Wilkins 3-ZW205 Specification

Type
Specification
Model ZW209 with "SH" option
- stainless braided hose
Model ZW205FPA with "SP" option
- stainless steel pilotry
Zurn Wilkins Automatic Control Valves
Lowest Total Cost of Ownership
Features and Benefits
Valve design focused on simplifying maintenance and repair
- Isolation valves allow for service and maintenance without
shutting down the system
- Union connections simplify pilotry repairs
- Wye strainer can be cleaned in-line without system shut-down
- Hex on main valve stem allows for use of standard tools
Standard valve features enhance total cost of ownership
- Pressure gauges allow for constant system monitoring
- Epoxy coating lengthens the service life of the valve
- Stainless steel hardware resists corrosion over time
- Simplified maintenance with readily available repair kits
48 hour lead time speeds delivery, maximizes up-time*
Equivalent lay length to leading manufactures for ease of retrofit
ZurnSpec
SM
specification tools available on Zurn.com
Available Body Types
Standard Globe
Reduced Port
Angle
1-1/4" - 16" available
*Large quantities and special configurations may require longer lead time
Form No. ZMKTG480-74, Rev. 09/15
ZW200 Series Overview
Function Model # Product Description Operational Characteristics
Pressure Reducing ZW209 Series Pressure Reducing Reduces a high inlet pressure to a lower downstream pressure
Equipment Protection ZW207 Excess Pressure Shut-off Closes when downstream pressure exceeds a pre-set limit
Automated Open/Close ZW206 Solenoid Operated Opens or closes when the valve receives an electric signal
Relief/Sustain ZW205 Pressure Relief / Pressure Sustaining Relieves excess pressure or maintains inlet pressure
Level Control
ZW204 Non-Modulating Float Controls the water level in a tank
ZW221/ZW222 Altitude Valve
Controls water level in reservoir or tank
Fire Sprinkler Systems
ZW209FP Fire Protection Pressure Reducing Reduces a high inlet pressure to a lower downstream pressure
in fire protection systems
ZW205FP Fire Pump Pressure Relief Relieves excess pressure in a fire protection system
ZW215FP Fire Protection Pump Suction Control Maintains a minimum suction pressure to a fire protection pump
System/Pump Protection ZW218 Check Valve Closes when downstream pressure exceeds upstream pressure
O-ring stem seals
for ease of repair
Hex on
stainless
steel stem
simplies
maintenance
Stainless steel
fasteners with
washers
Wye strainer
comes
standard,
allowing quick
and simple
debris removal
Isolation valves
and pressure
gauges come
standard for
commissioning
and service
ZURN WILKINS, 1747 Commerce Way, Paso Robles, CA 93446 Phone: 855-ONE-ZURN (855-663-9876) Fax: 805-238-5766
In Canada: ZURN INDUSTRIES LIMITED, 3544 Nashua Dr., Mississauga, Ontario L4V 1L2 Phone: 905-405-8272 Fax: 905-405-1292
Stainless steel pilotry
for enhanced corrosion
resistance
Standard copper
tubing
Union connections
simplify pilotry
repairs
Fully coated
lip centers
cover during
maintenance
reassembly
Top and bottom
guided diaphragm
assembly for
even sealing and
repeatability
All valves come
standard with epoxy
coating for extended
service life
Options
Identical lay length with leading manufacturers
for retrofit opportunities
Braided stainless steel
tubing for ease of
maintenance
  • Page 1 1
  • Page 2 2

Wilkins 3-ZW205 Specification

Type
Specification

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI