CMI 192-6445 Installation guide

CMI
Brand
CMI
Model
192-6445
Category
Sanitary ware
Type
Installation guide

CMI 192-6445 is a single-handle vessel faucet with dual function pop-up drain, designed for use with overflow or no-overflow bathroom sinks. It features a polished chrome finish and is easy to install with a single-hole mount. The faucet includes an aerator for a water-saving flow rate and a pop-up drain for easy sink draining. With its sleek design and durable construction, the CMI 192-6445 is a great choice for any bathroom remodel.

CMI 192-6445 is a single-handle vessel faucet with dual function pop-up drain, designed for use with overflow or no-overflow bathroom sinks. It features a polished chrome finish and is easy to install with a single-hole mount. The faucet includes an aerator for a water-saving flow rate and a pop-up drain for easy sink draining. With its sleek design and durable construction, the CMI 192-6445 is a great choice for any bathroom remodel.

Revised 4/24/17
In the event that Freendo faucets are used in a Commercial Application, this warranty is limited for
a period of 5 years, unless otherwise specifically stated in the catalog and/or price book.
Model No. : 192-6443 Polished Chrome
192-6444 Brushed Nickel
192-6445 Oil-Rubbed Bronze
Single Hole Installation
works with overflow or no-overflow bathroom sinks
Aegean Single Handle Vessel Faucet With
Dual Function Pop-up Drain
repair. Compass Manufacturing International will, at its discretion, provide new or equivalent replacement
parts for any product that proves to be defective under normal usage and service.
Index
Part Name
Set Screw
Handle
Body
Aerator
Shank
Locknut
Waterway
Adapter
Allen Key
Locknut
Stopper Core
Stopper Housing(Without Overflow Hole)
Cover
Washer
Outlet Pipe
Cartridge
Cartridge Locknut
Trim Cap
Clamp
Nut
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
O-ring
O-ring
O-ring
Screw
O-ring
Stopper Housing(With Overflow Hole)
Washer
Washer
Washer
33
34
Flow Restricter
Screw
Screen Filter
Base
and/or Silicone
22
23
24
25
26
27
28
29
30
31
32
1. Position the faucet in order on the countertop as
shown. Don't forget the O-ring 18 .
2. Assemble clamp 19 and locknut 20 to faucet shank
by hand and tighten the screws 21 with the
screwdriver.
Faucet Installation
19
21
20
1
2
3
4
5
6
7
8
9
10
11
12
13
14
21
20
19
18
17
16
15
33
34
18
A. B. C.
Warning:
The supply valves and
supply lines are not
included.
1. Remove old drain assembly. Clean all sink surfaces
to remove old putty and dirt before installing new drain.
Disassemble new pop-up assembly: remove nut 31 ,
outlet pipe 30 , washer 29 , locknut 28 , washer 27 and
washer 26 .
26
27
28
29
30
31
If the faucet is installed in a sink with overflow,
follow step 2. Otherwise, please skip to step 3.
2. Unscrew the cover 22 counterclockwise by hand.
Unscrew the stopper core 24 counterclockwise with
proper tool. Replace the original stopper housing
without overflow hole 25 by the new stopper housing
with overflow hole 32 . And assemble the stopper
core 24 , cover 22 . Continue to step 3.
22
24
25
32
3. Place a ring of silicone sealant around the
washer 26 or the drain opening of the sink.
Insert stopper housing 25 with washer 26
through the drain hole.
26
25
4. Install washer 27 to the stopper housing
25 , then hand tighten the locknut 28 , but
do not over tighten. See diagram for visual.
27
25
28
5. Position washer 29 into outlet pipe 30 , attach
nut 31 onto outlet pipe 30 , and then hand
tighten nut 31 , but do not over tighten. See
diagram for visual.
Hint-Outlet 30 is used to connect to the p-trap
drain-please refer to those installation instruction
for assembly.
29
31
30
Let both hot and cold water run for one minute.
This will help clean any debris that might clog
the system
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

CMI 192-6445 Installation guide

CMI
Brand
CMI
Model
192-6445
Category
Sanitary ware
Type
Installation guide

CMI 192-6445 is a single-handle vessel faucet with dual function pop-up drain, designed for use with overflow or no-overflow bathroom sinks. It features a polished chrome finish and is easy to install with a single-hole mount. The faucet includes an aerator for a water-saving flow rate and a pop-up drain for easy sink draining. With its sleek design and durable construction, the CMI 192-6445 is a great choice for any bathroom remodel.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents