Moldex 5210 User manual

Brand: Moldex

Model: 5210

Type: User manual

This manual is also suitable for

5230

1 83325 00020 4

Dries Clear!

Water Resistant Sealer

Resists Mold & Mildew Stains on

the Surface of the Dried Coating Film

BATHROOM

SIDING

FURNITURE

Easy to Apply

Water-based

Dries Fast

Biodegradable

Resists Moisture

For Most Surfaces

32 oz. (0.946 liters) Made in USA

FRONT BACK

BOTTLE ARTWORK

32OZ SEALANT TRIGGER

OUTSIDE BOTTLE

ARTWORK

APPLICATIONS: Patio Furniture, Awnings, Shower curtains, Walls, Tile, Grout, Plastic

Previously-painted surfaces, Basement, Window frames, Sealed wood, Drywall, Siding,

Shingles, Tarps, Tents, Canvas, Boat & R.V. tops, Fabric, Vinyl, Brick & Ceramic.

DIRECTIONS FOR USE:

1. Surface area should be clean and free of Mold before applying this product.

2. Test a small inconspicuous area and let dry. Check for unwanted visual change.

3. Spray surface liberally and evenly. For smooth surfaces, wipe with cloth damped with Moldex Sealant.

4. Remove over spray before it dries with water dampened cloth.

5. Allow to dry (30 minutes - 1 hour).

6. Re-apply as needed. *Effective life depends on abrasion and exposures.

EnviroCare Corporation

10 Upton Drive

Wilmington, MA. 01887

Toll-Free: 1-877-463-2628

www.envirocarecorp.com

PRECAUTIONS: Avoid prolonged eye and skin contact. Prevent overspray on plants and glass. Contains water, acrylic

copolymer and proprietary ingredients.

STORAGE: Keep from freezing.

FIRST AID: Eye Contact: Flush eyes with water. SKIN CONTACT: Wash affected areas with soap and water. INHALATION: If

symptoms develop, move person to fresh air. IF SWALLOWED: Do not induce vomiting unless instructed to do so by medical

personnel. Give 2 glasses of water. Seek medical attention.

KEEP OUT OF REACH OF CHILDREN

REV: 01/13

1

Moldex 5210 User manual

Brand: Moldex

Model: 5210

Type: User manual

This manual is also suitable for

5230

Download PDF

Related papers

Other documents