TrafficMASTER H4118-3644-1200 Installation guide

SEAMING INSTRUCTIONS

Style NAME Prime Spot STYLE NO. H4118 DATE 11/26/2018

Small block Pattern Repeat 1/2" x 3/4"

SIDE SEAMS

CROSS SEAMS

Keep all cross seams to a minimum

Find and separate a row in each piece of carpet to be seamed.

On one piece of carpet leave on a high cut yarn row down the length of carpet.

On other piece of carpet leave on the loop yarn row , then cut along the yarn rows described above using a cushion

back cutter.

Use the above procedure for all cross seams

Allow seam to completely cool off before stretching.

Pull both pieces together and move one or the other up or down to bring on pattern match, if satisfied with seam fit and pattern match.

pattern match then apply a seam sealer to both cut edges and allow to dry.

Using a premium quality seam tape, seam pieces together and follow seaming with a round wheel seam roller, rolling

up and down seam, use a seam weight to hold seam flat while seam is cooling off.

This manual is also suitable for

Download PDF