2. Pro-Ject
  3. Amp Box DS2 Mono
Amp Box DS2 Mono

Pro-Ject Amp Box DS2 Mono Product information

  • Hello! I am an AI chatbot trained to assist you with the Pro-Ject Amp Box DS2 Mono Product information. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
PRODUCT INFORMATION
Technical data and price changes reserved.
Page 1/2
PRO-JECT AUDIO SYSTEMS
www.project-audio.com
• Audiophile PWM circuit (Pulse Wave Modulation)
• Very low distortion at very impressive bandwith
• High eciency from mains to audio power
• Multi layered PCB for short signal paths
• Line level input (RCA)
• Loop output (RCA)
• Isolated speaker outputs
• Trigger input & loop out
• Elegant aluminium - metal sandwich casing
• Available in black or silver with optional matt wooden
side panels in eucalyptus, rosewood, walnut
Output power: 120W / 205W @ 8 / 4 ohm
Frequency response: 10Hz - 50kHz (0dB, - 3dB)
Channel separation: >40dB @ 20kHz
Noise oor: >90dB
THD: < 0.1% @ 90W
Gain: 31dB
Line level input: 1x RCA
Loop output: 1x RCA
Input sensitivity: 550mV (100W, 4 ohm)
Input impedance: 100kOhm
Speaker out: 4mm Ø bananas, spades or bare wire
Trigger: 12V switching voltage
Trigger in and out: 2-pole coaxial jack Ø 2,5mm
External power supply: 48V/2,5A DC;100 - 240V, 50/60Hz
Dimensions W x D x H: 206 x 68 x 194 alu nish
240 x 69 x 194 wood nish
Weight: 1450g (alu); 1900g (wood)
AMP BOX DS2 MONO
Mono power amplier
MSRP 499 € (incl. VAT)
Incl. wood side panels MSRP 559 € (incl. VAT)
colour options:
real wood side panels:
PRODUCT INFORMATION
Technical data and price changes reserved.
Page 2/2
PRO-JECT AUDIO SYSTEMS
www.project-audio.com
Excellent sound quality combined with
compact dimensions and high energy
eciency
The heart of this audiophile amplier is a Class D module
which is highly ecient and energy saving. It delivers
high output power, to drive demanding speakers and
ll any room with pure sound, very low and frequency-
independent THD to produce the cleanest sound
possible. The top grade power amplier module
guarantees fully load-independent frequency response,
low output impedance and very low noise oor. It meets
our highest sonic standards in terms of spaciousness
and ne dynamics and provides sucient power for
excellent reproduction in normal living rooms. As a
sonic guideline for Pro-Ject ampliers the homo-
geneous liquid sound of audiophile tube ampliers are
used as benchmark. All our next generation devices
oer the possibility to come with wooden side panels.
The side panels give the products a very classy and
unique look. Three dierent nishes (rosenut, walnut
and eucalyptus) are available to meet any taste and to
match your furniture. A four layered PCB enables us to
use shorter signal paths, which are also responsible for
the improved sound compared to its predecessor. Amp
Box DS2 Mono will ll your home with the lush, energetic
and smooth sound, usually found in much more expensive
products. As additional upgrade you can use our Power
Box DS Amp to improve the soundquality even further.
The casing, made of aluminum and metal, is both elegant
and solid, to protect against vibration and deliver highest
aesthetics. The unmatched sound and the no compromise
components make it an audiophile high end bargain!
black with rosewood side panels black with walnut wood side panels black with eucalypthus wood side panels
silver with rosewood side panels silver with walnut wood side panels silver with eucalypthus wood side panels
/