Pyle PLCM26.5 Owner's manual

Type
Owner's manual

This manual is also suitable for

Pyle PLCM26.5 is a digital backup camera system designed to assist drivers in detecting potential hazards while reversing. It features a wide-angle lens to provide a clear view of the area behind the vehicle and assisted low-light performance for improved visibility in low-light conditions. The camera is designed to be mounted above the license plate for optimal positioning and is connected to the vehicle's reverse light for automatic activation when the vehicle is shifted into reverse gear.

Pyle PLCM26.5 is a digital backup camera system designed to assist drivers in detecting potential hazards while reversing. It features a wide-angle lens to provide a clear view of the area behind the vehicle and assisted low-light performance for improved visibility in low-light conditions. The camera is designed to be mounted above the license plate for optimal positioning and is connected to the vehicle's reverse light for automatic activation when the vehicle is shifted into reverse gear.

WARNING:Failuretoreadandfollowthesewarningsandinstructionsmayresultinseriousinjury,includingdamaged
property,sopleasepaycloseattentionandexhibittheutmostcare.
The Digital Backup Camera is designed as an aid to the driver in detecting potentially hazardous driving conditions,
obstructions,and largestationaryobjects.You, thedriver,mustalso remembertodrivesafely andproperly.Useof the
DigitalBackupCameraisnotasubstituteforsafe,properandlegaldrivingpractices.
Neverbackupwhilelookingonlyatyourconnectedmonitordisplayscreen.Youshouldalwayscheck
behindandaround
thevehiclewhenbackingupjustasyouwould ifthevehicle didnothavetheDigitalBackupCamera.Always makesure
yourdrivingareaisclear.Alwaysbackupslowlyandwithcaution.
NeverdependontheBackupCameraentirelywhenbackingup.Theimage
onthemonitordisplayscreenmaybeslightly
different from actual and realͲtime conditions. Objects viewed in the rear view monitor differ from actual distances
becauseawideͲanglelensis used.Sousethecameraasanaidandalwaysfollowintendeddrivingpracticestoproperly
judgedistances
fromobjects.
The Backup Camera's assistedlowluxlightingperformancefeatureis also anaidtoadriver.Always use yourowneyes
toconfirm thevehicle’ssurroundings,as thedisplayedimagemay benotwelllit ornotentirelyvisible.Alwaysproceed
withcautionandperformdoubleͲchecks
beforeproceeding.
The area displayed by the Backup Camera is limited. It does not display objects that are close to or just below the
bumper,underneaththevehicle,orobjectsoutofthecamera’sview.Thecamera'sviewcanchangeaccordingtoyour
vehicle'sorientationontheroador
changingroadconditions.
Be sure to check the camera is properly functioning, is properly positioned and securely mounted, every time you
operateyourvehicle.
Makesureyourtrunkorhatchoperatescorrectly,asintended,beforeandafterinstallation.
Proceedwithcautionwhencleaning your vehicle around
thecamera.Avoidexcesswaterexposurearound the camera
especiallywithsprayingorapowerwasher.
Pleasemakesuretokeepthecameracleanandunobstructedfromanydebris
Followalltrafficlawsandmotorvehicleregulations.
Consultlocallawsandregulationsforanyrestrictionson
installation
oruse.
UsingaBackupCameraSystemisnotadequateenoughtocompletelyeliminateavehicle’sblindspot.Alwaysremember
todrivewithcaution,followingalltrafficlaws.
Pleasereadall of the installation instructionscarefully beforeinstalling the product.Improper installationwill void
manufacturer’s warranty. The installation instructions do not apply to all types of vehicles, and are written as
guidelines to assist in installing the system.Please consult an experienced technician if you are not comfortable
installing
the product.Prior to using andinstalling the BackupCamera System,pleasereadthe safety information
providedinthisusermanual.Besuretousetheproductasoutlinedinthisusermanual.Altercationormodifications
carriedoutwithoutappropriateauthorizationmayinvalidatetheuser'srighttooperatetheequipment.
SystemInstallationandWiring
Note:CameraSysteminstallationondieselvehiclesmayrequireaslightlydifferentwiringinstall.
QuickInstallation:
Thisrearviewbackupcamerasystemcomeswithcameraandinstallationwiring.Wheninstalling,thecameraispreferably
tobemountedintherearofyourvehicle(justabovethelicenseplate).
Thiskitincludes necessary wiring andcable connector accessoriessufficient for typicalconnections.
However, additional accessory cables and installation materials may be necessary for completely
secureandoperationalbackupcameraperformance.
CameraConnection:
Connectthe cameratotheusingtheincludedDC 12Vpowercable.ConnecttheDC 12Vpowercable tothepositive12V
reverse tail light in the rear of your vehicle.Then, connect the black wire, of the DC 12V power cable, and ground
properly. This connected power and ground cable
then connects to the camera, and will supply power to the camera
directly.
Next,usetheincludedyellowRCAvideoconnectorcable,and runthatcablefromthe yellowRCAvideoconnectorjackof
thecamera,totheyellowvideoconnectorofyourcompatibledisplaymonitor.
TheyellowRCAcablewhenconnected,automaticallyretrievesthevideosignalwhenactivated(whenyourvehicleisswitchedintothereversegear).
InstallationTranscript:
1.Locate thereversetaillight wiringbehindyour vehicle'sreverselight. You may needtoremove an interiorpanel,orothercover, in
ordertolocatethewiring.Connecttheincludedpower12VDCpowercabletothereverselight.
a.Connectthepowercable'sRedwiretoyourvehicle's
reverselightpositivewire.
b.Connectthepowercable'sBlackwiretoyourvehicle'sreverselightnegativewire.

2.Connectthecameratothis'reverselight'connectioninstallation,thenmountthecamerainthedesiredlocation.
3.RuntheRCAvideocablefromthecameratoyourcompatiblevideodisplay
monitor.
*Please remember to run cables in the least obtrusive route possible.Vehicle vibrations and bumpy driving conditions can
result,soextracareshouldbetakentosecurelymountthecameraandfastenallcablesandwiringtosecurelocations.
*Ensurethewiresaresafelyandsecurelyconnected,withproper
isolationappliedtoallconnections.
AdditionalNotes:
ͲDeterminethebestlocationforthecamera(Thecameraispreferablymountedjustabovethelicenseplate).
ͲBesurewhenrunningtheconnectioncablestoleaveasmallamountofslacksoyoucanstillmovethecameraaround
thelicenseplate,ifyoudecideto
slightlyadjustthecamera'spositioningatalatertime.
Ͳ After installation,Test the camera beforeuse. Placingyour vehicle in reverse should providea picturein the monitor
withintherearviewmirrorassembly.
Caution:Connecting to other types of electrical systems will causedamage to your vehicle.Please contact the manufacturerif you are
unawareofthesystemtypeinyourvehicle.Refertothemodel'spowerrequirementspriortoconnectionandinstallation.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Pyle PLCM26.5 Owner's manual

Type
Owner's manual
This manual is also suitable for

Pyle PLCM26.5 is a digital backup camera system designed to assist drivers in detecting potential hazards while reversing. It features a wide-angle lens to provide a clear view of the area behind the vehicle and assisted low-light performance for improved visibility in low-light conditions. The camera is designed to be mounted above the license plate for optimal positioning and is connected to the vehicle's reverse light for automatic activation when the vehicle is shifted into reverse gear.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI