 interface, and also control relay and OC outputs in response to control panel commands.
The teko Astra-713 is a control panel designed to protect facilities from unauthorized intrusion and fires in stand-alone mode, under the control of an Astra-Dozor control panel, or under the control of an Astra-Z-8945 control panel. In stand-alone mode, the device will monitor the state of 8 (eight) alarm loops with activated intrusion or fire detectors and output notifications via relay outputs, to alerting equipment via “open collector” outputs, and to a built-in buzzer. When controlled by an Astra-Dozor or Astra-Z-8945 control panel, the device will monitor the state of 8 (eight) alarm loops with activated intrusion or fire detectors and transmit notifications and TM key codes to the control panel via an RS-485 interface, and also control relay and OC outputs in response to control panel commands.
The teko Astra-713 is a control panel designed to protect facilities from unauthorized intrusion and fires in stand-alone mode, under the control of an Astra-Dozor control panel, or under the control of an Astra-Z-8945 control panel. In stand-alone mode, the device will monitor the state of 8 (eight) alarm loops with activated intrusion or fire detectors and output notifications via relay outputs, to alerting equipment via “open collector” outputs, and to a built-in buzzer. When controlled by an Astra-Dozor or Astra-Z-8945 control panel, the device will monitor the state of 8 (eight) alarm loops with activated intrusion or fire detectors and transmit notifications and TM key codes to the control panel via an RS-485 interface, and also control relay and OC outputs in response to control panel commands.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI