Toro Stump Grinder Attachment User manual

Brand: Toro

Model: Stump Grinder Attachment

Type: User manual

This manual is also suitable for

Stump Grinder, Compact Tool Carrier

Toro Stump Grinder Attachment is designed for use on Toro compact tool carriers to grind and remove tree stumps and surface roots, making it ideal for clearing land or removing unwanted stumps from your property. Its powerful grinding mechanism and sturdy construction ensure efficient and effective stump removal, helping you achieve a neat and well-maintained outdoor space.

FormNo.3412-312RevA

StumpGrinder

CompactToolCarrier

ModelNo.22429—SerialNo.400000000andUp

Registeratwww.Toro.com.

OriginalInstructions(EN)

*3412-312*A

ThisproductcomplieswithallrelevantEuropeandirectives.

Fordetails,pleaseseetheDeclarationofIncorporation(DOI)

atthebackofthispublication.

WARNING

CALIFORNIA

Proposition65Warning

Thisproductcontainsachemicalorchemicals

knowntotheStateofCaliforniatocausecancer,

birthdefects,orreproductiveharm.

Useofthisproductmaycauseexposureto

chemicalsknowntotheStateofCalifornia

tocausecancer,birthdefects,orother

reproductiveharm.

Introduction

ThismachineisdesignedforuseonTorocompacttool

carrierstogrindandremovetreestumpsandsurfaceroots.It

isnotintendedtocutrockoranyothermaterialotherthan

woodandthesoilaroundastump.

Readthisinformationcarefullytolearnhowtooperateand

maintainyourproductproperlyandtoavoidinjuryand

productdamage.Youareresponsibleforoperatingthe

productproperlyandsafely.

YoumaycontactTorodirectlyatwww.Toro.comforproduct

safetyandoperationtrainingmaterials,accessoryinformation,

helpndingadealer,ortoregisteryourproduct.

Wheneveryouneedservice,genuineToroparts,oradditional

information,contactanAuthorizedServiceDealerorToro

CustomerServiceandhavethemodelandserialnumbersof

yourproductready.Figure1identiesthelocationofthe

modelandserialnumbersontheproduct.Writethenumbers

inthespaceprovided.

g013652

Figure1

1.Modelandserialnumberlocation

ModelNo.

SerialNo.

Thismanualidentiespotentialhazardsandhassafety

messagesidentiedbythesafety-alertsymbol(Figure2),

whichsignalsahazardthatmaycauseseriousinjuryordeath

ifyoudonotfollowtherecommendedprecautions.

g000502

Figure2

1.Safety-alertsymbol

Thismanualuses2wordstohighlightinformation.

Importantcallsattentiontospecialmechanicalinformation

andNoteemphasizesgeneralinformationworthyofspecial

attention.

8111LyndaleAvenueSouth

Bloomington,MN55420

Contactusatwww.Toro.com.

PrintedintheUSA

AllRightsReserved

Contents

Safety...........................................................................3

StabilityRatings.......................................................5

SafetyandInstructionalDecals.................................5

Setup............................................................................6

1InstallingtheShieldBrackets..................................6

2AssemblingtheOperatorShield..............................9

3InstallingtheChipGuard......................................10

ProductOverview.........................................................10

Specications........................................................10

Attachments/Accessories........................................10

Operation....................................................................11

GrindingStumps....................................................11

GrindingRoots......................................................12

TransportingtheStumpGrinderonaTrailer..............12

OperatingTips......................................................12

Maintenance.................................................................13

RecommendedMaintenanceSchedule(s)......................13

GreasingtheMachine.............................................13

ReplacingtheTeeth................................................14

Storage........................................................................14

Troubleshooting...........................................................15

Safety

Improperuseormaintenancebytheoperatororowner

canresultininjury.Toreducethepotentialforinjury,

complywiththesesafetyinstructionsandthoseinthe

tractionunit

Operator's Man ual

.Alwayspayattentionto

thesafetyalertsymbol,whichmeans

Caution

W ar ning

Danger

—personalsafetyinstruction.Failureto

complywiththeinstructionmayresultinpersonalinjury

ordeath.

DANGER

Theremaybeburiedpower,gas,and/ortelephone

linesintheworkarea.Shockorexplosionmay

occurifyoudigintothem.

Havethepropertyorworkareamarkedforburied

linesanddonotdiginmarkedareas.Contactyour

localmarkingserviceorutilitycompanytohavethe

propertymarked(forexample,intheUnitedStates,

call811forthenationwidemarkingservice).

