Tiger Brand 3A-76710 Installation guide

Type
Installation guide

Tools Required: None
1. 
construction document.
2. Adjust screw to slightly short of the length needed between footer and load
carrying beam at installation location (Figure
).
3. 
nut and screw on the footer (adjustable end down) (Figure
).
4. 

and the footer below (Figure
).
5. Additional screw adjustments may be made during construction to keep
floor level
6. 
(Figure
).


LOAD


FOOTER

specific installation requirements in your area.

adJustable COlumNs
iNstallatiON iNstruCtiONs
©Tiger Brand Jack Post 2014
TIGER BRAND JACK POST | 330.576.1750 | TigerBrandJackPost.com
  • Page 1 1

Tiger Brand 3A-76710 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI