Features
•
Compression molded from Sterling’s exclusive solid
Vikrell
®
material
•
Gentle sloping back, neck, and armrest in bath
design
•
Bath and integral apron eliminates installation step
•
Lightly pebbled bottom surface for sure footing
•
Tongue-and-groove ″snap together″ design
•
Durable high gloss finish
•
10 year consumer/3 year commercial limited warranty
•
16″ (40.6 cm) bath depth (floor to top of dam)
•
3″ (7.6 cm) wainscot/tile ledge
•
60″ (152.4 cm) x 43-1/2″ (110.5 cm) x 73-1/4″
(186.1 cm) complete unit rough-in dimensions include
flanges
•
60″ (152.4 cm) x 42″ (106.7 cm) x 72″ (182.9 cm)
complete unit finished dimensions
Codes/Standards Applicable
Specified model meets or exceeds the following:
•
ASTM E162
•
ASTM E662
•
ANSI Z124.1.2
•
IAPMO/UPC
•
HUD, UM Bulletin 73A
•
NAHB Research Foundation, Inc.
42″ (106.7 cm) OVAL BATH/SHOWER
SYSTEM
71110110
ALSO 71110120
Colors/Finishes
•
0: White
•
Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Complete Unit Description Colors/Finishes
71110110 42″ (106.7 cm) oval bath and wall surround, left drain ❑ 0 ❑ Other_____
71110120 42″ (106.7 cm) oval bath and wall surround, right drain ❑ 0 ❑ Other_____
71110310 42″ (106.7 cm) oval bath and wall surround, 3 pack, left drain ❑ 0 ❑ Other_____
71110320 42″ (106.7 cm) oval bath and wall surround, 3 pack, right drain ❑ 0 ❑ Other_____
Model Wall Component Description Colors/Finishes
71112100 Back wall ❑ 0 ❑ Other_____
71113110 Left end wall ❑ 0 ❑ Other_____
71113120 Right end wall ❑ 0 ❑ Other_____
71114100 Complete wall set ❑ 0 ❑ Other_____
71115100 End wall set ❑ 0 ❑ Other_____
ENSEMBLETM
SterlingPlumbing.com
Visit us online for fixture color choices, detailed product information, color photos, installation instructions, care
guides, and warranties. Sterling offers additional lines of plumbing products to complement the Sterling product
you’ve chosen. Sign up for the Sterling monthly e-newsletter which showcases our latest product innovations. You
may also call our Sterling Plumbing Answer Center from within the USA at 1-888-STERLING in addition to
consulting with your local dealer. Sterling. Strong. Professional. Design.
Page 1 of 2
1020185-4-
E
Technical Information
Fixture*: basin area top area
Bathing well 40″ (101.6 cm) x
27″ (68.6 cm)
52″ (132.1 cm) x
35″ (88.9 cm)
To overflow water depth capacity
11″ (27.9 cm) 55 gal (208.2 L)
* Approximate measurements for comparison only.
Model door maximum
width
door maximum
height
71110110
71110120
58-1/2″ (148.6 cm) 56″ (142.2 cm)
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
Stud positioning is critical.
Studs should be positioned roughly as shown for support clip
or roofing nail installation.
3-1/2" (8.9 cm)
43-1/2"
(110.5 cm)
6" (15.2 cm)
(Typical)
14"
(35.6 cm)
14"
(35.6 cm)
16"
(40.6 cm)
27-1/2"
(69.9 cm)
8"
(20.3 cm)
4"
(10.2 cm)
8-3/4"
(22.2 cm)
20-1/4"
(51.4 cm)
11-1/2"
(29.2 cm)
60" (152.4 cm) Min
60-1/8" (152.7 cm) Max
20"
(50.8 cm)
19"
(48.3 cm)
16"
(40.6 cm)
60" (152.4 cm)
73-1/4"
(186.1 cm)
53"
(134.6 cm)
30" (76.2 cm)
1-1/2" (3.8 cm)
Recommended Support
Clip or Roofing Nail
Location (5 Total)
43-1/2"
(110.5 cm)
42"
(106.7 cm)
2" (5.1 cm) D. Drain
Drain Cutout
71110120
1-1/4"
(3.2 cm)
3"
(7.6 cm)
3-1/8" (7.9 cm)
Overflow
Detail
Product Diagram
ENSEMBLETM
ENSEMBLETM 42″ (106.7 cm) OVAL BATH/SHOWER SYSTEM
Page2of2
1020185-4-
E
Features
•
CleanCoat
TM glass coating
•
Heavy-duty, anodized aluminum-framed glass doors
•
Out-of-plumb adjustability allows for easy installation
•
Aluminum components extruded from alloy 6063-T5
•
Reversible top track can be installed with either the
round or flat side facing out
•
Stainless steel hardware prevents rusting or corrosion
•
1/4″ (6 mm) thick tempered glass
•
Two through-the-glass towel bars, located both inside
and outside, enhance appearance and usability
•
Frameless design highlights bathing area
Codes/Standards Applicable
Specified model meets or exceeds the following:
•
ANSI Z97.1 (tempered glass)
•
16 CFR Part 1201
FRAMELESS BYPASS BATH/
SHOWER DOOR
5400 Series
Colors/Finishes
•
Refer to the Price Book for current frame finish and glass
options
Specified Model
Model A (Max Width)* B (Height)* C (Walk Through Max)*
5405-59** 59-5/8″ (151.4 cm) 58-1/16″ (147.5 cm) 27-7/8″ (70.8 cm)
5425-57** 57″ (144.8 cm) 55-1/2″ (141 cm) 26-5/8″ (67.6 cm)
5425-59** 59-5/8″ (151.4 cm) 55-1/2″ (141 cm) 27-7/8″ (70.8 cm)
5475-48** 47-5/8″ (121 cm) 70-1/16″ (178 cm) 21-7/8″ (55.6 cm)
5475-59** 59-5/8″ (151.4 cm) 70-1/16″ (178 cm) 27-7/8″ (70.8 cm)
* Note: Consult the diagram on the next page for the location of the measurements.
** Note: Add appropriate frame color/finish code to the end of the unit model # when ordering.
FINESSETM
Page 1 of 2
1058857-4-
F
For more information
visit SterlingPlumbing.com
or call 1-800-STERLING
C
B
A
1-7/8"
(4.8 cm)
2-1/2"
(6.4 cm)
2-1/2"
(6.4 cm)
2"
(5.1 cm)
1-7/8"
(4.8 cm)
Product Diagram
FINESSETM
FINESSETM FRAMELESS BYPASS BATH/ SHOWER DOOR
Page2of2
1058857-4-
F
/