DANGER

Thestumpgrinderissolelydesignedandtested

forgrindingstumpslessthan91cm(36inch)tall.

Anyotherusesmaycauseahazardoussituation

resultingininjuryordeathtoyouorbystanders.

Onlyusethestumpgrinderforgrindingstumps

lessthan91cm(36inch)tall.

WARNING

Whentheengineisoff,attachmentsintheraised

positioncangraduallylower.Someonenearbymay

bepinnedorinjuredbytheattachmentasitlowers.

Alwayslowertheattachmentlifteachtimeyoushut

offthetractionunit.

WARNING

Duringoperation,debriswillyinalldirections

andcancauseinjurytoeyesandotherexposed

bodyparts.

•Neveroperatethestumpgrinderwithoutthe

shieldinstalledonthetractionunitandthechip

guardonthegrinder.

•Wearpersonalprotectivegearduringoperation.

•Keepallbystandersatleast9m(30ft)away

fromtheworkarea.

WARNING

Whengoingupordownhill,themachinecould

overturniftheheavyendistowardthedownhill

side.Someonemaybepinnedorseriouslyinjured

bythemachineifitoverturns.

Operateupanddownslopeswiththeheavyendof

themachineuphill.Thisattachmentmakesthe

frontendheavy.

WARNING

Ifyoudonotfullyseattheattachmentlockingpins

intheattachmentmountplateholes,theattachment

couldfalloffthetractionunitandseverelyinjure

youorbystanders.

•Ensurethatyoufullyseattheattachment

lockingpinsthroughtheholesintheattachment

mountplatebeforeliftingtheattachment.

•Ensurethattheattachmentmountplateisfreeof

anydirtordebristhatmayhindertheconnection

ofthetractionunittotheattachment.

•Refertoyourtractionunit

Operator’ s Man ual

fordetailedinformationonsafelyconnectingan

attachmenttoyourtractionunit.

WARNING

Lightningcancausesevereinjuryordeath.

Iflightningisseenorthunderisheardinthearea,

donotoperatethemachine;seekshelter.

CAUTION

Hydraulicuidescapingunderpressurecan

penetrateskinandcauseinjury.Fluidinjectedinto

theskinmustbesurgicallyremovedwithinafew

hoursbyadoctorfamiliarwiththisformofinjury;

otherwise,gangrenemayresult.

•Keepyourbodyandhandsawayfrompinhole

leaksornozzlesthatejecthigh-pressure

hydraulicuid.

•Usecardboardorpapertondhydraulicleaks,

neveruseyourhands.

CAUTION

Hydrauliccouplers,hydrauliclines/valves,and

hydraulicuidmaybehotandcanburnyouifyou

touchthem.

•Weargloveswhenoperatingthehydraulic

couplers.

•Allowthetractionunittocoolbeforetouching

hydrauliccomponents.

•Donottouchhydraulicuidspills.

StabilityRatings

Todeterminethedegreeofslopeyoucantraversewith

thestumpgrinderinstalledonatractionunit,ndthe

stabilityratingforthehillpositionyouwanttotravelinthe

appropriatetablebelow,thenndthedegreeofslopeforthe

sameratingandhillpositionintheStabilityDatasectionof

thetractionunitOperator’sManual.

WARNING

Exceedingthemaximumrecommendedslope

cancausethetractionunittotip,crushingyouor

bystanders.

Donotdrivethetractionunitonaslopesteeper

thanthemaximumrecommendedslope,as

determinedinthefollowingtablesandthetraction

unit

Operator's Man ual

Important:IfyouhaveatractionunitotherthanaTX

compactutilityloader,donotusethecounterweight

onthetractionunitwhenusingthestumpgrinder.If

youusethecounterweight,thetractionunitwillbeless

stableinthefrontandsideuphillpositions.

OrientationStabilityRating

FrontUphill

RearUphill

SideUphill

SafetyandInstructionalDecals

Safetydecalsandinstructionsareeasilyvisibletotheoperatorandarelocatednearanyareaofpotential

danger.Replaceanydecalthatisdamagedormissing.

decal136-5814

136-5814

1.Warning—readthe

Operator'sManual.

3.Thrownobject

hazard—keepallguards

andshieldsinplace;keep

bystandersawayfromthe

machine.

2.Cutting/dismemberment

hazardofhands

andfeet,rotating

knives/blades—waitforall

movingpartstostop;keep

allguardsandshieldsin

place.

decal136-5817

136-5817

1.Cutting/dismembermenthazardoffoot,rotating

knives/blades—waitforallmovingpartstostop;keephands

andfeetawayfrommovingparts.

decal136-5818

136-5818

1.Thrownobjecthazard—keepallguardsandshieldsin

place;keepbystandersawayfromthemachine.

