POLYWOOD RT236SA Operating instructions

Type
Operating instructions

This manual is also suitable for

D - .27 X 3 WAFER SOCKET "A"
6
D
D
D
D
A
D
Removable table plug
included in table.
D
C
C
B
A - 1/4-20 X 1-1/2 WAFER SHCS
FINE THREAD
1
FINE THREAD
B - 1/4-20 X 2-1/2 WAFER SHCS
4
C - .27 X 2-1/2 WAFER SOCKET "A"
8
9/26/2012
ASSEMBLY INSTRUCTIONS
__(1) Hardware pack
Qty. Description
Models: RT236, RCT236, RRT236, RBT236
the umbrella brace.
Step 1
Attach feet to legs using
(8) 2 1/2" screws.
Attach the leg assemblies to the table top using
Lay the table top on a flat surface.
Step 2
(4) 2 1/2" Chair bolts (
fine thread
)
*Please note: umbrella support optional,
can be removed if necessary to fit
umbrella stand
4mm HEX KEY, ALLEN
(INCLUDED)
Set table upright and tighten all bolts
Step 4
TOOLS NEEDED
Step 3
Attach leg braces using
(4) 3" screws
Attach umbrella brace to
the leg braces using (2) 3" screws.
Install 1 1/2" bolt into threaded insert on
__(1) Table top
__(4) Leg
__(2) Foot
__(2) Brace
__(1) Umbrella Brace
ALL HARDWARE IS COATED STAINLESS STEEL UNLESS OTHERWISE SPECIFIED
  • Page 1 1

POLYWOOD RT236SA Operating instructions

Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI