CONTENTS
INSTALLATION TOOLS REQUIRED
FLAT SCREEN CEILING MOUNT
INSTALLATION GUIDE
Installation Safety Notes.....................................................................................................................2
System V™ Flat Screen Mount Chart................................................................................................4
Installation Instructions.......................................................................................................................5
Product Dimensions...........................................................................................................................7
B-Tech Contact Details......................................................................................................................8
PLEASE KEEP THIS FOR FUTURE REFERENCE
Flathead
screwdriver
Drill
Pencil
10mm (7/16") masonry bit
or 6mm (1/4") wood bit
The System V™ range is available in
package or component form.
This installation guide demonstrates
how to install and use the System V
™
flat screen mounting range from
B-Tech.
13mm (1/2") spanner
or socket
Saw
(Optional)
REGISTERED DESIGN
SYSTEM V™ FLAT SCREEN MOUNT CHART
4
BT5811
INSTALLATION INSTRUCTIONS
Fix the ceiling plate to the ceiling.
ONLY USE CEILING PLUG
WHEN FIXING TO
CONCRETE CEILINGS
1
5
No. 10
CEILING PLUG
BT5820
CEILING PLATE
BT5820
TRIM
M8 x 50mm
COACH SCREW
M8 WASHER
10mm
0.4"
10mm
0.4"
10mm
0.4"
SUGGESTED
CUTTING
POINTS
SAW
BT5835
O35mm POLE
OPTIONAL: Cut BT5835 pole to desired length.
TOP END
OF POLE
BOTTOM END
OF POLE
Attach the pole to the ceiling mount.
2
6
BT5835
O35mm POLE
BT5820
CEILING PLATE
M8 x 50mm
SCREW
M5 x 10mm
GRUB SCREW
3
Fix flat screen mount wall plate to
the BT5835 pole.
FLAT SCREEN MOUNT
WALL PLATE (BT7510
SHOWN AS AN EXAMPLE)
Refer to flat screen mount
instruction manual for details
of how to attach the flat
screen.
M8 WASHER
M8 SPRING WASHER
M8 x 15mm SCREW
4
*Attach BT5820-CP cover plate
(not supplied) if required.
*BT5820-CP
FLAT
SCREEN
SYSTEM V™ FLAT SCREEN CEILING MOUNT
PRODUCT DIMENSIONS
THESE INSTRUCTIONS ARE INTENDED AS A GUIDE ONLY AND B-TECH ACCEPTS NO
LIABILITY FOR THE ACCURACY OF THE INFORMATION CONTAINED IN THIS DOCUMENT.
O
150mm
5.9"
35mm
1.4"
795mm
31.3"
120mm
4.7"
120mm
4.7"
O
8.5mm
0.3"
22
mm
0.9"
8.5mm
0.3"
BT5835-075
POLE
200mm
7.9"
200mm
7.9"
200mm
7.9"
76mm
3.0"
7
BT7510 SHOWN
AS AN EXAMPLE
/