Setup

LooseParts

Usethechartbelowtoverifythatallpartshavebeenshipped.

ProcedureDescription

Qty.

Use

Rightshieldbracket(3holes)—200/300

SeriesorTX400/500Seriesonly

Leftshieldbracket(3holes)—200/300

SeriesorTX400/500Seriesonly

Self-tappingscrew(5/16x3/4inch)

Rightshieldbracket(2holes)—TX1000

only

Leftshieldbracket(2holes)—TX1000

only

Bolt(1/4x3/4inch)—TX1000only

Locknut(1/4inch)—TX1000only

Installtheshieldbrackets.

Shieldsupport(1bend)—200/300

SeriesorTX400/500Series

Shieldsupport(2bends)—TX1000only

Shield

Bolt(1/4x1-1/2inch)

Washer8

Locknut(1/4inch)

Assembletheoperatorshield.

Chipguard

Guardpin

Hairpincotter1

Installthechipguard.

InstallingtheShieldBrackets

Partsneededforthisprocedure:

Rightshieldbracket(3holes)—200/300SeriesorTX

400/500Seriesonly

Leftshieldbracket(3holes)—200/300SeriesorTX

400/500Seriesonly

Self-tappingscrew(5/16x3/4inch)

Rightshieldbracket(2holes)—TX1000only

Leftshieldbracket(2holes)—TX1000only

Bolt(1/4x3/4inch)—TX1000only

Locknut(1/4inch)—TX1000only

200or300SeriesTractionUnitOnly

Important:Usetheshieldbracketswith3holes.

1.Insertthetabontheshieldbracketintothelift-point

holeonthetractionunit,withtheholeinthebracket

aligningwiththesmallholeinthetractionunitframe

(Figure3).

Note:Thereisarightandleftbracket.Ensurethat

youinstallthecorrectbracketoneachside.Thetab

shouldbeinthelift-pointholeandthebracketshould

beontheoutsideoftheframe(Figure3).

g013653

Figure3

1.Shieldbracket

3.Tab

2.Lift-pointhole4.Self-tappingscrew

2.Securethebrackettotheframewithaself-tapping

screw(Figure3).

3.Repeatsteps1and2fortheothersideofthetraction

unit.

TX400or500SeriesTractionUnitOnly

Important:Usetheshieldbracketswith3holes.

1.Measureinfromtheedgesoftheframeasillustrated

inFigure4andmarkthelocationsoftheholesfor

mountingtheshieldbracket.

Note:Iftheholesexist,skiptostep3.

g203568

Figure4

1.4.6cm(1.8inch)3.4.6cm(1.8inch)

2.1.4cm(0.6inch)

4.Mountingholes

2.Drillahole(5/16inchdiameter)throughtheframe

ateachmarkedlocation.

3.Alignthetabontheshieldbracketwiththefrontedge

oftheframewiththebracketinsideoftheloader-arm

pocket(Figure5).

Note:Thereisarightandleftbracket.Ensurethat

youinstallthecorrectbracketoneachside.Thetab

shouldbeovertheframeedgeandthebracketshould

beinsidetheloader-armpocketwiththe2smaller

holesinthebracketlinedupwiththeholesyoudrilled

intheframe(Figure5).

g013655

Figure5

1.Self-tappingscrew2.Shieldbracket

4.Securethebrackettotheframewith2self-tapping

screwsasillustratedinFigure5.

5.Repeatsteps1through4fortheothersideofthe

tractionunit.

TX1000TractionUnitOnly

Important:Usetheshieldbracketswith2holes.

1.Measureinfromtheedgesoftheframeasillustrated

inFigure6andmarkthelocationsoftheholesfor

mountingtheshieldbracket.

Note:Iftheholesexist,skiptostep3.

g202805

Figure6

1.7.0cm(2-3/4inch)

4.Hole

2.5.7cm(2-1/4inch)5.Referencebar

3.1.3cm(1/2inch)

2.Drillahole(9/32inchdiameter)throughtheframe

ateachmarkedlocation.

3.Installtheleftshieldbracketontheleftframeusing2

bolts(1/4x3/4inch)and2Locknuts(1/4inch)as

showninFigure7.

g202825

Figure7

1.Bolts(1/4x3/4inch)3.Locknut(1/4inch)

2.Leftshieldbracket

4.Installtherightshieldbracketontherightframe2

bolts(1/4x3/4inch)and2locknuts(1/4inch),similar

toFigure7.

