[www.moldexbrands.com]
TM
Envirocare Corporation
260 Fordham Rd
Wilmington, MA 01887
Toll Free. 1-877-463-2628
www.envirocarecorp.com
.DISINFECTANT.
.PROTECTANT.
PROFESSIONAL GRADE
MOLD & MILDEW SOLUTIONS
Clean & Seal
© 2008 EnviroCare Corporation
TM
TM
TM
.MOLDEX BRANDS.
Targeting Mold the Right Way
ENvIROcARE, ThE MAkERS OF MOL-
DEx, UNDERSTANDS hOW PREcIOUS
yOUR FAMILy IS AND hOW IMPORTANT
ThE ENvIRONMENT IS TODAy. TO EN
-
SURE yOU ARE GETTING ThE RIGhT
PRODUcTS, ALL OUR DISINFEcTANTS
WERE APPROvED by ThE ENvIRON
-
MENTAL PROTEcTION AGENcy.
AccORDING TO ThE EPA, “MOLDS
cAN bE FOUND ALMOST ANy
-
WhERE AND cAN GROW ON vIRTU
-
ALLy ANy SUbSTANcE, PROvIDING
MOISTURE IS PRESENT.” MOLDEx
PROTEcTANT WAS DESIGNED TO
RESIST MOISTURE AND cREATE AN
INvISIbLE MOLD-PROOF bARRIER.
THE MOLDEX PROMISE... ACCORDING TO THE EPA...
64 oz - Concentrate
(makes 16 gallons)
1 Gallon
(Ready To Use)
32 oz Trigger Spray
32 oz Trigger Spray
32 oz Hose End Spray
(coverage up to 3,000sq.ft)
Moldex® Disinfectant cleans, disinfects, and
deodorizes surfaces by killing mold, mildew,
and odor-causing microorganisms. It is a no-
rinse, one-step cleaner that is incredibly ef-
fective against a broad spectrum of bacteria.
It also inhibits the growth of mold and mildew
and their odors when used as directed. Mol-
dex® Disinfectant cleaner is also registered
with the EPA and designed for both household
and industrial cleaning. It is also approved for
use in hospitals.
Applications:
General Household and Industrial Cleaning
Professional Disaster Restoration
Water and Fire Damage
Sewer Back-up (Black & Gray Water)
Mold & Mildew Control
Approved for Hospital Use
Properties:
Type: EPA Registered Quaternary
Color: Clear, No Dyes
Odor: Slight, Low Odor
pH: 6 - 8.5
Freezing: Freeze / Thaw Stable
Viscosity: Consistency of Water
Storage: 2 Years
protectant
Moldex® Protectant is simple to use for mold
control. The spray provides an invisible bar-
rier that protects against the harmful effects
of mold and mildew. It creates a Mold and
Algae Proof Barrier that dries clear and fast.
Moldex® Protectant was designed for both
indoor and outdoor applications and is mois-
ture resistant on most surfaces.
Applications:
Shower curtains, Walls, Plastic, Drywall, Tarps,
Tents, Canvas, Boat & R.V. Tops, Fabric, Vinyl,
Ceramic, Roofs, Siding, Shingles, Asphalt, Con-
crete, Foundations, Brick, Masonry, Walkways,
Retaining Walls, Patio Furniture, Awnings, Tile,
Grout, Plastic, Previously-painted surfaces,
Basements, Window frames, and Sealed Wood.
Properties:
Color: White, (Dries Clear)
Odor: Characteristic
Solubility in H2O: Dilutable
Appearance: Thick Milkey Aqueous Liquid
VBW: 48%
Storage: 2 Years
Clear Mold-Proof Barrier
One-Step Cleaner, Disinfectant, Fungicide,
Mildewstat
Clean
.DISINFECTANT.
Product Specications:
Seal
.PROTECTANT.
Product Specications:
TM
/
