2. Husky
  3. 80-538-111

Husky 80-538-111 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Husky 80-538-111 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
WARNING
This warranty excludes incidental/inconsequential damages
and failures due to misuse, abuse, normal wear and tear and
dulling of the blade(s).
Specifications
• Use to join like-size copper tubing and eliminate the need to use couplings
• Swages 3/16 in., 1/4 in., 5/16 in., 3/8 in., 1/2 in. and 5/8 in. O.D. tubing
• Requires hammer for use
• Durable, hardened steel construction for a long-lasting use
Product Overview
Husky's Swaging Tool joins like-size copper tubing and eliminates the need
for couplings. It has 6 swaging size capabilities from 3/16 in. to 5/8 in. diameter.
It features a hardened steel construction for long-lasting durability.
Operating Instructions
If you have any question concerning this product:
– Contact your local Homedepot Store.
– Contact 1-888-HD-HUSKY.
Instruction Sheet
6-in-1 Steel Swaging
Punch Tool
Read all instruction caredully before using
1. Insert swaging tool into one end of copper tubing until snug.
2. Strike base of swaging tool with hammer until tube forms
around expansion section of tool.
3. to solder joint, follow instructions provided
by manufacturer of solder flux.
Tool needed for use: Hammer
/