AssemblingtheOperator

Shield

Partsneededforthisprocedure:

Shieldsupport(1bend)—200/300SeriesorTX

400/500Series

Shieldsupport(2bends)—TX1000only

Shield

Bolt(1/4x1-1/2inch)

8Washer

Locknut(1/4inch)

AssemblingtheShield

Note:Usetheshieldsupportswith1bendfor200/300

seriesorTX400/500seriestractionunits.Usetheshield

supportswith2bendsforTX1000tractionunits.

1.Slidetheshieldsupportsintothepocketsintheshield

bracketsonthetractionunit(Figure8).

g202610

Figure8

200/300SeriesorTX400/500SeriesTractionUnits

1.Locknut(8)5.Skirt

2.Washer(8)6.Shieldsupport(2)

3.Shield7.Shieldbracket(2)

4.Bolt(8)

g202842

Figure9

TX1000TractionUnitsOnly

1.Locknut(8)5.Skirt

2.Washer(8)6.Shieldsupport(2)

3.Shield7.Shieldbracket(2)

4.Bolt(8)

2.Assembletheshieldandexibleskirttotheshield

supportsasillustratedinFigure8,using8bolts(1/4x

1-1/2inch),8washers,and8locknuts(1/4inch).

Note:Theskirtshoulddrapeovertheengineorhood.

InstallingtheChipGuard

Partsneededforthisprocedure:

Chipguard

Guardpin

1Hairpincotter

Procedure

Thestumpgrinderhas4setsofmountingholesfor

positioningthechipguard(Figure10).Movetheguardup

(upperholes)whenyouaregrindingclosetothegroundand

down(lowerholes)whenyouarechippingtallstumps.Install

thechipguardasfollows:

1.Positionthemountingtubeontheguardbetween2

holesonthegrinder(Figure10).

g202609

Figure10

1.Guardpin

4.Mountingtube

2.Mountingholes5.Hairpincotter

3.Chipguard

2.Slidetheguardpinthroughtheholesinthegrinder

andthemountingtube(Figure10).

3.Securethepinwithahairpincotter(Figure10).

ProductOverview

g013651

Figure11

1.Chipguard4.Stumpgrindinghead

2.Mountingplate5.Teeth

3.Pivotbolt

Specications

Note:Specicationsanddesignaresubjecttochange

withoutnotice.

Width,withchipguard

112cm(44inches)

Width,withoutchipguard

66cm(26inches)

Length

51cm(20inches)

Height

79cm(31inches)

Weight

120Kg(265lb)

Attachments/Accessories

AselectionofToroapprovedattachmentsandaccessoriesis

availableforusewiththemachinetoenhanceandexpand

itscapabilities.ContactyourAuthorizedServiceDealeror

Distributororgotowww .Toro.comforalistofallapproved

attachmentsandaccessories.

Operation

WARNING

Duringoperation,debriswillyinalldirections

andcancauseinjurytoeyesandotherexposed

bodyparts.

•Neveroperatethestumpgrinderwithoutthe

shieldinstalledonthetractionunitandthechip

guardonthegrinder.

•Wearpersonalprotectivegearduringoperation.

•Keepallbystandersatleast9m(30feet)away

fromtheworkarea.

RefertoyourtractionunitOperator’sManualformore

informationoninstallingandremovingattachmentsonyour

tractionunit.

Important:Alwaysusethetractionunittoliftandmove

theattachment.

GrindingStumps

1.Ifyourtractionunithasaspeedselector,setittothe

SLOWposition.

2.Starttheengine.

3.Pulltheauxiliaryhydraulicslevertotheoperatorgrip

toengagethestumpgrinder.

4.Positionthegrinderontheleftsideandbehindthe

stump(Figure12).

g013658

Figure12

5.Swingthegrindertowardyouusingtheattachment-tilt

lever,grindingatadepthof0.5to5cm(1/4to2

inches),dependingonthehardnessofthewood

(Figure12).

Note:Ifyoucuttoodeep,thegrinderstalls.Ifitstalls,

raiseitslightlyandtryagain.

6.Swingthegrinderbackout(Figure12),lowerit0.5to5

cm(1/4to2inches),andrepeatsteps4through6until

youhavegrounddownafewinches.

7.Raisetheloaderarmstotheoriginalheight.

8.Movethegrindertotheright(Figure12).

9.Repeatsteps4through8untilyoureachtherightside

ofthestump.

10.Returnthegrindertotheleftsideofthestump,lower

it,andrepeatsteps3through10untilyouhaveground

thestumpintotheground.

Note:Tocontainthechips,youmayneedtostopthe

grinderandmovethechipguardupasyoumovethe

grinderdown.

11.Whennished,stopthegrinderbymovingtheauxiliary

hydraulicsleverintoneutral.

GrindingRoots

1.Stopthegrinderandhangitverticallyfromtheloader

armsafewcentimeters(inches)offtheground.

2.Shutofftheengineandremovethekey.

3.Loosenthelargeboltonthetopofthegrinder(Figure

13).

g013659

Figure13

1.Largebolt—loosen2.Frontbolt—remove

4.Removethefrontboltandnutsecuringthegrinder

(Figure13).

5.Swingthegrinder30degreesclockwise(Figure13).

6.Torquethelargeboltontopofthegrinderto406N∙m

(300ft-lb)asshowninFigure13.

7.Installtheboltandnutinthefrontholeandtorque

themto101N∙m(75ft-lb)asshowninFigure13.

8.Startthetractionunitandstartthegrinder.

9.Lowerthegrinderintotheroot.

10.Movethegrinderalongthelengthoftherootby

movingthetractionunitovertheroot.

11.Whennished,stopthegrinderbymovingtheauxiliary

hydraulicsleverintoneutral.

12.Shutofftheengineandremovethekey.

13.Loosenthelargeboltonthetopofthegrinder(Figure

13).

14.Removethefrontboltandnutsecuringthegrinder

(Figure13).

15.Swingthegrinder30degreescounter-clockwise(Figure

13).

16.Torquethelargeboltontopofthegrinderto406N∙m

(300ft-lb)asshowninFigure13.

17.Installtheboltandnutinthefrontholeandtorque

themto101N∙m(75ft-lb)asshowninFigure13.

TransportingtheStump

GrinderonaTrailer

Placetheattachmentonatrailerortruckcapableofcarrying

it.Securelytieittothetrailerortruckusingtiestraps

appropriatefortheweightoftheattachmentandforhighway

use.

Important:Removetheoperator'sshieldbefore

transportingthetractionunittoavoiddamagetothe

shieldofthetractionunit.

OperatingTips

•Alwaysusefullthrottle(maximumenginespeed).

•Nevertransporttheattachmentwiththeloaderarms

raised.Keepthearmsloweredandtheattachmenttilted

up.

•Ifyourtractionunithasaspeedselector(presentonsome

wheeledtractionunits),setittotheslow(turtleposition).

•Ifyourtractionunithasaowdivider(presentonsome

wheeledtractionunits),adjustittoapproximatelythe10

o’clockposition.

Maintenance

RecommendedMaintenanceSchedule(s)

MaintenanceService

Interval

MaintenanceProcedure

Beforeeachuseordaily

•Greasethemachine.

•Checktheconditionoftheteethandrotateorreplaceanythatarewornordamaged.

Beforestorage

•Greasethemachine.

•Paintchippedsurfaces.

CAUTION

Ifyouleavethekeyintheignitionswitch,someonecouldstarttheengine.Accidentalstartingofthe

enginecouldseriouslyinjureyouorbystanders.

Removethekeyfromtheignitionswitchbeforeyoudoanymaintenance.

GreasingtheMachine

ServiceInterval:Beforeeachuseordaily

Beforestorage

GreasethettinginFigure14.

g203602

Figure14

GreaseType:General-purposegrease

1.Parkthetractionunitonalevelsurface,engagethe

parkingbrake(ifequipped)andlowertheloaderarms.

2.Shutofftheengineandremovethekey.

3.Cleanthegreasettingwitharag.

4.Connectagreaseguntothetting.

5.Pumpgreaseintothettinguntilgreasebeginstoooze

outofthebearings.

6.Wipeupanyexcessgrease.

ReplacingtheTeeth

ServiceInterval:Beforeeachuseordaily—Checkthe

conditionoftheteethandrotateor

replaceanythatarewornordamaged.

Duetothehighamountofwearplacedontheteeth,youwill

needtorotateandreplacethemperiodically.

Eachtoothisindexedwiththreepositionssoyoucanrotate

ittwice,exposinganewsharpedgebeforereplacingthe

tooth.Torotateatooth,loosenthenutsecuringthetooth

(Figure15).Pushthetoothforwardandrotateitonethird

ofaturn,bringinganunusededgetotheoutside.Torquethe

nutsecuringthetoothto37to45N∙m(27to33ft-lb).

g013417

Figure15

(Yourgrinder'sappearancemayvaryfromthatshownin

theillustration)

1.Nut3.Tooth

2.Toothholder

Toreplaceatooth,removethenutsecuringthetoothto

removeit,theninstallanewtoothandnutinthesame

position(Figure15).Torquethenutsecuringthetoothto

37to45N∙m(27to33ft-lb).

Storage

1.Beforelongtermstorage,brushthedirtfromthe

attachment.

2.Checktheconditionoftheteeth.Turnorreplaceany

wornordamagedteeth.

3.Checkandtightenallbolts,nuts,andscrews.Repairor

replaceanypartthatisdamagedorworn.

4.Ensurethatallhydrauliccouplersareconnected

togethertopreventcontaminationofthehydraulic

system.

5.Paintallscratchedorbaremetalsurfaces.Paintis

availablefromyourAuthorizedServiceDealer.

6.Storetheattachmentinaclean,drygarageorstorage

area.Coverittoprotectitandkeepitclean.

Troubleshooting

Problem

PossibleCauseCorrectiveAction

1.Youarecuttingtoodeep.

1.Raisetheloaderarms13mm(1/2

inch).

Cuttingdiskstopsduringcutting.

2.Teethareworn,damaged,orbroken.2.Rotateorreplaceanyworn,damaged,

orbrokenteeth.

1.Ahydrauliccouplerisnotcompletely

connected.

1.Checkandtightenallcouplers.

2.Ahydrauliccouplerisdamaged.

2.Check/replacecouplers.

3.Thereisanobstructioninahydraulic

hose.

3.Findandremovetheobstruction.

4.Anauxiliaryvalveonthetractionunit

isnotopening.

4.Repairthevalve.

5.Thehydraulicmotorordrivehasfailed.5.ContactyourAuthorizedService

Dealer.

Thecuttingdiskdoesnotturnorturns

slowly.

6.Thecheckvalvebrakeisreversed.6.Reversethecheckvalvedirection;

contactyourAuthorizedService

Dealer.

1.Teethareworn.1.Rotateorreplaceanywornteeth.

2.Thesettingiswrongontheowdivider

andspeedlever(applicablewheeled

unitsonly).

2.Settheowdividertothe10:00

positionandthespeedlevertothe

turtleposition.

3.Thereisarestrictioninaquickcoupler

orhose.

3.Checkthehosesandcouplersand

repairanyproblemsfound.

4.Thehydraulicsystemistoohot.

4.Shutthesystemdownandallowitto

cool.

Thegrinderdoesnotcutfastenough.

5.Thereliefvalveissetbelow

specications.

5.ContactyourAuthorizedService

Dealer.

1.Theauxiliary-valveleverisinthe

wrongposition.

1.Movetheauxiliary-valvelevertothe

rearwardposition.

Thecuttingdiskturnsinthewrong

direction

2.Thehydraulichosesarereversed.2.Disconnectthehosesandswitch

positions.

Notes:

DeclarationofIncorporation

TheToroCompany,8111LyndaleAvenueSouth,Bloomington,MN,USAdeclaresthatthefollowingunit(s)

conform(s)tothedirectiveslisted,wheninstalledinaccordancewiththeaccompanyinginstructionsontocertain

ToromodelsasindicatedontherelevantDeclarationsofConformity.

ModelNo.

SerialNo.

ProductDescriptionInvoiceDescription

GeneralDescription

Directive

22429400000000andUp

StumpGrinder

STUMPGRINDER

ATTACHMENTCE

StumpGrinder2006/42/EC

RelevanttechnicaldocumentationhasbeencompiledasrequiredperPartBofAnnexVIIof2006/42/EC.

Wewillundertaketotransmit,inresponsetorequestsbynationalauthorities,relevantinformationonthispartly

completedmachinery.Themethodoftransmissionshallbeelectronictransmittal.

ThismachineryshallnotbeputintoserviceuntilincorporatedintoapprovedT oromodelsasindicatedonthe

associatedDeclarationofConformityandinaccordancewithallinstructions,wherebyitcanbedeclaredin

conformitywithallrelevantDirectives.

Certied:EUTechnicalContact:

MarcelDutrieux

ManagerEuropeanProductIntegrity

ToroEuropeNV

Nijverheidsstraat5

2260Oevel

JoeHagerBelgium

Sr.EngineeringManager

8111LyndaleAve.South

Tel.+3216386659

Bloomington,MN55420,USA

January13,2017

EuropeanPrivacyNotice

TheInformationToroCollects

ToroWarrantyCompany(Toro)respectsyourprivacy.Inordertoprocessyourwarrantyclaimandcontactyouintheeventofaproductrecall,weaskyou

tosharecertainpersonalinformationwithus,eitherdirectlyorthroughyourlocalTorocompanyordealer.

TheT orowarrantysystemishostedonserverslocatedwithintheUnitedStateswhereprivacylawmaynotprovidethesameprotectionasapplies

inyourcountry.

BYSHARINGYOURPERSONALINFORMATIONWITHUS,YOUARECONSENTINGTOTHEPROCESSINGOFYOURPERSONALINFORMATION

ASDESCRIBEDINTHISPRIVACYNOTICE.

TheWayToroUsesInformation

Toromayuseyourpersonalinformationtoprocesswarrantyclaims,tocontactyouintheeventofaproductrecallandforanyotherpurposewhichwetell

youabout.ToromayshareyourinformationwithT oro'safliates,dealersorotherbusinesspartnersinconnectionwithanyoftheseactivities.Wewillnot

sellyourpersonalinformationtoanyothercompany.Wereservetherighttodisclosepersonalinformationinordertocomplywithapplicablelawsand

withrequestsbytheappropriateauthorities,tooperateoursystemsproperlyorforourownprotectionorthatofotherusers.

RetentionofyourPersonalInformation

Wewillkeepyourpersonalinformationaslongasweneeditforthepurposesforwhichitwasoriginallycollectedorforotherlegitimatepurposes

(suchasregulatorycompliance),orasrequiredbyapplicablelaw.

Toro'sCommitmenttoSecurityofY ourPersonalInformation

Wetakereasonableprecautionsinordertoprotectthesecurityofyourpersonalinformation.Wealsotakestepstomaintaintheaccuracyandcurrent

statusofpersonalinformation.

AccessandCorrectionofyourPersonalInformation

Ifyouwouldliketorevieworcorrectyourpersonalinformation,pleasecontactusbyemailat[email protected].

AustralianConsumerLaw

AustraliancustomerswillnddetailsrelatingtotheAustralianConsumerLaweitherinsidetheboxoratyourlocalToroDealer.

374-0282RevC

TheToroWarranty

Underground

Equipment

ALimitedWarranty

ConditionsandProductsCovered

TheT oroCompanyanditsafliate,T oroWarrantyCompany,pursuant

toanagreementbetweenthem,jointlywarrantyourT oroUnderground

Equipment(“Product”)tobefreefromdefectsinmaterialsorworkmanship.

Whereawarrantableconditionexists,wewillrepairtheProduct

atnocosttoyouincludingdiagnostics,labor,andparts.

ThefollowingwarrantyappliesfromthedatetheProductisdeliveredtothe

originalretailpurchaserorrentalowner.

ProductsWarrantyPeriod

EnginePoweredUnits&FluidMixers

1yearor1000operatinghours,

whicheveroccursrst

AllSerializedAttachments

1year

RockHammer6months

Engines

Throughenginemanufacturers:

2yearsor2000operatinghours,

whicheveroccursrst

InstructionsforObtainingWarrantyService

YouareresponsiblefornotifyingtheUndergroundDealerfromwhomyou

purchasedtheProductassoonasyoubelieveawarrantablecondition

exists.IfyouneedhelplocatingaUndergroundDealer,orifyouhave

questionsregardingyourwarrantyrightsorresponsibilities,youmay

contactusat:

ToroCustomerCare

ToroWarrantyCompany

8111LyndaleAvenueSouth

Bloomington,MN55420-1196

TollFreeat855-493-0088(U.S.Customers)

1-952-948-4318(InternationalCustomers)

OwnerResponsibilities

AstheProductowner,youareresponsibleforrequiredmaintenanceand

adjustmentsstatedinyourOperator'sManual.Failuretoperformrequired

maintenanceandadjustmentscanbegroundsfordisallowingawarranty

claim.

ItemsandConditionsNotCovered

Notallproductfailuresormalfunctionsthatoccurduringthewarranty

periodaredefectsinmaterialsorworkmanship.Thiswarrantydoesnot

coverthefollowing:

•Productfailureswhichresultfromtheuseofnon-Tororeplacement

parts,orfrominstallationanduseofadd-on,ormodiednon-T oro

brandedaccessoriesandproducts.Aseparatewarrantymaybe

providedbythemanufactureroftheseitems.

•Productfailureswhichresultfromfailuretoperformrecommended

maintenanceand/oradjustments.Failuretoproperlymaintainyour

ToroproductpertheRecommendedMaintenancelistedinthe

Operator’sManualcanresultinclaimsforwarrantybeingdenied.

•ProductfailureswhichresultfromoperatingtheProductinanabusive,

negligent,orrecklessmanner.

•Partssubjecttoconsumptionthroughuseunlessfoundtobedefective.

Examplesofpartswhichareconsumed,orusedup,duringnormal

Productoperationinclude,butarenotlimitedto:brakes,lters,lights,

bulbs,belts,tracksortires,diggingteeth,diggingbooms,digging,

drive,ortrackchains,trackpads,drivesprockets,idlers,rollers,

blades,cuttingedges,orothergroundengagingcomponents.

•Failurescausedbyoutsideinuence.Conditionsconsideredtobe

outsideinuenceinclude,butarenotlimitedto,weather,storage

practices,contamination,useofunapprovedfuels,coolants,lubricants,

additives,water,orchemicals,etc.

•Failureorperformanceissuesduetotheuseoffuels(e.g.gasoline,

diesel,orbiodiesel)thatdonotconformtotheirrespectiveindustry

standards.

•Normalnoise,vibration,wearandtear,anddeterioration.

•Normal“wearandtear”includes,butisnotlimitedto,damagetoseats

duetowearorabrasion,wornpaintedsurfaces,scratcheddecals,etc.

•Haulingexpenses,traveltime,mileage,orovertimeassociatedwith

transportingproducttotheauthorizedT orodealer.

Parts

Partsscheduledforreplacementasrequiredmaintenanceinthe

Operator’sManual,arewarrantedfortheperiodoftimeuptothescheduled

replacementtimeforthatpart.Partsreplacedunderthiswarrantyare

coveredforthedurationoftheoriginalproductwarrantyandbecomethe

propertyofT oro.Torowillmakethenaldecisionwhethertorepairany

existingpartorassemblyorreplaceit.T oromayuseremanufacturedparts

forwarrantyrepairs.

MaintenanceisatOwner’sExpense

Enginetune-up,lubrication,cleaningandpolishing,replacementoflters,

coolant,andcompletingrecommendedmaintenancearesomeofthe

normalservicesToroproductsrequirethatareattheowner’sexpense.

GeneralConditions

RepairbyanAuthorizedToroUndergroundDealerisyoursoleremedy

underthiswarranty.

NeitherTheToroCompanynorToroWarrantyCompanyisliablefor

indirect,incidentalorconsequentialdamagesinconnectionwiththe

useoftheToroProductscoveredbythiswarranty,includingany

costorexpenseofprovidingsubstituteequipmentorserviceduring

reasonableperiodsofmalfunctionornon-usependingcompletion

ofrepairsunderthiswarranty.ExceptfortheEmissionswarranty

referencedbelow,ifapplicable,thereisnootherexpresswarranty.All

impliedwarrantiesofmerchantabilityandtnessforusearelimitedto

thedurationofthisexpresswarranty.

Somestatesdonotallowexclusionsofincidentalorconsequential

damages,orlimitationsonhowlonganimpliedwarrantylasts,sotheabove

exclusionsandlimitationsmaynotapplytoyou.Thiswarrantygivesyou

speciclegalrights,andyoumayalsohaveotherrightswhichvaryfrom

statetostate.

Noteregardingenginewarranty:

TheEmissionsControlSystemonyourProductmaybecoveredby

aseparatewarrantymeetingrequirementsestablishedbytheU.S.

EnvironmentalProtectionAgency(EPA)and/ortheCaliforniaAirResources

Board(CARB).Thehourlimitationssetforthabovedonotapplytothe

EmissionsControlSystemWarranty.RefertotheEngineEmissionControl

WarrantyStatementsuppliedwithyourproductorcontainedintheengine

manufacturer’sdocumentationfordetails.

CountriesOtherthantheUnitedStatesorCanada

CustomerswhohavepurchasedT oroproductsexportedfromtheUnitedStatesorCanadashouldcontacttheirT oroDistributor(Dealer)toobtain

guaranteepoliciesforyourcountry,province,orstate.IfforanyreasonyouaredissatisedwithyourUndergroundDealer’sserviceorhavedifculty

obtainingguaranteeinformation,contacttheT oroimporter.

AustralianConsumerLaw:AustraliancustomerswillnddetailsrelatingtotheAustralianConsumerLaweitherinsidetheboxoratyourlocalToro

Dealer.

374-0292RevC

Toro Stump Grinder Attachment User manual

Brand: Toro

Model: Stump Grinder Attachment

Type: User manual

This manual is also suitable for

Stump Grinder, Compact Tool Carrier

Download PDF

report

Toro Stump Grinder Attachment User manual

This manual is also suitable for

Toro Stump Grinder Attachment User manual

Related papers

Other documents